Getting Started Guide¶
Use this guide to get started with your Zephyr development.
Checking Out the Source Code Anonymously¶
The Zephyr source code is hosted in a GitHub repo that supports anonymous cloning via git. There are scripts and such in this repo that you’ll need to set up your development environment, and we’ll be using Git to get this repo. (If you don’t have Git installed, see the beginning of the OS-specific instructions below for help.)
We’ll begin by using Git to clone the repository anonymously. Enter:
# On Linux/macOS cd ~ # On Windows cd %userprofile% git clone https://github.com/zephyrproject-rtos/zephyr.git
You have successfully checked out a copy of the source code to your local machine in the ~/zephyr folder.
A brief note on the Zephyr build system¶
The Zephyr project uses CMake as a tool for managing the building of the project. CMake is able to generate build files in different formats (also known as “generators”), and the following ones are currently supported by Zephyr:
make: Supported on UNIX-like platforms (Linux, macOS).
ninja: Supported on all platforms.
Most of the examples in the Zephyr documentation use ninja as a build tool but you should be able to use any generator on any of the examples listed.
Set Up the Development Environment¶
The Zephyr project supports these operating systems:
- Microsoft Windows
Use the following procedures to create a new development environment.
Building and Running an Application¶
Using the ‘Hello World’ sample application as a base model, the following section will describe the pieces necessary for creating a Zephyr application.
The processes to build and run a Zephyr application are the same across operating systems. Nevertheless, the commands needed do differ from one OS to the next. The following sections contain the commands used in a Linux development environment. If you are using macOS please use the appropriate commands for your OS.
Building a Sample Application¶
To build an example application follow these steps:
Make sure your environment is setup by exporting the following environment variables. When using the Zephyr SDK on Linux for example, type:
# On Linux/macOS export ZEPHYR_TOOLCHAIN_VARIANT=zephyr export ZEPHYR_SDK_INSTALL_DIR=<sdk installation directory> # On Windows set ZEPHYR_TOOLCHAIN_VARIANT=zephyr set ZEPHYR_SDK_INSTALL_DIR=<sdk installation directory>
In previous releases of Zephyr, the
ZEPHYR_TOOLCHAIN_VARIANTvariable was called
Navigate to the main project directory:
Set the project environment variables:
# On Linux/macOS source zephyr-env.sh # On Windows zephyr-env.cmd
Build the Hello World example for the arduino_101 board, enter:
# On Linux/macOS cd $ZEPHYR_BASE/samples/hello_world mkdir -p build/arduino_101 && cd build/arduino_101 # On Windows cd %ZEPHYR_BASE%\samples\hello_world mkdir build\arduino_101 & cd build\arduino_101 # Use cmake to configure a Ninja-based build system: cmake -GNinja -DBOARD=arduino_101 ../.. # Now run ninja on the generated build system: ninja
On Linux/macOS you can also build with
cd $ZEPHYR_BASE/samples/hello_world mkdir -p build/arduino_101 && cd build/arduino_101 # Use cmake to configure a Make-based build system: cmake -DBOARD=arduino_101 ../.. # Now run make on the generated build system: make
You can build for a different board by defining the variable BOARD with another of the supported boards, for example:
# On Linux/macOS cd $ZEPHYR_BASE/samples/hello_world mkdir -p build/arduino_due && cd build/arduino_due # On Windows cd %ZEPHYR_BASE%\samples\hello_world mkdir build\arduino_due & cd build\arduino_due # Use cmake to configure a Ninja-based build system: cmake -GNinja -DBOARD=arduino_due ../.. # Now run ninja on the generated build system: ninja
For further information on the supported boards go see here. Alternatively, run the following command to obtain a list of the supported boards:
Sample projects for different features of the project are available at
After building an application successfully, the results can be found in the
directory where cmake was invoked.
The ELF binaries generated by the build system are named by default
zephyr.elf. This value can be overridden in the application
configuration The build system generates different names for different use cases
depending on the hardware and boards used.
Building without the Zephyr SDK¶
The Zephyr SDK is provided for convenience and ease of use. It provides cross-compilers for all ports supported by the Zephyr OS and does not require any extra flags when building applications or running tests.
In addition to cross-compilers, the Zephyr SDK also provides prebuilt host tools. To use the SDK host tools alongside a custom or 3rd party cross-compiler, keep the ZEPHYR_SDK_INSTALL_DIR environment variable set to the Zephyr SDK installation directory.
To build without the Zephyr SDK’s prebuilt host tools, the ZEPHYR_SDK_INSTALL_DIR environment variable must be unset, the host tools must be built and added to path, and a 3rd party cross-compiler must be installed.
Follow the steps below to build without the Zephyr SDK:
# On Linux/macOS unset ZEPHYR_TOOLCHAIN_VARIANT unset ZEPHYR_SDK_INSTALL_DIR cd <zephyr git clone location> source zephyr-env.sh # On Windows set ZEPHYR_TOOLCHAIN_VARIANT= set ZEPHYR_SDK_INSTALL_DIR= cd <zephyr git clone location> zephyr-env.cmd
On UNIX platforms, Build Kconfig in
$ZEPHYR_BASE/buildand add it to path
cd $ZEPHYR_BASE mkdir build && cd build cmake $ZEPHYR_BASE/scripts make echo "export PATH=$PWD/kconfig:\$PATH" >> $HOME/.zephyrrc source $ZEPHYR_BASE/zephyr-env.sh
You only need to do this once after cloning the git repository.
Now that the host tools are installed, a 3rd party cross compiler must be installed. See Using Custom and 3rd Party Cross Compilers for details.
Using Custom and 3rd Party Cross Compilers¶
To use a 3rd party cross compiler that is not provided by the Zephyr SDK, follow the steps below. It is possible to use a 3rd party cross compiler and still use the Zephyr SDK’s host tools. See Building without the Zephyr SDK for details.
We will use the GCC ARM Embedded compiler for this example, download the package suitable for your operating system from the GCC ARM Embedded website and extract it on your file system. This example assumes the compiler was extracted to:
Build the example Hello World project, enter:
# On Linux/macOS export GCCARMEMB_TOOLCHAIN_PATH="~/gcc-arm-none-eabi-5_3-2016q1/" export ZEPHYR_TOOLCHAIN_VARIANT=gccarmemb # On Windows set GCCARMEMB_TOOLCHAIN_PATH="%userprofile%\gcc-arm-none-eabi-5_3-2016q1\" set ZEPHYR_TOOLCHAIN_VARIANT=gccarmemb
# On Linux/macOS cd $ZEPHYR_BASE/samples/hello_world mkdir build && cd build # On Windows cd %ZEPHYR_BASE%\samples\hello_world mkdir build & cd build # Use cmake to configure a Ninja-based build system: cmake -GNinja -DBOARD=arduino_due .. # Now run ninja on the generated build system: ninja
Running a Sample Application in QEMU¶
To perform rapid testing of an application in the development environment you can use the QEMU emulation board configuration available for both X86 and ARM Cortex-M3 architectures. This can be easily accomplished by calling a special target when building an application that invokes QEMU once the build process is completed.
To run an application using the x86 emulation board configuration (qemu_x86), type:
cd $ZEPHYR_BASE/samples/hello_world mkdir build && cd build # Use cmake to configure a Ninja-based build system: cmake -GNinja -DBOARD=qemu_x86 .. # Now run ninja on the generated build system: ninja ninja run
To exit the qemu emulator, press
Ctrl-a, followed by
qemu_cortex_m3 board configuration to test the ARM build.
QEMU is not supported on all boards and SoCs. When developing for a specific hardware target you should always test on the actual hardware and should not rely on testing in the QEMU emulation environment only.
Running a Sample Application natively (POSIX OS)¶
It is also possible to compile some of the sample and test applications to run as native process on a POSIX OS (e.g. Linux). To be able to do this, remember to have installed the 32 bit libC if your OS is natively 64bit.
To compile and run an application in this way, type:
cd $ZEPHYR_BASE/samples/hello_world mkdir build && cd build # Use cmake to configure a Ninja-based build system: cmake -GNinja -DBOARD=native_posix .. # Now run ninja on the generated build system: ninja
ninja run # or just: zephyr/zephyr.exe # Press Ctrl+C to exit
This executable can be instrumented like any other Linux process. For ex. with gdb or valgrind. Note that the native port is currently only tested in Linux.