Help¶

PLL R Output divisor, allowed values: 0, 2, 4, 6, 8.

Direct dependencies¶

(CLOCK_STM32_PLL_SRC_HSI && CLOCK_STM32_SYSCLK_SRC_PLL && BOARD_DISCO_L475_IOT1) || (CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL)

(Includes any dependencies from if’s and menus.)

Defaults¶

4 if CLOCK_STM32_PLL_SRC_HSI && CLOCK_STM32_SYSCLK_SRC_PLL && BOARD_DISCO_L475_IOT1
4 if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL

Kconfig definitions¶

At boards/arm/disco_l475_iot1/Kconfig.defconfig:53

Included via Kconfig:10 → Kconfig.zephyr:19

Menu path: (top menu)

config CLOCK_STM32_PLL_R_DIVISOR
    int
    default 4 if CLOCK_STM32_PLL_SRC_HSI && CLOCK_STM32_SYSCLK_SRC_PLL && BOARD_DISCO_L475_IOT1
    depends on CLOCK_STM32_PLL_SRC_HSI && CLOCK_STM32_SYSCLK_SRC_PLL && BOARD_DISCO_L475_IOT1

At drivers/clock_control/Kconfig.stm32:361

Included via Kconfig:10 → Kconfig.zephyr:29 → drivers/Kconfig:54 → drivers/clock_control/Kconfig:45

Menu path: (top menu) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control

config CLOCK_STM32_PLL_R_DIVISOR
    int
    prompt "PLL R Divisor" if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    range 0 8 if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    default 4 if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    depends on CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    help
      PLL R Output divisor, allowed values: 0, 2, 4, 6, 8.

(Definitions include propagated dependencies, including from if’s and menus.)