Direct dependencies¶

(FLASH && SPI && BOARD_ARDUINO_101_SSS) || (SPI_0 && SPI_INTEL && SPI && SOC_SERIES_QUARK_X1000) || (SPI_CS_GPIO && SPI_0 && SPI)

(Includes any dependencies from if’s and menus.)

Defaults¶

“GPIO_2” if FLASH && SPI && BOARD_ARDUINO_101_SSS
“GPIO_0” if SPI_0 && SPI_INTEL && SPI && SOC_SERIES_QUARK_X1000
“GPIO_0” if SPI_CS_GPIO && SPI_0 && SPI

Kconfig definitions¶

At boards/arc/arduino_101_sss/Kconfig.defconfig:25

Included via Kconfig:10 → Kconfig.zephyr:19

Menu path: (top menu)

config SPI_0_CS_GPIO_PORT
    string
    default "GPIO_2" if FLASH && SPI && BOARD_ARDUINO_101_SSS
    depends on FLASH && SPI && BOARD_ARDUINO_101_SSS

At arch/x86/soc/intel_quark/quark_x1000/Kconfig.defconfig.series:150

Included via Kconfig:10 → Kconfig.zephyr:20 → arch/x86/soc/intel_quark/Kconfig.defconfig:1

Menu path: (top menu)

config SPI_0_CS_GPIO_PORT
    string
    default "GPIO_0" if SPI_0 && SPI_INTEL && SPI && SOC_SERIES_QUARK_X1000
    depends on SPI_0 && SPI_INTEL && SPI && SOC_SERIES_QUARK_X1000

At drivers/spi/Kconfig:84

Included via Kconfig:10 → Kconfig.zephyr:29 → drivers/Kconfig:38

Menu path: (top menu) → Device Drivers → SPI hardware bus support

config SPI_0_CS_GPIO_PORT
    string
    prompt "The GPIO port which is used to control CS" if SPI_CS_GPIO && SPI_0 && SPI
    default "GPIO_0" if SPI_CS_GPIO && SPI_0 && SPI
    depends on SPI_CS_GPIO && SPI_0 && SPI

(Definitions include propagated dependencies, including from if’s and menus.)