Help¶

The interrupt priority for UART port.

Direct dependencies¶

(UART_NS16550_PORT_0 && UART_NS16550 && SOC_NIOS2F_ZEPHYR) || (UART_NS16550_PORT_0 && UART_NS16550 && SOC_RISCV32_PULPINO) || (UART_NS16550_PORT_0 && !HAS_DTS && !ARC && !HAS_DTS && SERIAL)

(Includes any dependencies from if’s and menus.)

Defaults¶

3 if UART_NS16550_PORT_0 && UART_NS16550 && SOC_NIOS2F_ZEPHYR
0 if UART_NS16550_PORT_0 && UART_NS16550 && SOC_RISCV32_PULPINO
0 if UART_NS16550_PORT_0 && !HAS_DTS && !ARC && !HAS_DTS && SERIAL

Kconfig definitions¶

At arch/nios2/soc/nios2f-zephyr/Kconfig.defconfig:52

Included via Kconfig:10 → Kconfig.zephyr:20

Menu path: (top menu)

config UART_NS16550_PORT_0_IRQ_PRI
    int
    default 3 if UART_NS16550_PORT_0 && UART_NS16550 && SOC_NIOS2F_ZEPHYR
    depends on UART_NS16550_PORT_0 && UART_NS16550 && SOC_NIOS2F_ZEPHYR

At arch/riscv32/soc/pulpino/Kconfig.defconfig:67

Included via Kconfig:10 → Kconfig.zephyr:20

Menu path: (top menu)

config UART_NS16550_PORT_0_IRQ_PRI
    int
    default 0 if UART_NS16550_PORT_0 && UART_NS16550 && SOC_RISCV32_PULPINO
    depends on UART_NS16550_PORT_0 && UART_NS16550 && SOC_RISCV32_PULPINO

At drivers/serial/Kconfig.ns16550:70

Included via Kconfig:10 → Kconfig.zephyr:29 → drivers/Kconfig:22 → drivers/serial/Kconfig:58

Menu path: (top menu) → Device Drivers → Serial Drivers

config UART_NS16550_PORT_0_IRQ_PRI
    int
    prompt "Port 0 Interrupt Priority" if UART_NS16550_PORT_0 && !HAS_DTS && !ARC && !HAS_DTS && SERIAL
    default 0 if UART_NS16550_PORT_0 && !HAS_DTS && !ARC && !HAS_DTS && SERIAL
    depends on UART_NS16550_PORT_0 && !HAS_DTS && !ARC && !HAS_DTS && SERIAL
    help
      The interrupt priority for UART port.

(Definitions include propagated dependencies, including from if’s and menus.)