HTS221: Temperature and Humidity Monitor

Overview

This sample periodically reads temperature and humidity from the HTS221 Temperature & Humidity Sensor and displays it on the console

Requirements

This sample uses the HTS221 sensor controlled using the I2C interface.

Building and Running

This project outputs sensor data to the console. It requires an HTS221 sensor, which is present on the disco_l475_iot1 board.
# On Linux/macOS
cd $ZEPHYR_BASE/samples/sensors/hts221
mkdir build && cd build
# On Windows
cd %ZEPHYR_BASE%\samples\sensors\hts221
mkdir build & cd build
cmake -GNinja -DBOARD=disco_l475_iot1 ..
ninja

Sample Output

Temperature:25.3 C
Relative Humidity:40%
Temperature:25.3 C
Relative Humidity:40%
Temperature:25.3 C
Relative Humidity:40%
Temperature:25.3 C
Relative Humidity:40%

<repeats endlessly every 2 seconds>