The latest development version of this page may be more current than this released 1.14.1 version.

CONFIG_SPI_2_NRF_ORC

SPI Port 2 over-read character

Type: hex

Help

Over-read character. Character clocked out after an over-read of the transmit buffer.

Direct dependencies

(SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS) && SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE) && SPI_NRFX && SPI

(Includes any dependencies from if’s and menus.)

Defaults

• 0xff if (SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS) && SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE) && SPI_NRFX && SPI

Kconfig definition

At drivers/spi/Kconfig.nrfx:158

Included via Kconfig:10 → Kconfig.zephyr:35 → drivers/Kconfig:36 → drivers/spi/Kconfig:205

Menu path: (top menu) → Device Drivers → SPI hardware bus support → nRF SPI nrfx drivers

config SPI_2_NRF_ORC
    hex
    prompt "SPI Port 2 over-read character" if (SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS) && SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE) && SPI_NRFX && SPI
    range 0x00 0xff if (SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS) && SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE) && SPI_NRFX && SPI
    default 0xff if (SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS) && SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE) && SPI_NRFX && SPI
    depends on (SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS) && SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE) && SPI_NRFX && SPI
    help
      Over-read character. Character clocked out after an over-read
      of the transmit buffer.

(Definitions include propagated dependencies, including from if’s and menus.)