-
CONFIG_LIS2DW12_PULSE_THSX¶
Pulse X-axis threshold
Type: hex
Help¶
Threshold to start the pulse-event detection procedure on the X-axis. Threshold values for each axis are unsigned 5-bit corresponding to an 2g acceleration full-scale range.
Direct dependencies¶
LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR
(Includes any dependencies from ifs and menus.)
Default¶
0x0E
Kconfig definition¶
At drivers/sensor/lis2dw12/Kconfig:88
Included via Kconfig:8 → Kconfig.zephyr:32 → drivers/Kconfig:62 → drivers/sensor/Kconfig:115
Menu path: (Top) → Device Drivers → Sensor Drivers → LIS2DW12 I2C/SPI accelerometer sensor driver → Pulse detection
config LIS2DW12_PULSE_THSX
hex "Pulse X-axis threshold"
range 0 0x1F
default 0x0E
depends on LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR
help
Threshold to start the pulse-event detection procedure on the X-axis.
Threshold values for each axis are unsigned 5-bit corresponding
to an 2g acceleration full-scale range.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)