CONFIG_MCR20A_IS_PART_OF_KW2XD_SIP¶
MCR20A device is part of KW2xD SiP
Type: bool
Help¶
If this option is set, the driver does not perform a hardware
reset and the CLK_OUT frequency is not set, instead these settings
are performed during the initialization of the SoC.
Direct dependencies¶
(IEEE802154_MCR20A && BOARD_USB_KW24D512) || (IEEE802154_MCR20A && IEEE802154)
(Includes any dependencies from ifs and menus.)
Default¶
y
Kconfig definitions¶
At boards/arm/usb_kw24d512/Kconfig.defconfig:27
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config MCR20A_IS_PART_OF_KW2XD_SIP
bool
default y
depends on IEEE802154_MCR20A && BOARD_USB_KW24D512
At drivers/ieee802154/Kconfig.mcr20a:18
Included via Kconfig:8 → Kconfig.zephyr:42 → drivers/Kconfig:10 → drivers/ieee802154/Kconfig:66
Menu path: (Top) → Device Drivers → IEEE 802.15.4 drivers options → NXP MCR20A Driver support
config MCR20A_IS_PART_OF_KW2XD_SIP
bool "MCR20A device is part of KW2xD SiP"
depends on IEEE802154_MCR20A && IEEE802154
help
If this option is set, the driver does not perform a hardware
reset and the CLK_OUT frequency is not set, instead these settings
are performed during the initialization of the SoC.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)