The latest development version of this page may be more current than this released 3.7.0 version.

microchip,xec-pcr

Vendor: Microchip Technology Inc.

Description

Microchip XEC Power Clock Reset and VBAT register (PCR)

Properties

Node specific propertiesDeprecated node specific propertiesBase properties

Properties not inherited from the base binding file.

Name	Type	Details
#clock-cells	int	Number of items to expect in a Clock specifier This property is required. Constant value: 3
pinctrl-0	phandles	Pin configuration/s for the first state. Content is specific to the selected pin controller driver implementation.
pinctrl-1	phandles	Pin configuration/s for the second state. See pinctrl-0.
pinctrl-2	phandles	Pin configuration/s for the third state. See pinctrl-0.
pinctrl-3	phandles	Pin configuration/s for the fourth state. See pinctrl-0.
pinctrl-4	phandles	Pin configuration/s for the fifth state. See pinctrl-0.
pinctrl-names	string-array	Names for the provided states. The number of names needs to match the number of states.
core-clock-div	int	Divide 96 MHz PLL clock to produce Cortex-M4 core clock This property is required.
slow-clock-div	int	PWM and TACH clock domain divided down from 48 MHz AHB clock. The default value is 480 for 100 kHz.
pll-32k-src	int	32 KHz clock source for PLL This property is required.
periph-32k-src	int	32 KHz clock source for peripherals This property is required.
xtal-single-ended	boolean	Use single ended crystal connection to XTAL2 pin.
clk32kmon-period-min	int	32KHz clock monitor minimum valid 32KHz period in 48MHz units This property is required.
clk32kmon-period-max	int	32KHz clock monitor maximum valid 32KHz period in 48MHz units This property is required.
clk32kmon-duty-cycle-var-max	int	Maximum duty cycle variation. Difference in units of 48HMz between the measured 32KHz high and low pulse widths. This property is required.
clk32kmon-valid-min	int	Minimum number of consecutive 32KHz pulses that pass all monitor tests This property is required.
xtal-enable-delay-ms	int	Delay in milliseconds after crystal is enabled and clock monitor is started. This property is required. Default value: 300
pll-lock-timeout-ms	int	Timeout in milliseconds waiting for PLL to lock to new clock source. This property is required. Default value: 30
clkmon-bypass	boolean	Bypass clkmon check of crystal or XTAL2 single-ended clock.
internal-osc-disable	boolean	If the internal silicon 32KHz oscillator is not chosen as the source for PLL and Periheral devices then disable the internal 32KHz oscillator to save power.

Specifier cell names

• clock cells: regidx, bitpos, domain