The latest development version of this page may be more current than this released 3.7.0 version.

x-powers,axp192-gpio

Vendor: X-Powers

Description

AXP192 GPIO Controller
AX192 features 5 native GPIOs. In addition the EXTEN pin can be configured to be used as an IO as well.
Pin-Mapping is as follows [0] GPIO0 [1] GPIO1 [2] GPIO2 [3] GPIO3 [4] GPIO4 [5] EXTEN

Properties

Top level properties

These property descriptions apply to “x-powers,axp192-gpio” nodes themselves. This page also describes child node properties in the following sections.

Properties not inherited from the base binding file.

Name

Type

Details

gpio-controller

boolean

 
Convey's this node is a GPIO controller

This property is required.

#gpio-cells

int

 
Number of items to expect in a GPIO specifier

This property is required.

Constant value: 2

ngpios

int

 
Number of GPIOs available on axp192.

This property is required.

Default value: 32

Constant value: 6

gpio-reserved-ranges

array

 
If not all the GPIOs at offsets 0...N-1 are usable for ngpios = <N>, then
this property contains an additional set of tuples which specify which GPIOs
are unusable. This property indicates the start and size of the GPIOs
that can't be used.

For example, setting "gpio-reserved-ranges = <3 2>, <10 1>;" means that
GPIO offsets 3, 4, and 10 are not usable, even if ngpios = <18>.

gpio-line-names

string-array

 
This is an array of strings defining the names of the GPIO lines
going out of the GPIO controller

Child node properties

Name

Type

Details

gpio-hog

boolean

 
Conveys this node is a GPIO hog.

This property is required.

gpios

array

 
This is an array of GPIO specifiers (e.g. pin, flags) to be hogged. The number of array
entries must be an integer multiple of the number of GPIO specifier cells for the parent
GPIO controller.

This property is required.

input

boolean

 
If this property is set, the GPIO is configured as an input. This property takes
precedence over the output-low and output-high properties.

output-low

boolean

 
If this property is set, the GPIO is configured as an output set to logical low. This
property takes precedence over the output-high property.

output-high

boolean

 
If this property is set, the GPIO is configured as an output set to logical high.

line-name

string

 
Optional GPIO line name.

Specifier cell names

  • gpio cells: pin, flags