ite,it8xxx2-pinctrl-func
Vendor: ITE Tech. Inc.
Description
ITE IT8XXX2 pin controller function node
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
|
|
|
|
|
|
When the alternate setting is configured as func3, in addition to
the setting of func3-gcr, some pins require external setting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KSI[7:0] does not support push-pull and open-drain mode.
If KSO[17:0] is in KBS mode, setting 1 selects open-drain mode,
setting 0 selects push-pull mode.
If KSO[15:0] is in GPIO mode, then this bit is always disabled.
|
|
|
If KSI[7:0]/KSO[15:0] is in KBS mode , setting 1 enables the internal
pull-up (KSO[17:16] setting internal pull-up by GPIO port GPCR register).
If KSI[7:0]/KSO[15:0] is in GPIO mode, then this bit is always disabled.
|
|
|
Default setting pin configure to alternate mode for all GPIO group pins
(include KSO[17:16]), otherwise setting pin configure to keyboard scan
mode for KSI[7:0] and KSO[15:0] pins.
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “ite,it8xxx2-pinctrl-func” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Power domain the device belongs to.
The device will be notified when the power domain it belongs to is either
suspended or resumed.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
Specifier cell names
pinmux cells: pin, alt_func