Networking with native_sim board
Using virtual/TAP Ethernet driver
This paragraph describes how to set up a virtual network between a (Linux) host and a Zephyr application running in a native_sim board.
In this example, the Echo server (advanced) sample application from the Zephyr source distribution is run in native_sim board. The Zephyr native_sim board instance is connected to a Linux host using a tuntap device which is modeled in Linux as an Ethernet network interface.
Prerequisites
On the Linux Host, fetch the Zephyr net-tools project, which is located
in a separate Git repository:
git clone https://github.com/zephyrproject-rtos/net-tools
Basic Setup
For the steps below, you will need three terminal windows:
Terminal #1 is terminal window with net-tools being the current directory (
cd net-tools)Terminal #2 is your usual Zephyr development terminal, with the Zephyr environment initialized.
Terminal #3 is the console to the running Zephyr native_sim instance (optional).
Step 1 - Create Ethernet interface
Before starting native_sim with network emulation, a network interface should be created.
In terminal #1, type:
./net-setup.sh
You can tweak the behavior of the net-setup.sh script. See various options
by running net-setup.sh like this:
./net-setup.sh --help
Step 2 - Start app in native_sim board
Build and start the echo_server sample application.
In terminal #2, type:
west build -b native_sim samples/net/sockets/echo_server
west build -t run
Step 3 - Connect to console (optional)
The console window should be launched automatically when the Zephyr instance is started but if it does not show up, you can manually connect to the console. The native_sim board will print a string like this when it starts:
UART connected to pseudotty: /dev/pts/5
You can manually connect to it like this:
screen /dev/pts/5
Using offloaded sockets
The main advantage over Using virtual/TAP Ethernet driver is not needing to setup a virtual network interface on the host machine. This means that no leveraged (root) privileges are needed.
Step 1 - Start app in native_sim board
Build and start the echo_server sample application:
west build -b native_sim samples/net/sockets/echo_server -- -DEXTRA_CONF_FILE=overlay-nsos.conf
west build -t run
Step 2 - run echo-client from net-tools
On the Linux Host, fetch the Zephyr net-tools project, which is located
in a separate Git repository:
git clone https://github.com/zephyrproject-rtos/net-tools
Note
Native Simulator with the offloaded sockets network driver is using the same
network interface/namespace as any other (Linux) application that uses BSD
sockets API. This means that Echo server (advanced) and
echo-client applications will communicate over localhost/loopback
interface (address 127.0.0.1).
To run UDP test, type:
./echo-client 127.0.0.1
For TCP test, type:
./echo-client -t 127.0.0.1