RISCV32 Virtual
Overview
The RISCV32 Virtual board is a virtual platform made with Renode as an alternative to QEMU.
Contrary to QEMU, the peripherals of this platform can be easily configured by editing the
riscv32_virtual.repl script and the devicetree files accordingly, this allows certain hardware
configurations that only exist in proprietary boards/SoCs to be tested in upstream CI.
Programming and debugging
Building
Applications for the riscv32_virtual board configuration can be built as usual
(see Building an Application):
west build -b riscv32_virtual
Flashing
While this board is emulated and you can’t “flash” it, you can use this configuration to run basic Zephyr applications and kernel tests in the Renode emulated environment. For example, with the Basic Synchronization sample:
# From the root of the zephyr repository
west build -b riscv32_virtual samples/synchronization
west build -t run
This will build an image with the synchronization sample app, boot it using Renode, and display the following console output:
*** Booting Zephyr OS build zephyr-v3.5.0-1511-g56f73bde0fb0 ***
thread_a: Hello World from cpu 0 on riscv32_virtual!
thread_b: Hello World from cpu 0 on riscv32_virtual!
thread_a: Hello World from cpu 0 on riscv32_virtual!
thread_b: Hello World from cpu 0 on riscv32_virtual!
Exit Renode by pressing CTRL+C.
Debugging
Refer to the detailed overview about Application Debugging.