Open103Z
Overview
The Waveshare Open103Z-64 is a development board equipped with STM32F103ZE MCU.
Hardware
The Waveshare Open103Z provides the following hardware components:
Supported Features
The Waveshare Open103Z configuration supports the following hardware features:
Interface |
Controller |
Driver/Component |
|---|---|---|
NVIC |
on-chip |
nested vectored interrupt controller |
ADC |
on-chip |
adc |
UART |
on-chip |
serial port |
GPIO |
on-chip |
gpio |
FLASH |
on-chip |
flash |
SPI |
on-chip |
spi |
I2C |
on-chip |
i2c |
CAN |
on-chip |
can (disabled by default) |
USB |
on-chip |
usb |
Programming and Debugging
Applications for the waveshare_open103z board configuration can be built and
flashed in the usual way.
Flashing
Build and flash applications as usual. Here is an example for the Hello World application.
# From the root of the zephyr repository
west build -b waveshare_open103z samples/hello_world
west flash
Debugging
Debug applications as usual. Here is an example for the Hello World application.
# From the root of the zephyr repository
west build -b waveshare_open103z samples/hello_world
west debug