The latest development version of this page may be more current than this released 4.0.0 version.

nuvoton,numaker-scc

Note

An implementation of a driver matching this compatible is available in drivers/clock_control/clock_control_numaker_scc.c.

Description

Nuvoton NuMaker System Clock Controller (SCC)

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`hxt`	`string`	Enable/disable 4~24 MHz external crystal oscillator (HXT) Legal values: `'untouched'`, `'enable'`, `'disable'`
`lxt`	`string`	Enable/disable 32.768 kHz low-speed external crystal oscillator (LXT) Legal values: `'untouched'`, `'enable'`, `'disable'`
`hirc48m`	`string`	Enable/disable 48 MHz high-speed internal RC oscillator (HIRC48) Legal values: `'untouched'`, `'enable'`, `'disable'`
`clk-pclkdiv`	`int`	Configure APB Clock Divider register
`core-clock`	`int`	Configure core clock (HCLK)
`powerdown-mode`	`int`	Configure power down mode, please choose one of NUMAKER_CLK_PMUCTL_PDMSEL_XXX from numaker_xxx_clock.h
`#clock-cells`	`int`	Number of items to expect in a Clock specifier This property is required.

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nuvoton,numaker-scc” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts`	`array`	interrupts for device See Important properties for more information.
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information. This property is deprecated.
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`power-domains`	`phandle-array`	Power domain specifiers
`power-domain-names`	`string-array`	Provided names of power domain specifiers
`#power-domain-cells`	`int`	Number of cells in power-domains property
`zephyr,deferred-init`	`boolean`	Do not initialize device automatically on boot. Device should be manually initialized using device_init().
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
`zephyr,pm-device-runtime-auto`	`boolean`	Automatically configure the device for runtime power management after the init function runs.
`zephyr,disabling-power-states`	`phandles`	List of power states that will disable this device power.