st,stm32c0-hsi-clock
Vendor: STMicroelectronics
Description
STM32 HSI Clock node description for STM32C0 devices
On STM32C0, HSI is a 48MHz fixed clock.
It also produces a HSISYS secondary clk which can be used as system clock
source. In that case, a HSI divisor (ranges from 1 to 128) can be applied:
SYSCLK = HSI48 / HSI DIV
enum:
- 1 ==> HSISYS = 48MHZ
- 2 ==> HSISYS = 24MHZ
- 4 ==> HSISYS = 12MHZ
- 8 ==> HSISYS = 6MHZ
- 16 ==> HSISYS = 3MHZ
- 32 ==> HSISYS = 1.5MHz
- 64 ==> HSISYS = 0.75MHZ
- 128 ==> HSISYS = 0.375MHz
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
HSI clock divider. Configures the output HSI clock frequency (HSISYS).
This property is required. Legal values: |
|
|
output clock frequency (Hz)
This property is required. |
|
|
Number of items to expect in a Clock specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32c0-hsi-clock” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|