The latest development version of this page may be more current than this released 4.0.0 version.

silabs,gecko-ethernet

Note

An implementation of a driver matching this compatible is available in drivers/ethernet/eth_gecko.c.

Description

SiLabs Gecko Ethernet

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`phy-address`	`int`	address of the PHY on the MDIO bus This property is required.
`location-rmii`	`int`	location of RMII pins, configuration defined as <location> This property is required.
`location-mdio`	`int`	location of MDC and MDIO pins, configuration defined as <location> This property is required.
`location-phy_mdc`	`array`	PHY MDC individual pin configuration defined as <location port pin> This property is required.
`location-phy_mdio`	`array`	PHY MDIO individual pin configuration defined as <location port pin> This property is required.
`location-rmii_refclk`	`array`	Reference clock individual pin configuration defined as <location port pin> This property is required.
`location-rmii_crs_dv`	`array`	Receive data valid individual pin configuration defined as <location port pin> This property is required.
`location-rmii_txd0`	`array`	Transmit data 0 individual pin configuration defined as <location port pin> This property is required.
`location-rmii_txd1`	`array`	Transmit data 1 individual pin configuration defined as <location port pin> This property is required.
`location-rmii_tx_en`	`array`	Transmit enable individual pin configuration defined as <location port pin> This property is required.
`location-rmii_rxd0`	`array`	Receive data 0 individual pin configuration defined as <location port pin> This property is required.
`location-rmii_rxd1`	`array`	Receive data 1 individual pin configuration defined as <location port pin> This property is required.
`location-rmii_rx_er`	`array`	Receive error individual pin configuration defined as <location port pin> This property is required.
`location-phy_pwr_enable`	`array`	PHY power enable individual pin configuration defined as <port pin>
`location-phy_reset`	`array`	PHY reset individual pin configuration defined as <port pin>
`location-phy_interrupt`	`array`	PHY interrupt individual pin configuration defined as <port pin>
`local-mac-address`	`uint8-array`	Specifies the MAC address that was assigned to the network device
`zephyr,random-mac-address`	`boolean`	Use a random MAC address generated when the driver is initialized. Note that using this choice and rebooting a board may leave stale MAC address in peers' ARP caches and lead to issues and delays in communication. (Use "ip neigh flush all" on Linux peers to clear ARP cache.) It is driver specific how the OUI octets are handled. If set we ignore any setting of the local-mac-address property.
`phy-handle`	`phandle`	Specifies a reference to a node representing a PHY device.
`phy-connection-type`	`string`	Specifies the interface connection type between ethernet MAC and PHY. Legal values: `'mii'`, `'rmii'`, `'gmii'`, `'rgmii'`

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “silabs,gecko-ethernet” compatible.

Name	Type	Details
`reg`	`array`	mmio register space This property is required. See Important properties for more information.
`interrupts`	`array`	required interrupts This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information. This property is deprecated.
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`power-domains`	`phandle-array`	Power domain specifiers
`power-domain-names`	`string-array`	Provided names of power domain specifiers
`#power-domain-cells`	`int`	Number of cells in power-domains property
`zephyr,deferred-init`	`boolean`	Do not initialize device automatically on boot. Device should be manually initialized using device_init().
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
`zephyr,pm-device-runtime-auto`	`boolean`	Automatically configure the device for runtime power management after the init function runs.
`zephyr,disabling-power-states`	`phandles`	List of power states that will disable this device power.