arm,scmi
Vendor: ARM Ltd.
Note
An implementation of a driver matching this compatible is available in drivers/firmware/scmi.
Description
System Control and Management Interface (SCMI) with doorbell
and shared memory (SHMEM) transport.
Devicetree example:
#include <mem.h>
scmi_res0: memory@44611000 {
compatible = "arm,scmi-shmem";
reg = <0x44611000 0x80>;
};
mu5: mailbox@44610000 {
compatible = "nxp,mbox-imx-mu";
reg = <0x44610000 DT_SIZE_K(4)>;
interrupts = <205 0>;
#mbox-cells = <1>;
};
scmi {
compatible = "arm,scmi";
shmem = <&scmi_res0>;
mboxes = <&mu5 0>;
mbox-names = "tx";
protocol@14 {
compatible = "arm,scmi-clock";
reg = <0x14>;
#clock-cells = <1>;
};
protocol@19 {
compatible = "arm,scmi-pinctrl";
reg = <0x19>;
pinctrl {
compatible = "nxp,imx95-pinctrl", "nxp,imx93-pinctrl";
};
};
};
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Phandle to node describing TX channel shared memory area.
This translates to a **single** SCMI transmit channel.
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “arm,scmi” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
List of mailbox channel specifiers. It should contain one or two specifiers:
1) tx - 1 mbox / 1 shmem (platform and agent use the same
mailbox channel for signaling)
2) tx_reply - 2 mbox / 1 shmem (platform and agent use different
mailbox channels for signaling)
This property is required. |
|
|
mailbox channel specifier names
This property is required. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|