atmel,sam-supc
Vendor: Atmel Corporation
Description
Atmel SAM SUPC (Supply-Controller) controller
The supply controller manages the voltage reference, power supply and supply
monitoring of the device. It have a special feature that it can wake-up the
device from a low-power state using special peripherals as wake-up sources.
The dedicated peripherals that can wake-up the core supply domain are: RTC,
RTT, Supply Monitor and GPIOs. In the first three peripherals it is necessary
inform the wakeup-source-id property on their respective nodes.
rtc: rtc@xxx {
...
wakeup-source-id = <&supc SUPC_WAKEUP_SOURCE_RTC>;
...
};
The special peripheral will wake-up the device only when the standard property
wakeup-source is defined, e.g.:
&rtc {
...
wakeup-source;
...
};
The SUPC wakeup source ids that can be enabled are defined in the
zephyr/include/zephyr/dt-bindings/power/atmel_sam_supc.h header file.
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Constant value: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel,sam-supc” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
Specifier cell names
wakeup-source-id cells: wakeup-source-id