st,stm32-timers
Vendor: STMicroelectronics
Description
STM32 timers
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Reset information
This property is required. |
|
|
Clock prescaler at the input of the timer
Could be in range [0 .. 0xFFFF] for STM32 General Purpose Timers (CLK/(prescaler+1) )
This property is required. |
|
|
Sets timer counter mode.
Use constants defined in dt-bindings/timer/stm32-timer.h.
* STM32_TIM_COUNTERMODE_UP - used as upcounter.
* STM32_TIM_COUNTERMODE_DOWN - used as downcounter.
* STM32_TIM_COUNTERMODE_CENTER_DOWN - counts up and down alternatively.
Output compare interrupt flags of output channels
are set only when the counter is counting down.
* STM32_TIM_COUNTERMODE_CENTER_UP - counts up and down alternatively.
Output compare interrupt flags of output channels
are set only when the counter is counting up.
* STM32_TIM_COUNTERMODE_CENTER_UP_DOWN - counts up and down alternatively.
Output compare interrupt flags of output channels
are set only when the counter is counting up or
down.
If absent, then STM32_TIM_COUNTERMODE_UP is used (reset state).
|
|
|
Name of each reset
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-timers” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
Clock gate information
This property is required. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|