adi,max32-w1
Vendor: Analog Devices, Inc.
Note
An implementation of a driver matching this compatible is available in drivers/w1/w1_max32.c.
Description
These nodes are “w1” bus nodes.
ADI MAX32xxx MCUs 1-Wire Master
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Pin configuration/s for the first state. Content is specific to the
selected pin controller driver implementation.
This property is required. |
|
|
Names for the provided states. The number of names needs to match the
number of states.
This property is required. |
|
|
Set this field to enable the internal pullup resistor.
0 - Internal pullup disabled.
1 - Internal pullup enabled.
This property is required. Legal values: |
|
|
Set this field to enable the external pullup.
0 - Pullup pin is active high when enabled.
1 - Pullup pin is active low when enabled.
2 - Pullup pin is not used for an external pullup.
Legal values: |
|
|
Long Line Mode Enable
Selects alternate timings for 1-Wire communication.
The recommended setting depends on the length of the wire.
For lines less than 40 meters, 0 should be used.
Setting this bit to 0 leaves the write one release,
the data sampling, and the time-slot recovery times at
approximately 5us (micro second), 15us, and 7us, respectively.
Setting this bit to 1 enables long line mode timings during standard mode communications.
This mode moves the write one release, the data sampling,
and the time-slot recovery times out to approximately 8us, 22us, and 14us, respectively.
0 - Standard operation for lines less than 40 meters.
1 - Long Line mode enabled.
|
|
|
Enable the active pullup for the 1-Wire bus.
|
|
|
Pin configuration/s for the second state. See pinctrl-0.
|
|
|
Pin configuration/s for the third state. See pinctrl-0.
|
|
|
Pin configuration/s for the fourth state. See pinctrl-0.
|
|
|
Pin configuration/s for the fifth state. See pinctrl-0.
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “adi,max32-w1” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
Clock gate information
This property is required. |
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|