Generic Access Profile (GAP)

Generic Access Profile (GAP) . More...

Topics
	Defines and Assigned Numbers
	Bluetooth Generic Access Profile defines and Assigned Numbers.

Data Structures
struct	bt_le_ext_adv_sent_info
struct	bt_le_ext_adv_connected_info
struct	bt_le_ext_adv_scanned_info
struct	bt_le_per_adv_data_request
struct	bt_le_per_adv_response_info
struct	bt_le_ext_adv_cb
struct	bt_data
	Bluetooth data. More...
struct	bt_le_adv_param
	LE Advertising Parameters. More...
struct	bt_le_per_adv_param
struct	bt_le_ext_adv_start_param
struct	bt_le_ext_adv_info
	Advertising set info structure. More...
struct	bt_le_per_adv_subevent_data_params
struct	bt_le_per_adv_sync_synced_info
struct	bt_le_per_adv_sync_term_info
struct	bt_le_per_adv_sync_recv_info
struct	bt_le_per_adv_sync_state_info
struct	bt_le_per_adv_sync_cb
struct	bt_le_per_adv_sync_param
struct	bt_le_per_adv_sync_info
	Advertising set info structure. More...
struct	bt_le_per_adv_sync_transfer_param
struct	bt_le_scan_param
	LE scan parameters. More...
struct	bt_le_scan_recv_info
	LE advertisement and scan response packet information. More...
struct	bt_le_scan_cb
	Listener context for (LE) scanning. More...
struct	bt_le_oob_sc_data
	LE Secure Connections pairing Out of Band data. More...
struct	bt_le_oob
	LE Out of Band information. More...
struct	bt_bond_info
	Information about a bond with a remote device. More...
struct	bt_le_per_adv_sync_subevent_params
struct	bt_le_per_adv_response_params
struct	bt_br_discovery_result
	BR/EDR discovery result structure. More...
struct	bt_br_discovery_param
	BR/EDR discovery parameters. More...
struct	bt_br_discovery_cb
struct	bt_br_oob

Macros
#define	BT_ID_DEFAULT   0
	Convenience macro for specifying the default identity.
#define	BT_DATA_SERIALIZED_SIZE(data_len)
	Bluetooth data serialized size.
#define	BT_DATA(_type, _data, _data_len)
	Helper to declare elements of bt_data arrays.
#define	BT_DATA_BYTES(_type, _bytes...)
	Helper to declare elements of bt_data arrays.
#define	BT_LE_ADV_PARAM_INIT(_options, _int_min, _int_max, _peer)
	Initialize advertising parameters.
#define	BT_LE_ADV_PARAM(_options, _int_min, _int_max, _peer)
	Helper to declare advertising parameters inline.
#define	BT_LE_ADV_CONN_DIR(_peer)
#define	BT_LE_ADV_CONN
#define	BT_LE_ADV_CONN_FAST_1
	GAP recommended connectable advertising.
#define	BT_LE_ADV_CONN_FAST_2
	Connectable advertising with T_GAP(adv_fast_interval2)
#define	BT_LE_ADV_CONN_ONE_TIME   BT_LE_ADV_CONN_FAST_2 __DEPRECATED_MACRO
#define	BT_LE_ADV_CONN_NAME
#define	BT_LE_ADV_CONN_NAME_AD
#define	BT_LE_ADV_CONN_DIR_LOW_DUTY(_peer)
#define	BT_LE_ADV_NCONN
	Non-connectable advertising with private address.
#define	BT_LE_ADV_NCONN_NAME
#define	BT_LE_ADV_NCONN_IDENTITY
	Non-connectable advertising with BT_LE_ADV_OPT_USE_IDENTITY.
#define	BT_LE_EXT_ADV_CONN
	Connectable extended advertising.
#define	BT_LE_EXT_ADV_CONN_NAME
#define	BT_LE_EXT_ADV_SCAN
	Scannable extended advertising.
#define	BT_LE_EXT_ADV_SCAN_NAME
#define	BT_LE_EXT_ADV_NCONN
	Non-connectable extended advertising with private address.
#define	BT_LE_EXT_ADV_NCONN_NAME
#define	BT_LE_EXT_ADV_NCONN_IDENTITY
	Non-connectable extended advertising with BT_LE_ADV_OPT_USE_IDENTITY.
#define	BT_LE_EXT_ADV_CODED_NCONN
	Non-connectable extended advertising on coded PHY with private address.
#define	BT_LE_EXT_ADV_CODED_NCONN_NAME
#define	BT_LE_EXT_ADV_CODED_NCONN_IDENTITY
	Non-connectable extended advertising on coded PHY with BT_LE_ADV_OPT_USE_IDENTITY.
#define	BT_LE_EXT_ADV_START_PARAM_INIT(_timeout, _n_evts)
	Helper to initialize extended advertising start parameters inline.
#define	BT_LE_EXT_ADV_START_PARAM(_timeout, _n_evts)
	Helper to declare extended advertising start parameters inline.
#define	BT_LE_EXT_ADV_START_DEFAULT   BT_LE_EXT_ADV_START_PARAM(0, 0)
#define	BT_LE_PER_ADV_PARAM_INIT(_int_min, _int_max, _options)
	Helper to declare periodic advertising parameters inline.
#define	BT_LE_PER_ADV_PARAM(_int_min, _int_max, _options)
	Helper to declare periodic advertising parameters inline.
#define	BT_LE_PER_ADV_DEFAULT
#define	BT_LE_SCAN_OPT_FILTER_WHITELIST   __DEPRECATED_MACRO BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST
#define	BT_LE_SCAN_PARAM_INIT(_type, _options, _interval, _window)
	Initialize scan parameters.
#define	BT_LE_SCAN_PARAM(_type, _options, _interval, _window)
	Helper to declare scan parameters inline.
#define	BT_LE_SCAN_ACTIVE
	Helper macro to enable active scanning to discover new devices.
#define	BT_LE_SCAN_ACTIVE_CONTINUOUS
	Helper macro to enable active scanning to discover new devices with window == interval.
#define	BT_LE_SCAN_PASSIVE
	Helper macro to enable passive scanning to discover new devices.
#define	BT_LE_SCAN_PASSIVE_CONTINUOUS
	Helper macro to enable passive scanning to discover new devices with window==interval.
#define	BT_LE_SCAN_CODED_ACTIVE
	Helper macro to enable active scanning to discover new devices.
#define	BT_LE_SCAN_CODED_PASSIVE
	Helper macro to enable passive scanning to discover new devices.

Typedefs
typedef void(*	bt_ready_cb_t) (int err)
	Callback for notifying that Bluetooth has been enabled.
typedef void	bt_le_scan_cb_t(const bt_addr_le_t *addr, int8_t rssi, uint8_t adv_type, struct net_buf_simple *buf)
	Callback type for reporting LE scan results.

Enumerations
enum	{   BT_LE_ADV_OPT_NONE = 0 , BT_LE_ADV_OPT_CONNECTABLE = BIT(0) , _BT_LE_ADV_OPT_CONNECTABLE = BIT(0) , BT_LE_ADV_OPT_ONE_TIME = BIT(1) ,   _BT_LE_ADV_OPT_ONE_TIME = BIT(1) , BT_LE_ADV_OPT_CONN = BIT(0) | BIT(1) , BT_LE_ADV_OPT_USE_IDENTITY = BIT(2) , BT_LE_ADV_OPT_USE_NAME = BIT(3) ,   BT_LE_ADV_OPT_DIR_MODE_LOW_DUTY = BIT(4) , BT_LE_ADV_OPT_DIR_ADDR_RPA = BIT(5) , BT_LE_ADV_OPT_FILTER_SCAN_REQ = BIT(6) , BT_LE_ADV_OPT_FILTER_CONN = BIT(7) ,   BT_LE_ADV_OPT_NOTIFY_SCAN_REQ = BIT(8) , BT_LE_ADV_OPT_SCANNABLE = BIT(9) , BT_LE_ADV_OPT_EXT_ADV = BIT(10) , BT_LE_ADV_OPT_NO_2M = BIT(11) ,   BT_LE_ADV_OPT_CODED = BIT(12) , BT_LE_ADV_OPT_ANONYMOUS = BIT(13) , BT_LE_ADV_OPT_USE_TX_POWER = BIT(14) , BT_LE_ADV_OPT_DISABLE_CHAN_37 = BIT(15) ,   BT_LE_ADV_OPT_DISABLE_CHAN_38 = BIT(16) , BT_LE_ADV_OPT_DISABLE_CHAN_39 = BIT(17) , BT_LE_ADV_OPT_FORCE_NAME_IN_AD = BIT(18) , BT_LE_ADV_OPT_USE_NRPA = BIT(19) }
	Advertising options. More...
enum	{ BT_LE_PER_ADV_OPT_NONE = 0 , BT_LE_PER_ADV_OPT_USE_TX_POWER = BIT(1) , BT_LE_PER_ADV_OPT_INCLUDE_ADI = BIT(2) }
	Periodic Advertising options. More...
enum	{   BT_LE_PER_ADV_SYNC_OPT_NONE = 0 , BT_LE_PER_ADV_SYNC_OPT_USE_PER_ADV_LIST = BIT(0) , BT_LE_PER_ADV_SYNC_OPT_REPORTING_INITIALLY_DISABLED = BIT(1) , BT_LE_PER_ADV_SYNC_OPT_FILTER_DUPLICATE = BIT(2) ,   BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOA = BIT(3) , BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_1US = BIT(4) , BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_2US = BIT(5) , BT_LE_PER_ADV_SYNC_OPT_SYNC_ONLY_CONST_TONE_EXT = BIT(6) }
	Periodic advertising sync options. More...
enum	{   BT_LE_PER_ADV_SYNC_TRANSFER_OPT_NONE = 0 , BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOA = BIT(0) , BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_1US = BIT(1) , BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_2US = BIT(2) ,   BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_ONLY_CTE = BIT(3) , BT_LE_PER_ADV_SYNC_TRANSFER_OPT_REPORTING_INITIALLY_DISABLED = BIT(4) , BT_LE_PER_ADV_SYNC_TRANSFER_OPT_FILTER_DUPLICATES = BIT(5) }
	Periodic Advertising Sync Transfer options. More...
enum	{   BT_LE_SCAN_OPT_NONE = 0 , BT_LE_SCAN_OPT_FILTER_DUPLICATE = BIT(0) , BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST = BIT(1) , BT_LE_SCAN_OPT_CODED = BIT(2) ,   BT_LE_SCAN_OPT_NO_1M = BIT(3) }
enum	{ BT_LE_SCAN_TYPE_PASSIVE = 0x00 , BT_LE_SCAN_TYPE_ACTIVE = 0x01 }

Functions
int	bt_enable (bt_ready_cb_t cb)
	Enable Bluetooth.
int	bt_disable (void)
	Disable Bluetooth.
bool	bt_is_ready (void)
	Check if Bluetooth is ready.
int	bt_set_name (const char *name)
	Set Bluetooth Device Name.
const char *	bt_get_name (void)
	Get Bluetooth Device Name.
uint16_t	bt_get_appearance (void)
	Get local Bluetooth appearance.
int	bt_set_appearance (uint16_t new_appearance)
	Set local Bluetooth appearance.
void	bt_id_get (bt_addr_le_t *addrs, size_t *count)
	Get the currently configured identities.
int	bt_id_create (bt_addr_le_t *addr, uint8_t *irk)
	Create a new identity.
int	bt_id_reset (uint8_t id, bt_addr_le_t *addr, uint8_t *irk)
	Reset/reclaim an identity for reuse.
int	bt_id_delete (uint8_t id)
	Delete an identity.
size_t	bt_data_get_len (const struct bt_data data[], size_t data_count)
	Get the total size (in bytes) of a given set of bt_data structures.
size_t	bt_data_serialize (const struct bt_data *input, uint8_t *output)
	Serialize a bt_data struct into an advertising structure (a flat byte array).
int	bt_le_adv_start (const struct bt_le_adv_param *param, const struct bt_data *ad, size_t ad_len, const struct bt_data *sd, size_t sd_len)
	Start advertising.
int	bt_le_adv_update_data (const struct bt_data *ad, size_t ad_len, const struct bt_data *sd, size_t sd_len)
	Update advertising.
int	bt_le_adv_stop (void)
	Stop advertising.
int	bt_le_ext_adv_create (const struct bt_le_adv_param *param, const struct bt_le_ext_adv_cb *cb, struct bt_le_ext_adv **adv)
	Create advertising set.
int	bt_le_ext_adv_start (struct bt_le_ext_adv *adv, const struct bt_le_ext_adv_start_param *param)
	Start advertising with the given advertising set.
int	bt_le_ext_adv_stop (struct bt_le_ext_adv *adv)
	Stop advertising with the given advertising set.
int	bt_le_ext_adv_set_data (struct bt_le_ext_adv *adv, const struct bt_data *ad, size_t ad_len, const struct bt_data *sd, size_t sd_len)
	Set an advertising set's advertising or scan response data.
int	bt_le_ext_adv_update_param (struct bt_le_ext_adv *adv, const struct bt_le_adv_param *param)
	Update advertising parameters.
int	bt_le_ext_adv_delete (struct bt_le_ext_adv *adv)
	Delete advertising set.
uint8_t	bt_le_ext_adv_get_index (struct bt_le_ext_adv *adv)
	Get array index of an advertising set.
int	bt_le_ext_adv_get_info (const struct bt_le_ext_adv *adv, struct bt_le_ext_adv_info *info)
	Get advertising set info.
int	bt_le_per_adv_set_param (struct bt_le_ext_adv *adv, const struct bt_le_per_adv_param *param)
	Set or update the periodic advertising parameters.
int	bt_le_per_adv_set_data (const struct bt_le_ext_adv *adv, const struct bt_data *ad, size_t ad_len)
	Set or update the periodic advertising data.
int	bt_le_per_adv_set_subevent_data (const struct bt_le_ext_adv *adv, uint8_t num_subevents, const struct bt_le_per_adv_subevent_data_params *params)
	Set the periodic advertising with response subevent data.
int	bt_le_per_adv_start (struct bt_le_ext_adv *adv)
	Starts periodic advertising.
int	bt_le_per_adv_stop (struct bt_le_ext_adv *adv)
	Stops periodic advertising.
uint8_t	bt_le_per_adv_sync_get_index (struct bt_le_per_adv_sync *per_adv_sync)
	Get array index of an periodic advertising sync object.
struct bt_le_per_adv_sync *	bt_le_per_adv_sync_lookup_index (uint8_t index)
	Get a periodic advertising sync object from the array index.
int	bt_le_per_adv_sync_get_info (struct bt_le_per_adv_sync *per_adv_sync, struct bt_le_per_adv_sync_info *info)
	Get periodic adv sync information.
struct bt_le_per_adv_sync *	bt_le_per_adv_sync_lookup_addr (const bt_addr_le_t *adv_addr, uint8_t sid)
	Look up an existing periodic advertising sync object by advertiser address.
int	bt_le_per_adv_sync_create (const struct bt_le_per_adv_sync_param *param, struct bt_le_per_adv_sync **out_sync)
	Create a periodic advertising sync object.
int	bt_le_per_adv_sync_delete (struct bt_le_per_adv_sync *per_adv_sync)
	Delete periodic advertising sync.
int	bt_le_per_adv_sync_cb_register (struct bt_le_per_adv_sync_cb *cb)
	Register periodic advertising sync callbacks.
int	bt_le_per_adv_sync_recv_enable (struct bt_le_per_adv_sync *per_adv_sync)
	Enables receiving periodic advertising reports for a sync.
int	bt_le_per_adv_sync_recv_disable (struct bt_le_per_adv_sync *per_adv_sync)
	Disables receiving periodic advertising reports for a sync.
int	bt_le_per_adv_sync_transfer (const struct bt_le_per_adv_sync *per_adv_sync, const struct bt_conn *conn, uint16_t service_data)
	Transfer the periodic advertising sync information to a peer device.
int	bt_le_per_adv_set_info_transfer (const struct bt_le_ext_adv *adv, const struct bt_conn *conn, uint16_t service_data)
	Transfer the information about a periodic advertising set.
int	bt_le_per_adv_sync_transfer_subscribe (const struct bt_conn *conn, const struct bt_le_per_adv_sync_transfer_param *param)
	Subscribe to periodic advertising sync transfers (PASTs).
int	bt_le_per_adv_sync_transfer_unsubscribe (const struct bt_conn *conn)
	Unsubscribe from periodic advertising sync transfers (PASTs).
int	bt_le_per_adv_list_add (const bt_addr_le_t *addr, uint8_t sid)
	Add a device to the periodic advertising list.
int	bt_le_per_adv_list_remove (const bt_addr_le_t *addr, uint8_t sid)
	Remove a device from the periodic advertising list.
int	bt_le_per_adv_list_clear (void)
	Clear the periodic advertising list.
int	bt_le_scan_start (const struct bt_le_scan_param *param, bt_le_scan_cb_t cb)
	Start (LE) scanning.
int	bt_le_scan_stop (void)
	Stop (LE) scanning.
int	bt_le_scan_cb_register (struct bt_le_scan_cb *cb)
	Register scanner packet callbacks.
void	bt_le_scan_cb_unregister (struct bt_le_scan_cb *cb)
	Unregister scanner packet callbacks.
int	bt_le_filter_accept_list_add (const bt_addr_le_t *addr)
	Add device (LE) to filter accept list.
int	bt_le_filter_accept_list_remove (const bt_addr_le_t *addr)
	Remove device (LE) from filter accept list.
int	bt_le_filter_accept_list_clear (void)
	Clear filter accept list.
int	bt_le_set_chan_map (uint8_t chan_map[5])
	Set (LE) channel map.
int	bt_le_set_rpa_timeout (uint16_t new_rpa_timeout)
	Set the Resolvable Private Address timeout in runtime.
void	bt_data_parse (struct net_buf_simple *ad, bool(*func)(struct bt_data *data, void *user_data), void *user_data)
	Helper for parsing advertising (or EIR or OOB) data.
int	bt_le_oob_get_local (uint8_t id, struct bt_le_oob *oob)
	Get local LE Out of Band (OOB) information.
int	bt_le_ext_adv_oob_get_local (struct bt_le_ext_adv *adv, struct bt_le_oob *oob)
	Get local LE Out of Band (OOB) information.
int	bt_unpair (uint8_t id, const bt_addr_le_t *addr)
	Clear pairing information.
void	bt_foreach_bond (uint8_t id, void(*func)(const struct bt_bond_info *info, void *user_data), void *user_data)
	Iterate through all existing bonds.
int	bt_configure_data_path (uint8_t dir, uint8_t id, uint8_t vs_config_len, const uint8_t *vs_config)
	Configure vendor data path.
int	bt_le_per_adv_sync_subevent (struct bt_le_per_adv_sync *per_adv_sync, struct bt_le_per_adv_sync_subevent_params *params)
	Synchronize with a subset of subevents.
int	bt_le_per_adv_set_response_data (struct bt_le_per_adv_sync *per_adv_sync, const struct bt_le_per_adv_response_params *params, const struct net_buf_simple *data)
	Set the data for a response slot in a specific subevent of the PAwR.
int	bt_br_discovery_start (const struct bt_br_discovery_param *param, struct bt_br_discovery_result *results, size_t count)
	Start BR/EDR discovery.
int	bt_br_discovery_stop (void)
	Stop BR/EDR discovery.
void	bt_br_discovery_cb_register (struct bt_br_discovery_cb *cb)
	Register discovery packet callbacks.
void	bt_br_discovery_cb_unregister (struct bt_br_discovery_cb *cb)
	Unregister discovery packet callbacks.
int	bt_br_oob_get_local (struct bt_br_oob *oob)
	Get BR/EDR local Out Of Band information.
int	bt_br_set_discoverable (bool enable)
	Enable/disable set controller in discoverable state.
int	bt_br_set_connectable (bool enable)
	Enable/disable set controller in connectable state.

Detailed Description

Generic Access Profile (GAP) .

Generic Access Profile (GAP) .

Since

1.0

Version

1.0.0

Macro Definition Documentation

BT_DATA

#define BT_DATA	(		_type,
			_data,
			_data_len )

#include <zephyr/bluetooth/bluetooth.h>

Value:

        { \
                .type = (_type), \
                .data_len = (_data_len), \
                .data = (const uint8_t *)(_data), \
        }

Helper to declare elements of bt_data arrays.

This macro is mainly for creating an array of struct bt_data elements which is then passed to e.g. bt_le_adv_start().

Parameters

_type	Type of advertising data field
_data	Pointer to the data field payload
_data_len	Number of bytes behind the _data pointer

BT_DATA_BYTES

#define BT_DATA_BYTES	(		_type,
			_bytes... )

#include <zephyr/bluetooth/bluetooth.h>

Value:

        BT_DATA(_type, ((uint8_t []) { _bytes }), \
                sizeof((uint8_t []) { _bytes }))

Helper to declare elements of bt_data arrays.

This macro is mainly for creating an array of struct bt_data elements which is then passed to e.g. bt_le_adv_start().

Parameters

_type	Type of advertising data field
_bytes	Variable number of single-byte parameters

BT_DATA_SERIALIZED_SIZE

#define BT_DATA_SERIALIZED_SIZE

(

data_len

)

#include <zephyr/bluetooth/bluetooth.h>

Value:

((data_len) + 2)

Bluetooth data serialized size.

Get the size of a serialized bt_data given its data length.

Size of 'AD Structure'->'Length' field, equal to 1. Size of 'AD Structure'->'Data'->'AD Type' field, equal to 1. Size of 'AD Structure'->'Data'->'AD Data' field, equal to data_len.

See Core Specification Version 5.4 Vol. 3 Part C, 11, Figure 11.1.

BT_ID_DEFAULT

#define BT_ID_DEFAULT   0

#include <zephyr/bluetooth/bluetooth.h>

Convenience macro for specifying the default identity.

This helps make the code more readable, especially when only one identity is supported.

BT_LE_ADV_CONN

#define BT_LE_ADV_CONN

#include <zephyr/bluetooth/bluetooth.h>

Value:

        BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONNECTABLE, BT_GAP_ADV_FAST_INT_MIN_2,                      \
                        BT_GAP_ADV_FAST_INT_MAX_2, NULL)                                           \
        __DEPRECATED_MACRO

Deprecated

This is a convenience macro for BT_LE_ADV_OPT_CONNECTABLE, which is deprecated. Please use BT_LE_ADV_CONN_FAST_1 or BT_LE_ADV_CONN_FAST_2 instead.

BT_LE_ADV_CONN_DIR

#define BT_LE_ADV_CONN_DIR

(

_peer

)

#include <zephyr/bluetooth/bluetooth.h>

Value:

BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONN, 0, 0, _peer)

BT_LE_ADV_CONN_DIR_LOW_DUTY

#define BT_LE_ADV_CONN_DIR_LOW_DUTY

(

_peer

)

#include <zephyr/bluetooth/bluetooth.h>

Value:

        BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONN | BT_LE_ADV_OPT_DIR_MODE_LOW_DUTY,                      \
                        BT_GAP_ADV_FAST_INT_MIN_2, BT_GAP_ADV_FAST_INT_MAX_2, _peer)

BT_LE_ADV_CONN_FAST_1

#define BT_LE_ADV_CONN_FAST_1

#include <zephyr/bluetooth/bluetooth.h>

Value:

        BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONN, BT_GAP_ADV_FAST_INT_MIN_1, BT_GAP_ADV_FAST_INT_MAX_1,  \
                        NULL)

GAP recommended connectable advertising.

This is the recommended default for when a person is likely to be waiting the device to connect or be discovered.

Use a longer interval to conserve battery at the cost of responsiveness. Consider entering a lower power state with longer intervals after a timeout.

GAP recommends advertisers use this "when user-initiated". The application developer decides what this means. It can by any time the user interacts with the device, a press on a dedicated Bluetooth wakeup button, or anything in-between.

This is the recommended setting for limited discoverable mode.

See Bluetooth Core Specification:

• 3.C.A "Timers and Constants", T_GAP(adv_fast_interval1)
• 3.C.9.3.11 "Connection Establishment Timing parameters"

BT_LE_ADV_CONN_FAST_2

#define BT_LE_ADV_CONN_FAST_2

#include <zephyr/bluetooth/bluetooth.h>

Value:

        BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONN, BT_GAP_ADV_FAST_INT_MIN_2, BT_GAP_ADV_FAST_INT_MAX_2,  \
                        NULL)

Connectable advertising with T_GAP(adv_fast_interval2)

The advertising interval corresponds to what was offered as BT_LE_ADV_CONN in Zephyr 3.6 and earlier, but unlike BT_LE_ADV_CONN, the host does not automatically resume the advertiser after it results in a connection.

See Bluetooth Core Specification:

• 3.C.A "Timers and Constants", T_GAP(adv_fast_interval1)
• 3.C.9.3.11 "Connection Establishment Timing parameters"

BT_LE_ADV_CONN_NAME

#define BT_LE_ADV_CONN_NAME

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                            BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONNECTABLE | \
                                            BT_LE_ADV_OPT_USE_NAME, \
                                            BT_GAP_ADV_FAST_INT_MIN_2, \
                                            BT_GAP_ADV_FAST_INT_MAX_2, NULL) \
                                            __DEPRECATED_MACRO

Deprecated

This macro will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686

BT_LE_ADV_CONN_NAME_AD

#define BT_LE_ADV_CONN_NAME_AD

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                            BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONNECTABLE | \
                                            BT_LE_ADV_OPT_USE_NAME | \
                                            BT_LE_ADV_OPT_FORCE_NAME_IN_AD, \
                                            BT_GAP_ADV_FAST_INT_MIN_2, \
                                            BT_GAP_ADV_FAST_INT_MAX_2, NULL) \
                                            __DEPRECATED_MACRO

Deprecated

This macro will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686

BT_LE_ADV_CONN_ONE_TIME

#define BT_LE_ADV_CONN_ONE_TIME   BT_LE_ADV_CONN_FAST_2 __DEPRECATED_MACRO

#include <zephyr/bluetooth/bluetooth.h>

BT_LE_ADV_NCONN

#define BT_LE_ADV_NCONN

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                        BT_LE_ADV_PARAM(0, BT_GAP_ADV_FAST_INT_MIN_2, \
                                        BT_GAP_ADV_FAST_INT_MAX_2, NULL)

Non-connectable advertising with private address.

BT_LE_ADV_NCONN_IDENTITY

#define BT_LE_ADV_NCONN_IDENTITY

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                 BT_LE_ADV_PARAM(BT_LE_ADV_OPT_USE_IDENTITY, \
                                                 BT_GAP_ADV_FAST_INT_MIN_2, \
                                                 BT_GAP_ADV_FAST_INT_MAX_2, \
                                                 NULL)

Non-connectable advertising with BT_LE_ADV_OPT_USE_IDENTITY.

BT_LE_ADV_NCONN_NAME

#define BT_LE_ADV_NCONN_NAME

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                             BT_LE_ADV_PARAM(BT_LE_ADV_OPT_USE_NAME, \
                                             BT_GAP_ADV_FAST_INT_MIN_2, \
                                             BT_GAP_ADV_FAST_INT_MAX_2, NULL) \
                                             __DEPRECATED_MACRO

Deprecated

This macro will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686

Non-connectable advertising with BT_LE_ADV_OPT_USE_NAME

BT_LE_ADV_PARAM

#define BT_LE_ADV_PARAM	(		_options,
			_int_min,
			_int_max,
			_peer )

#include <zephyr/bluetooth/bluetooth.h>

Value:

        ((const struct bt_le_adv_param[]) { \
                BT_LE_ADV_PARAM_INIT(_options, _int_min, _int_max, _peer) \
         })

Helper to declare advertising parameters inline.

Parameters

_options	Advertising Options
_int_min	Minimum advertising interval
_int_max	Maximum advertising interval
_peer	Peer address, set to NULL for undirected advertising or address of peer for directed advertising.

BT_LE_ADV_PARAM_INIT

#define BT_LE_ADV_PARAM_INIT	(		_options,
			_int_min,
			_int_max,
			_peer )

#include <zephyr/bluetooth/bluetooth.h>

Value:

{ \
        .id = BT_ID_DEFAULT, \
        .sid = 0, \
        .secondary_max_skip = 0, \
        .options = (_options), \
        .interval_min = (_int_min), \
        .interval_max = (_int_max), \
        .peer = (_peer), \
}

Initialize advertising parameters.

Parameters

_options	Advertising Options
_int_min	Minimum advertising interval
_int_max	Maximum advertising interval
_peer	Peer address, set to NULL for undirected advertising or address of peer for directed advertising.

BT_LE_EXT_ADV_CODED_NCONN

#define BT_LE_EXT_ADV_CODED_NCONN

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                  BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | \
                                                  BT_LE_ADV_OPT_CODED, \
                                                  BT_GAP_ADV_FAST_INT_MIN_2, \
                                                  BT_GAP_ADV_FAST_INT_MAX_2, \
                                                  NULL)

Non-connectable extended advertising on coded PHY with private address.

BT_LE_EXT_ADV_CODED_NCONN_IDENTITY

#define BT_LE_EXT_ADV_CODED_NCONN_IDENTITY

#include <zephyr/bluetooth/bluetooth.h>

Value:

                BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | BT_LE_ADV_OPT_CODED | \
                                BT_LE_ADV_OPT_USE_IDENTITY, \
                                BT_GAP_ADV_FAST_INT_MIN_2, \
                                BT_GAP_ADV_FAST_INT_MAX_2, NULL)

Non-connectable extended advertising on coded PHY with BT_LE_ADV_OPT_USE_IDENTITY.

BT_LE_EXT_ADV_CODED_NCONN_NAME

#define BT_LE_EXT_ADV_CODED_NCONN_NAME

#include <zephyr/bluetooth/bluetooth.h>

Value:

                BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | BT_LE_ADV_OPT_CODED | \
                                BT_LE_ADV_OPT_USE_NAME, \
                                BT_GAP_ADV_FAST_INT_MIN_2, \
                                BT_GAP_ADV_FAST_INT_MAX_2, NULL) \
                                __DEPRECATED_MACRO

Deprecated

This macro will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686

Non-connectable extended advertising on coded PHY with BT_LE_ADV_OPT_USE_NAME

BT_LE_EXT_ADV_CONN

#define BT_LE_EXT_ADV_CONN

#include <zephyr/bluetooth/bluetooth.h>

Value:

        BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | BT_LE_ADV_OPT_CONN, BT_GAP_ADV_FAST_INT_MIN_2,     \
                        BT_GAP_ADV_FAST_INT_MAX_2, NULL)

Connectable extended advertising.

BT_LE_EXT_ADV_CONN_NAME

#define BT_LE_EXT_ADV_CONN_NAME

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | \
                                                BT_LE_ADV_OPT_CONNECTABLE | \
                                                BT_LE_ADV_OPT_USE_NAME, \
                                                BT_GAP_ADV_FAST_INT_MIN_2, \
                                                BT_GAP_ADV_FAST_INT_MAX_2, \
                                                NULL) \
                                                __DEPRECATED_MACRO

Deprecated

This macro will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686

Connectable extended advertising with BT_LE_ADV_OPT_USE_NAME

BT_LE_EXT_ADV_NCONN

#define BT_LE_EXT_ADV_NCONN

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                            BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV, \
                                            BT_GAP_ADV_FAST_INT_MIN_2, \
                                            BT_GAP_ADV_FAST_INT_MAX_2, NULL)

Non-connectable extended advertising with private address.

BT_LE_EXT_ADV_NCONN_IDENTITY

#define BT_LE_EXT_ADV_NCONN_IDENTITY

#include <zephyr/bluetooth/bluetooth.h>

Value:

                BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | \
                                BT_LE_ADV_OPT_USE_IDENTITY, \
                                BT_GAP_ADV_FAST_INT_MIN_2, \
                                BT_GAP_ADV_FAST_INT_MAX_2, NULL)

Non-connectable extended advertising with BT_LE_ADV_OPT_USE_IDENTITY.

BT_LE_EXT_ADV_NCONN_NAME

#define BT_LE_EXT_ADV_NCONN_NAME

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                 BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | \
                                                 BT_LE_ADV_OPT_USE_NAME, \
                                                 BT_GAP_ADV_FAST_INT_MIN_2, \
                                                 BT_GAP_ADV_FAST_INT_MAX_2, \
                                                 NULL) \
                                                 __DEPRECATED_MACRO

Deprecated

This macro will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686

Non-connectable extended advertising with BT_LE_ADV_OPT_USE_NAME

BT_LE_EXT_ADV_SCAN

#define BT_LE_EXT_ADV_SCAN

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                           BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | \
                                           BT_LE_ADV_OPT_SCANNABLE, \
                                           BT_GAP_ADV_FAST_INT_MIN_2, \
                                           BT_GAP_ADV_FAST_INT_MAX_2, \
                                           NULL)

Scannable extended advertising.

BT_LE_EXT_ADV_SCAN_NAME

#define BT_LE_EXT_ADV_SCAN_NAME

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | \
                                                BT_LE_ADV_OPT_SCANNABLE | \
                                                BT_LE_ADV_OPT_USE_NAME, \
                                                BT_GAP_ADV_FAST_INT_MIN_2, \
                                                BT_GAP_ADV_FAST_INT_MAX_2, \
                                                NULL) \
                                                __DEPRECATED_MACRO

Deprecated

This macro will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686

Scannable extended advertising with BT_LE_ADV_OPT_USE_NAME

BT_LE_EXT_ADV_START_DEFAULT

#define BT_LE_EXT_ADV_START_DEFAULT   BT_LE_EXT_ADV_START_PARAM(0, 0)

#include <zephyr/bluetooth/bluetooth.h>

BT_LE_EXT_ADV_START_PARAM

#define BT_LE_EXT_ADV_START_PARAM	(		_timeout,
			_n_evts )

#include <zephyr/bluetooth/bluetooth.h>

Value:

        ((const struct bt_le_ext_adv_start_param[]) { \
                BT_LE_EXT_ADV_START_PARAM_INIT((_timeout), (_n_evts)) \
        })

Helper to declare extended advertising start parameters inline.

Parameters

_timeout	Advertiser timeout
_n_evts	Number of advertising events

BT_LE_EXT_ADV_START_PARAM_INIT

#define BT_LE_EXT_ADV_START_PARAM_INIT	(		_timeout,
			_n_evts )

#include <zephyr/bluetooth/bluetooth.h>

Value:

{ \
        .timeout = (_timeout), \
        .num_events = (_n_evts), \
}

Helper to initialize extended advertising start parameters inline.

Parameters

_timeout	Advertiser timeout
_n_evts	Number of advertising events

BT_LE_PER_ADV_DEFAULT

#define BT_LE_PER_ADV_DEFAULT

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                  BT_LE_PER_ADV_PARAM(BT_GAP_PER_ADV_SLOW_INT_MIN, \
                                                  BT_GAP_PER_ADV_SLOW_INT_MAX, \
                                                  BT_LE_PER_ADV_OPT_NONE)

BT_LE_PER_ADV_PARAM

#define BT_LE_PER_ADV_PARAM	(		_int_min,
			_int_max,
			_options )

#include <zephyr/bluetooth/bluetooth.h>

Value:

        ((struct bt_le_per_adv_param[]) { \
                BT_LE_PER_ADV_PARAM_INIT(_int_min, _int_max, _options) \
        })

Helper to declare periodic advertising parameters inline.

Parameters

_int_min	Minimum periodic advertising interval
_int_max	Maximum periodic advertising interval
_options	Periodic advertising properties bitfield.

BT_LE_PER_ADV_PARAM_INIT

#define BT_LE_PER_ADV_PARAM_INIT	(		_int_min,
			_int_max,
			_options )

#include <zephyr/bluetooth/bluetooth.h>

Value:

{ \
        .interval_min = (_int_min), \
        .interval_max = (_int_max), \
        .options = (_options), \
}

Helper to declare periodic advertising parameters inline.

Parameters

_int_min	Minimum periodic advertising interval
_int_max	Maximum periodic advertising interval
_options	Periodic advertising properties bitfield.

BT_LE_SCAN_ACTIVE

#define BT_LE_SCAN_ACTIVE

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                           BT_LE_SCAN_PARAM(BT_LE_SCAN_TYPE_ACTIVE, \
                                           BT_LE_SCAN_OPT_FILTER_DUPLICATE, \
                                           BT_GAP_SCAN_FAST_INTERVAL, \
                                           BT_GAP_SCAN_FAST_WINDOW)

Helper macro to enable active scanning to discover new devices.

BT_LE_SCAN_ACTIVE_CONTINUOUS

#define BT_LE_SCAN_ACTIVE_CONTINUOUS

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                      BT_LE_SCAN_PARAM(BT_LE_SCAN_TYPE_ACTIVE, \
                                                      BT_LE_SCAN_OPT_FILTER_DUPLICATE, \
                                                      BT_GAP_SCAN_FAST_INTERVAL_MIN, \
                                                      BT_GAP_SCAN_FAST_WINDOW)

Helper macro to enable active scanning to discover new devices with window == interval.

Continuous scanning should be used to maximize the chances of receiving advertising packets.

BT_LE_SCAN_CODED_ACTIVE

#define BT_LE_SCAN_CODED_ACTIVE

#include <zephyr/bluetooth/bluetooth.h>

Value:

                BT_LE_SCAN_PARAM(BT_LE_SCAN_TYPE_ACTIVE, \
                                 BT_LE_SCAN_OPT_CODED | \
                                 BT_LE_SCAN_OPT_FILTER_DUPLICATE, \
                                 BT_GAP_SCAN_FAST_INTERVAL, \
                                 BT_GAP_SCAN_FAST_WINDOW)

Helper macro to enable active scanning to discover new devices.

Include scanning on Coded PHY in addition to 1M PHY.

BT_LE_SCAN_CODED_PASSIVE

#define BT_LE_SCAN_CODED_PASSIVE

#include <zephyr/bluetooth/bluetooth.h>

Value:

                BT_LE_SCAN_PARAM(BT_LE_SCAN_TYPE_PASSIVE, \
                                 BT_LE_SCAN_OPT_CODED | \
                                 BT_LE_SCAN_OPT_FILTER_DUPLICATE, \
                                 BT_GAP_SCAN_FAST_INTERVAL, \
                                 BT_GAP_SCAN_FAST_WINDOW)

Helper macro to enable passive scanning to discover new devices.

Include scanning on Coded PHY in addition to 1M PHY.

This macro should be used if information required for device identification (e.g., UUID) are known to be placed in Advertising Data.

BT_LE_SCAN_OPT_FILTER_WHITELIST

#define BT_LE_SCAN_OPT_FILTER_WHITELIST   __DEPRECATED_MACRO BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST

#include <zephyr/bluetooth/bluetooth.h>

BT_LE_SCAN_PARAM

#define BT_LE_SCAN_PARAM	(		_type,
			_options,
			_interval,
			_window )

#include <zephyr/bluetooth/bluetooth.h>

Value:

        ((struct bt_le_scan_param[]) { \
                BT_LE_SCAN_PARAM_INIT(_type, _options, _interval, _window) \
         })

Helper to declare scan parameters inline.

Parameters

_type	Scan Type, BT_LE_SCAN_TYPE_ACTIVE or BT_LE_SCAN_TYPE_PASSIVE.
_options	Scan options
_interval	Scan Interval (N * 0.625 ms)
_window	Scan Window (N * 0.625 ms)

BT_LE_SCAN_PARAM_INIT

#define BT_LE_SCAN_PARAM_INIT	(		_type,
			_options,
			_interval,
			_window )

#include <zephyr/bluetooth/bluetooth.h>

Value:

{ \
        .type = (_type), \
        .options = (_options), \
        .interval = (_interval), \
        .window = (_window), \
        .timeout = 0, \
        .interval_coded = 0, \
        .window_coded = 0, \
}

Initialize scan parameters.

Parameters

_type	Scan Type, BT_LE_SCAN_TYPE_ACTIVE or BT_LE_SCAN_TYPE_PASSIVE.
_options	Scan options
_interval	Scan Interval (N * 0.625 ms)
_window	Scan Window (N * 0.625 ms)

BT_LE_SCAN_PASSIVE

#define BT_LE_SCAN_PASSIVE

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                            BT_LE_SCAN_PARAM(BT_LE_SCAN_TYPE_PASSIVE, \
                                            BT_LE_SCAN_OPT_FILTER_DUPLICATE, \
                                            BT_GAP_SCAN_FAST_INTERVAL, \
                                            BT_GAP_SCAN_FAST_WINDOW)

Helper macro to enable passive scanning to discover new devices.

This macro should be used if information required for device identification (e.g., UUID) are known to be placed in Advertising Data.

BT_LE_SCAN_PASSIVE_CONTINUOUS

#define BT_LE_SCAN_PASSIVE_CONTINUOUS

#include <zephyr/bluetooth/bluetooth.h>

Value:

                                                       BT_LE_SCAN_PARAM(BT_LE_SCAN_TYPE_PASSIVE, \
                                                       BT_LE_SCAN_OPT_FILTER_DUPLICATE, \
                                                       BT_GAP_SCAN_FAST_INTERVAL_MIN, \
                                                       BT_GAP_SCAN_FAST_WINDOW)

Helper macro to enable passive scanning to discover new devices with window==interval.

This macro should be used if information required for device identification (e.g., UUID) are known to be placed in Advertising Data.

Typedef Documentation

bt_le_scan_cb_t

typedef void bt_le_scan_cb_t(const bt_addr_le_t *addr, int8_t rssi, uint8_t adv_type, struct net_buf_simple *buf)

#include <zephyr/bluetooth/bluetooth.h>

Callback type for reporting LE scan results.

A function of this type is given to the bt_le_scan_start() function and will be called for any discovered LE device.

Parameters

addr	Advertiser LE address and type.
rssi	Strength of advertiser signal.
adv_type	Type of advertising response from advertiser. Uses the BT_GAP_ADV_TYPE_* values.
buf	Buffer containing advertiser data.

bt_ready_cb_t

typedef void(* bt_ready_cb_t) (int err)

#include <zephyr/bluetooth/bluetooth.h>

Callback for notifying that Bluetooth has been enabled.

Parameters

err	zero on success or (negative) error code otherwise.

Enumeration Type Documentation

anonymous enum

anonymous enum

#include <zephyr/bluetooth/bluetooth.h>

Advertising options.

Enumerator
BT_LE_ADV_OPT_NONE	Convenience value when no options are specified.
BT_LE_ADV_OPT_CONNECTABLE	Advertise as connectable. Deprecated Use BT_LE_ADV_OPT_CONN instead. Advertise as connectable. If not connectable then the type of advertising is determined by providing scan response data. The advertiser address is determined by the type of advertising and/or enabling privacy CONFIG_BT_PRIVACY . Starting connectable advertising preallocates a connection object. If this fails, the API returns -ENOMEM. When an advertiser set results in a connection creation, the controller automatically disables that advertising set. If the advertising set was started with bt_le_adv_start without BT_LE_ADV_OPT_ONE_TIME, the host will attempt to resume the advertiser under some conditions.
BT_LE_ADV_OPT_ONE_TIME	Advertise one time. Deprecated Use BT_LE_ADV_OPT_CONN instead. Don't try to resume connectable advertising after a connection. This option is only meaningful when used together with BT_LE_ADV_OPT_CONNECTABLE. If set the advertising will be stopped when bt_le_adv_stop() is called or when an incoming (peripheral) connection happens. If this option is not set the stack will take care of keeping advertising enabled even as connections occur. If Advertising directed or the advertiser was started with bt_le_ext_adv_start then this behavior is the default behavior and this flag has no effect.
BT_LE_ADV_OPT_CONN	Connectable advertising. Starting connectable advertising preallocates a connection object. If this fails, the API returns -ENOMEM. The advertising set stops immediately after it creates a connection. This happens automatically in the controller. Note To continue advertising after a connection is created, the application should listen for the bt_conn_cb::connected event and start the advertising set again. Note that the advertiser cannot be started when all connection objects are in use. In that case, defer starting the advertiser until bt_conn_cb::recycled. To continue after a disconnection, listen for bt_conn_cb::recycled.
BT_LE_ADV_OPT_USE_IDENTITY	Advertise using identity address. Advertise using the identity address as the advertiser address. Warning This will compromise the privacy of the device, so care must be taken when using this option. Note The address used for advertising will not be the same as returned by bt_le_oob_get_local, instead bt_id_get should be used to get the LE address.
BT_LE_ADV_OPT_USE_NAME	Advertise using GAP device name. Deprecated This option will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686 Include the GAP device name automatically when advertising. By default the GAP device name is put at the end of the scan response data. When advertising using BT_LE_ADV_OPT_EXT_ADV and not BT_LE_ADV_OPT_SCANNABLE then it will be put at the end of the advertising data. If the GAP device name does not fit into advertising data it will be converted to a shortened name if possible. BT_LE_ADV_OPT_FORCE_NAME_IN_AD can be used to force the device name to appear in the advertising data of an advert with scan response data. The application can set the device name itself by including the following in the advertising data. BT_DATA(BT_DATA_NAME_COMPLETE, name, sizeof(name) - 1)
BT_LE_ADV_OPT_DIR_MODE_LOW_DUTY	Low duty cycle directed advertising. Use low duty directed advertising mode, otherwise high duty mode will be used.
BT_LE_ADV_OPT_DIR_ADDR_RPA	Directed advertising to privacy-enabled peer. Enable use of Resolvable Private Address (RPA) as the target address in directed advertisements. This is required if the remote device is privacy-enabled and supports address resolution of the target address in directed advertisement. It is the responsibility of the application to check that the remote device supports address resolution of directed advertisements by reading its Central Address Resolution characteristic.
BT_LE_ADV_OPT_FILTER_SCAN_REQ	Use filter accept list to filter devices that can request scan response data.
BT_LE_ADV_OPT_FILTER_CONN	Use filter accept list to filter devices that can connect.
BT_LE_ADV_OPT_NOTIFY_SCAN_REQ	Notify the application when a scan response data has been sent to an active scanner.
BT_LE_ADV_OPT_SCANNABLE	Support scan response data. When used together with BT_LE_ADV_OPT_EXT_ADV then this option cannot be used together with the BT_LE_ADV_OPT_CONN option. When used together with BT_LE_ADV_OPT_EXT_ADV then scan response data must be set.
BT_LE_ADV_OPT_EXT_ADV	Advertise with extended advertising. This options enables extended advertising in the advertising set. In extended advertising the advertising set will send a small header packet on the three primary advertising channels. This small header points to the advertising data packet that will be sent on one of the 37 secondary advertising channels. The advertiser will send primary advertising on LE 1M PHY, and secondary advertising on LE 2M PHY. Connections will be established on LE 2M PHY. Without this option the advertiser will send advertising data on the three primary advertising channels. Note Enabling this option requires extended advertising support in the peer devices scanning for advertisement packets. This cannot be used with bt_le_adv_start().
BT_LE_ADV_OPT_NO_2M	Disable use of LE 2M PHY on the secondary advertising channel. Disabling the use of LE 2M PHY could be necessary if scanners don't support the LE 2M PHY. The advertiser will send primary advertising on LE 1M PHY, and secondary advertising on LE 1M PHY. Connections will be established on LE 1M PHY. Note Cannot be set if BT_LE_ADV_OPT_CODED is set. Requires BT_LE_ADV_OPT_EXT_ADV.
BT_LE_ADV_OPT_CODED	Advertise on the LE Coded PHY (Long Range). The advertiser will send both primary and secondary advertising on the LE Coded PHY. This gives the advertiser increased range with the trade-off of lower data rate and higher power consumption. Connections will be established on LE Coded PHY. Note Requires BT_LE_ADV_OPT_EXT_ADV
BT_LE_ADV_OPT_ANONYMOUS	Advertise without a device address (identity or RPA). Note Requires BT_LE_ADV_OPT_EXT_ADV
BT_LE_ADV_OPT_USE_TX_POWER	Advertise with transmit power. Note Requires BT_LE_ADV_OPT_EXT_ADV
BT_LE_ADV_OPT_DISABLE_CHAN_37	Disable advertising on channel index 37.
BT_LE_ADV_OPT_DISABLE_CHAN_38	Disable advertising on channel index 38.
BT_LE_ADV_OPT_DISABLE_CHAN_39	Disable advertising on channel index 39.
BT_LE_ADV_OPT_FORCE_NAME_IN_AD	Put GAP device name into advert data. Deprecated This option will be removed in the near future, see https://github.com/zephyrproject-rtos/zephyr/issues/71686 Will place the GAP device name into the advertising data rather than the scan response data. Note Requires BT_LE_ADV_OPT_USE_NAME
BT_LE_ADV_OPT_USE_NRPA	Advertise using a Non-Resolvable Private Address. A new NRPA is set when updating the advertising parameters. This is an advanced feature; most users will want to enable CONFIG_BT_EXT_ADV instead. Note Not implemented when CONFIG_BT_PRIVACY . Mutually exclusive with BT_LE_ADV_OPT_USE_IDENTITY.

anonymous enum

anonymous enum

#include <zephyr/bluetooth/bluetooth.h>

Periodic Advertising options.

Enumerator
BT_LE_PER_ADV_OPT_NONE	Convenience value when no options are specified.
BT_LE_PER_ADV_OPT_USE_TX_POWER	Advertise with transmit power. Note Requires BT_LE_ADV_OPT_EXT_ADV
BT_LE_PER_ADV_OPT_INCLUDE_ADI	Advertise with included AdvDataInfo (ADI). Note Requires BT_LE_ADV_OPT_EXT_ADV

anonymous enum

anonymous enum

#include <zephyr/bluetooth/bluetooth.h>

Periodic advertising sync options.

Enumerator
BT_LE_PER_ADV_SYNC_OPT_NONE	Convenience value when no options are specified.
BT_LE_PER_ADV_SYNC_OPT_USE_PER_ADV_LIST	Use the periodic advertising list to sync with advertiser. When this option is set, the address and SID of the parameters are ignored.
BT_LE_PER_ADV_SYNC_OPT_REPORTING_INITIALLY_DISABLED	Disables periodic advertising reports. No advertisement reports will be handled until enabled.
BT_LE_PER_ADV_SYNC_OPT_FILTER_DUPLICATE	Filter duplicate Periodic Advertising reports.
BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOA	Sync with Angle of Arrival (AoA) constant tone extension.
BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_1US	Sync with Angle of Departure (AoD) 1 us constant tone extension.
BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_2US	Sync with Angle of Departure (AoD) 2 us constant tone extension.
BT_LE_PER_ADV_SYNC_OPT_SYNC_ONLY_CONST_TONE_EXT	Do not sync to packets without a constant tone extension.

anonymous enum

anonymous enum

#include <zephyr/bluetooth/bluetooth.h>

Periodic Advertising Sync Transfer options.

Enumerator
BT_LE_PER_ADV_SYNC_TRANSFER_OPT_NONE	Convenience value when no options are specified.
BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOA	No Angle of Arrival (AoA) Do not sync with Angle of Arrival (AoA) constant tone extension
BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_1US	No Angle of Departure (AoD) 1 us. Do not sync with Angle of Departure (AoD) 1 us constant tone extension
BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_2US	No Angle of Departure (AoD) 2. Do not sync with Angle of Departure (AoD) 2 us constant tone extension
BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_ONLY_CTE	Only sync to packets with constant tone extension.
BT_LE_PER_ADV_SYNC_TRANSFER_OPT_REPORTING_INITIALLY_DISABLED	Sync to received PAST packets but don't generate sync reports. This option must not be set at the same time as BT_LE_PER_ADV_SYNC_TRANSFER_OPT_FILTER_DUPLICATES.
BT_LE_PER_ADV_SYNC_TRANSFER_OPT_FILTER_DUPLICATES	Sync to received PAST packets and generate sync reports with duplicate filtering. This option must not be set at the same time as BT_LE_PER_ADV_SYNC_TRANSFER_OPT_REPORTING_INITIALLY_DISABLED.

anonymous enum

anonymous enum

#include <zephyr/bluetooth/bluetooth.h>

Enumerator
BT_LE_SCAN_OPT_NONE	Convenience value when no options are specified.
BT_LE_SCAN_OPT_FILTER_DUPLICATE	Filter duplicates.
BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST	Filter using filter accept list.
BT_LE_SCAN_OPT_CODED	Enable scan on coded PHY (Long Range).
BT_LE_SCAN_OPT_NO_1M	Disable scan on 1M phy. Note Requires BT_LE_SCAN_OPT_CODED.

anonymous enum

anonymous enum

#include <zephyr/bluetooth/bluetooth.h>

Enumerator
BT_LE_SCAN_TYPE_PASSIVE	Scan without requesting additional information from advertisers.
BT_LE_SCAN_TYPE_ACTIVE	Scan and request additional information from advertisers. Using this scan type will automatically send scan requests to all devices. Scan responses are received in the same manner and using the same callbacks as advertising reports.

Function Documentation

bt_br_discovery_cb_register()

void bt_br_discovery_cb_register

(

struct bt_br_discovery_cb *

cb

)

#include <zephyr/bluetooth/classic/classic.h>

Register discovery packet callbacks.

Adds the callback structure to the list of callback structures that monitors inquiry activity.

This callback will be called for all inquiry activity, regardless of what API was used to start the discovery.

Parameters

cb	Callback struct. Must point to memory that remains valid.

bt_br_discovery_cb_unregister()

void bt_br_discovery_cb_unregister

(

struct bt_br_discovery_cb *

cb

)

#include <zephyr/bluetooth/classic/classic.h>

Unregister discovery packet callbacks.

Remove the callback structure from the list of discovery callbacks.

Parameters

cb	Callback struct. Must point to memory that remains valid.

bt_br_discovery_start()

int bt_br_discovery_start	(	const struct bt_br_discovery_param *	param,
		struct bt_br_discovery_result *	results,
		size_t	count )

#include <zephyr/bluetooth/classic/classic.h>

Start BR/EDR discovery.

Start BR/EDR discovery (inquiry) and provide results through the specified callback. The discovery results will be notified through callbacks registered by bt_br_discovery_cb_register. If more inquiry results were received during session than fits in provided result storage, only ones with highest RSSI will be reported.

Parameters

param	Discovery parameters.
results	Storage for discovery results.
count	Number of results in storage. Valid range: 1-255.

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error

bt_br_discovery_stop()

int bt_br_discovery_stop

(

void

)

#include <zephyr/bluetooth/classic/classic.h>

Stop BR/EDR discovery.

Stops ongoing BR/EDR discovery. If discovery was stopped by this call results won't be reported

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_br_oob_get_local()

int bt_br_oob_get_local

(

struct bt_br_oob *

oob

)

#include <zephyr/bluetooth/classic/classic.h>

Get BR/EDR local Out Of Band information.

This function allows to get local controller information that are useful for Out Of Band pairing or connection creation process.

Parameters

oob	Out Of Band information

bt_br_set_connectable()

int bt_br_set_connectable

(

bool

enable

)

#include <zephyr/bluetooth/classic/classic.h>

Enable/disable set controller in connectable state.

Allows make local controller to be connectable. It means the controller start listen to devices requests on PAGE SCAN channel. If disabled also resets discoverability if was set.

Parameters

enable

Value allowing/disallowing controller to be connectable.

Returns

Negative if fail set to requested state or requested state has been already set. Zero if done successfully.

bt_br_set_discoverable()

int bt_br_set_discoverable

(

bool

enable

)

#include <zephyr/bluetooth/classic/classic.h>

Enable/disable set controller in discoverable state.

Allows make local controller to listen on INQUIRY SCAN channel and responds to devices making general inquiry. To enable this state it's mandatory to first be in connectable state.

Parameters

enable

Value allowing/disallowing controller to become discoverable.

Returns

Negative if fail set to requested state or requested state has been already set. Zero if done successfully.

bt_configure_data_path()

int bt_configure_data_path	(	uint8_t	dir,
		uint8_t	id,
		uint8_t	vs_config_len,
		const uint8_t *	vs_config )

#include <zephyr/bluetooth/bluetooth.h>

Configure vendor data path.

Request the Controller to configure the data transport path in a given direction between the Controller and the Host.

Parameters

dir	Direction to be configured, BT_HCI_DATAPATH_DIR_HOST_TO_CTLR or BT_HCI_DATAPATH_DIR_CTLR_TO_HOST
id	Vendor specific logical transport channel ID, range [BT_HCI_DATAPATH_ID_VS..BT_HCI_DATAPATH_ID_VS_END]
vs_config_len	Length of additional vendor specific configuration data
vs_config	Pointer to additional vendor specific configuration data

Returns

0 in case of success or negative value in case of error.

bt_data_get_len()

size_t bt_data_get_len	(	const struct bt_data	data[],
		size_t	data_count )

#include <zephyr/bluetooth/bluetooth.h>

Get the total size (in bytes) of a given set of bt_data structures.

Parameters

[in]	data	Array of bt_data structures.
[in]	data_count	Number of bt_data structures in data.

Returns

Size of the concatenated data, built from the bt_data structure set.

bt_data_parse()

void bt_data_parse	(	struct net_buf_simple *	ad,
		bool(*	func )(struct bt_data *data, void *user_data),
		void *	user_data )

#include <zephyr/bluetooth/bluetooth.h>

Helper for parsing advertising (or EIR or OOB) data.

A helper for parsing the basic data types used for Extended Inquiry Response (EIR), Advertising Data (AD), and OOB data blocks. The most common scenario is to call this helper on the advertising data received in the callback that was given to bt_le_scan_start().

Warning

This helper function will consume ad when parsing. The user should make a copy if the original data is to be used afterwards

Parameters

ad	Advertising data as given to the bt_le_scan_cb_t callback.
func	Callback function which will be called for each element that's found in the data. The callback should return true to continue parsing, or false to stop parsing.
user_data	User data to be passed to the callback.

bt_data_serialize()

size_t bt_data_serialize	(	const struct bt_data *	input,
		uint8_t *	output )

#include <zephyr/bluetooth/bluetooth.h>

Serialize a bt_data struct into an advertising structure (a flat byte array).

The data are formatted according to the Bluetooth Core Specification v. 5.4, vol. 3, part C, 11.

Parameters

[in]	input	Single bt_data structure to read from.
[out]	output	Buffer large enough to store the advertising structure in input. The size of it must be at least the size of the input->data_len + 2 (for the type and the length).

Returns

Number of bytes written in output.

bt_disable()

int bt_disable

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Disable Bluetooth.

Disable Bluetooth. Can't be called before bt_enable has completed.

This API will clear all configured identities and keys that are not persistently stored with

CONFIG_BT_SETTINGS 

. These can be restored with settings_load() before reenabling the stack.

This API does not clear previously registered callbacks like bt_le_scan_cb_register, bt_conn_cb_register AND bt_br_discovery_cb_register. That is, the application shall not re-register them when the Bluetooth subsystem is re-enabled later.

Close and release HCI resources. Result is architecture dependent.

Returns

Zero on success or (negative) error code otherwise.

bt_enable()

int bt_enable

(

bt_ready_cb_t

cb

)

#include <zephyr/bluetooth/bluetooth.h>

Enable Bluetooth.

Enable Bluetooth. Must be the called before any calls that require communication with the local Bluetooth hardware.

When

CONFIG_BT_SETTINGS 

is enabled, the application must load the Bluetooth settings after this API call successfully completes before Bluetooth APIs can be used. Loading the settings before calling this function is insufficient. Bluetooth settings can be loaded with settings_load() or settings_load_subtree() with argument "bt". The latter selectively loads only Bluetooth settings and is recommended if settings_load() has been called earlier.

Parameters

cb	Callback to notify completion or NULL to perform the enabling synchronously. The callback is called from the system workqueue.

Returns

Zero on success or (negative) error code otherwise.

bt_foreach_bond()

void bt_foreach_bond	(	uint8_t	id,
		void(*	func )(const struct bt_bond_info *info, void *user_data),
		void *	user_data )

#include <zephyr/bluetooth/bluetooth.h>

Iterate through all existing bonds.

Parameters

id	Local identity (mostly just BT_ID_DEFAULT).
func	Function to call for each bond.
user_data	Data to pass to the callback function.

bt_get_appearance()

uint16_t bt_get_appearance

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Get local Bluetooth appearance.

Bluetooth Appearance is a description of the external appearance of a device in terms of an Appearance Value.

See also

https://specificationrefs.bluetooth.com/assigned-values/Appearance%20Values.pdf

Returns

Appearance Value of local Bluetooth host.

bt_get_name()

const char * bt_get_name

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Get Bluetooth Device Name.

Get Bluetooth GAP Device Name.

Returns

Bluetooth Device Name

bt_id_create()

int bt_id_create	(	bt_addr_le_t *	addr,
		uint8_t *	irk )

#include <zephyr/bluetooth/bluetooth.h>

Create a new identity.

Create a new identity using the given address and IRK. This function can be called before calling bt_enable(). However, the new identity will only be stored persistently in flash when this API is used after bt_enable(). The reason is that the persistent settings are loaded after bt_enable() and would therefore cause potential conflicts with the stack blindly overwriting what's stored in flash. The identity will also not be written to flash in case a pre-defined address is provided, since in such a situation the app clearly has some place it got the address from and will be able to repeat the procedure on every power cycle, i.e. it would be redundant to also store the information in flash.

Generating random static address or random IRK is not supported when calling this function before bt_enable().

If the application wants to have the stack randomly generate identities and store them in flash for later recovery, the way to do it would be to first initialize the stack (using bt_enable), then call settings_load(), and after that check with bt_id_get() how many identities were recovered. If an insufficient amount of identities were recovered the app may then call bt_id_create() to create new ones.

If supported by the HCI driver (indicated by setting

CONFIG_BT_HCI_SET_PUBLIC_ADDR 

), the first call to this function can be used to set the controller's public identity address. This call must happen before calling bt_enable(). Subsequent calls always add/generate random static addresses.

Parameters

addr	Address to use for the new identity. If NULL or initialized to BT_ADDR_LE_ANY the stack will generate a new random static address for the identity and copy it to the given parameter upon return from this function (in case the parameter was non-NULL).
irk	Identity Resolving Key (16 bytes) to be used with this identity. If set to all zeroes or NULL, the stack will generate a random IRK for the identity and copy it back to the parameter upon return from this function (in case the parameter was non-NULL). If privacy CONFIG_BT_PRIVACY is not enabled this parameter must be NULL.

Returns

Identity identifier (>= 0) in case of success, or a negative error code on failure.

bt_id_delete()

int bt_id_delete

(

uint8_t

id

)

#include <zephyr/bluetooth/bluetooth.h>

Delete an identity.

When given a valid identity this function will disconnect any connections created using it, remove any pairing keys or other data associated with it, and then flag is as deleted, so that it can not be used for any operations. To take back into use the slot the identity was occupying the bt_id_reset() API needs to be used.

Note

the default identity (BT_ID_DEFAULT) cannot be deleted, i.e. this API will return an error if asked to do that.

Parameters

id	Existing identity identifier.

Returns

0 in case of success, or a negative error code on failure.

bt_id_get()

void bt_id_get	(	bt_addr_le_t *	addrs,
		size_t *	count )

#include <zephyr/bluetooth/bluetooth.h>

Get the currently configured identities.

Returns an array of the currently configured identity addresses. To make sure all available identities can be retrieved, the number of elements in the addrs array should be CONFIG_BT_ID_MAX. The identity identifier that some APIs expect (such as advertising parameters) is simply the index of the identity in the addrs array.

If addrs is passed as NULL, then returned count contains the count of all available identities that can be retrieved with a subsequent call to this function with non-NULL addrs parameter.

Note

Deleted identities may show up as BT_ADDR_LE_ANY in the returned array.

Parameters

addrs	Array where to store the configured identities.
count	Should be initialized to the array size. Once the function returns it will contain the number of returned identities.

bt_id_reset()

int bt_id_reset	(	uint8_t	id,
		bt_addr_le_t *	addr,
		uint8_t *	irk )

#include <zephyr/bluetooth/bluetooth.h>

Reset/reclaim an identity for reuse.

The semantics of the addr and irk parameters of this function are the same as with bt_id_create(). The difference is the first id parameter that needs to be an existing identity (if it doesn't exist this function will return an error). When given an existing identity this function will disconnect any connections created using it, remove any pairing keys or other data associated with it, and then create a new identity in the same slot, based on the addr and irk parameters.

Note

the default identity (BT_ID_DEFAULT) cannot be reset, i.e. this API will return an error if asked to do that.

Parameters

id	Existing identity identifier.
addr	Address to use for the new identity. If NULL or initialized to BT_ADDR_LE_ANY the stack will generate a new static random address for the identity and copy it to the given parameter upon return from this function (in case the parameter was non-NULL).
irk	Identity Resolving Key (16 bytes) to be used with this identity. If set to all zeroes or NULL, the stack will generate a random IRK for the identity and copy it back to the parameter upon return from this function (in case the parameter was non-NULL). If privacy CONFIG_BT_PRIVACY is not enabled this parameter must be NULL.

Returns

Identity identifier (>= 0) in case of success, or a negative error code on failure.

bt_is_ready()

bool bt_is_ready

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Check if Bluetooth is ready.

Returns

true when Bluetooth is ready, false otherwise

bt_le_adv_start()

int bt_le_adv_start	(	const struct bt_le_adv_param *	param,
		const struct bt_data *	ad,
		size_t	ad_len,
		const struct bt_data *	sd,
		size_t	sd_len )

#include <zephyr/bluetooth/bluetooth.h>

Start advertising.

Set advertisement data, scan response data, advertisement parameters and start advertising.

When the advertisement parameter peer address has been set the advertising will be directed to the peer. In this case advertisement data and scan response data parameters are ignored. If the mode is high duty cycle the timeout will be BT_GAP_ADV_HIGH_DUTY_CYCLE_MAX_TIMEOUT.

This function cannot be used with BT_LE_ADV_OPT_EXT_ADV in the param.options. For extended advertising, the bt_le_ext_adv_* functions must be used.

Parameters

param	Advertising parameters.
ad	Data to be used in advertisement packets.
ad_len	Number of elements in ad
sd	Data to be used in scan response packets.
sd_len	Number of elements in sd

Returns

Zero on success or (negative) error code otherwise.

-ENOMEM No free connection objects available for connectable advertiser.

-ECONNREFUSED When connectable advertising is requested and there is already maximum number of connections established in the controller. This error code is only guaranteed when using Zephyr controller, for other controllers code returned in this case may be -EIO.

bt_le_adv_stop()

int bt_le_adv_stop

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Stop advertising.

Stops ongoing advertising.

Returns

Zero on success or (negative) error code otherwise.

bt_le_adv_update_data()

int bt_le_adv_update_data	(	const struct bt_data *	ad,
		size_t	ad_len,
		const struct bt_data *	sd,
		size_t	sd_len )

#include <zephyr/bluetooth/bluetooth.h>

Update advertising.

Update advertisement and scan response data.

Parameters

ad	Data to be used in advertisement packets.
ad_len	Number of elements in ad
sd	Data to be used in scan response packets.
sd_len	Number of elements in sd

Returns

Zero on success or (negative) error code otherwise.

bt_le_ext_adv_create()

int bt_le_ext_adv_create	(	const struct bt_le_adv_param *	param,
		const struct bt_le_ext_adv_cb *	cb,
		struct bt_le_ext_adv **	adv )

#include <zephyr/bluetooth/bluetooth.h>

Create advertising set.

Create a new advertising set and set advertising parameters. Advertising parameters can be updated with bt_le_ext_adv_update_param.

Parameters

[in]	param	Advertising parameters.
[in]	cb	Callback struct to notify about advertiser activity. Can be NULL. Must point to valid memory during the lifetime of the advertising set.
[out]	adv	Valid advertising set object on success.

Returns

Zero on success or (negative) error code otherwise.

bt_le_ext_adv_delete()

int bt_le_ext_adv_delete

(

struct bt_le_ext_adv *

adv

)

#include <zephyr/bluetooth/bluetooth.h>

Delete advertising set.

Delete advertising set. This will free up the advertising set and make it possible to create a new advertising set.

Returns

Zero on success or (negative) error code otherwise.

bt_le_ext_adv_get_index()

uint8_t bt_le_ext_adv_get_index

(

struct bt_le_ext_adv *

adv

)

#include <zephyr/bluetooth/bluetooth.h>

Get array index of an advertising set.

This function is used to map bt_adv to index of an array of advertising sets. The array has CONFIG_BT_EXT_ADV_MAX_ADV_SET elements.

Parameters

adv	Advertising set.

Returns

Index of the advertising set object. The range of the returned value is 0..CONFIG_BT_EXT_ADV_MAX_ADV_SET-1

bt_le_ext_adv_get_info()

int bt_le_ext_adv_get_info	(	const struct bt_le_ext_adv *	adv,
		struct bt_le_ext_adv_info *	info )

#include <zephyr/bluetooth/bluetooth.h>

Get advertising set info.

Parameters

adv	Advertising set object
info	Advertising set info object

Returns

Zero on success or (negative) error code on failure.

bt_le_ext_adv_oob_get_local()

int bt_le_ext_adv_oob_get_local	(	struct bt_le_ext_adv *	adv,
		struct bt_le_oob *	oob )

#include <zephyr/bluetooth/bluetooth.h>

Get local LE Out of Band (OOB) information.

This function allows to get local information that are useful for Out of Band pairing or connection creation.

If privacy

CONFIG_BT_PRIVACY 

is enabled this will result in generating new Resolvable Private Address (RPA) that is valid for

CONFIG_BT_RPA_TIMEOUT 

seconds. This address will be used by the advertising set.

Note

When generating OOB information for multiple advertising set all OOB information needs to be generated at the same time.

If privacy is enabled the RPA cannot be refreshed in the following cases:

• Creating a connection in progress, wait for the connected callback.

Parameters

[in]	adv	The advertising set object
[out]	oob	LE OOB information

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_le_ext_adv_set_data()

int bt_le_ext_adv_set_data	(	struct bt_le_ext_adv *	adv,
		const struct bt_data *	ad,
		size_t	ad_len,
		const struct bt_data *	sd,
		size_t	sd_len )

#include <zephyr/bluetooth/bluetooth.h>

Set an advertising set's advertising or scan response data.

Set advertisement data or scan response data. If the advertising set is currently advertising then the advertising data will be updated in subsequent advertising events.

When both BT_LE_ADV_OPT_EXT_ADV and BT_LE_ADV_OPT_SCANNABLE are enabled then advertising data is ignored. When BT_LE_ADV_OPT_SCANNABLE is not enabled then scan response data is ignored.

If the advertising set has been configured to send advertising data on the primary advertising channels then the maximum data length is BT_GAP_ADV_MAX_ADV_DATA_LEN bytes. If the advertising set has been configured for extended advertising, then the maximum data length is defined by the controller with the maximum possible of BT_GAP_ADV_MAX_EXT_ADV_DATA_LEN bytes.

Note

Not all scanners support extended data length advertising data.

When updating the advertising data while advertising the advertising data and scan response data length must be smaller or equal to what can be fit in a single advertising packet. Otherwise the advertiser must be stopped.

Parameters

adv	Advertising set object.
ad	Data to be used in advertisement packets.
ad_len	Number of elements in ad
sd	Data to be used in scan response packets.
sd_len	Number of elements in sd

Returns

Zero on success or (negative) error code otherwise.

bt_le_ext_adv_start()

int bt_le_ext_adv_start	(	struct bt_le_ext_adv *	adv,
		const struct bt_le_ext_adv_start_param *	param )

#include <zephyr/bluetooth/bluetooth.h>

Start advertising with the given advertising set.

If the advertiser is limited by either the timeout or number of advertising events the application will be notified by the advertiser sent callback once the limit is reached. If the advertiser is limited by both the timeout and the number of advertising events then the limit that is reached first will stop the advertiser.

Parameters

adv	Advertising set object.
param	Advertise start parameters.

bt_le_ext_adv_stop()

int bt_le_ext_adv_stop

(

struct bt_le_ext_adv *

adv

)

#include <zephyr/bluetooth/bluetooth.h>

Stop advertising with the given advertising set.

Stop advertising with a specific advertising set. When using this function the advertising sent callback will not be called.

Parameters

adv	Advertising set object.

Returns

Zero on success or (negative) error code otherwise.

bt_le_ext_adv_update_param()

int bt_le_ext_adv_update_param	(	struct bt_le_ext_adv *	adv,
		const struct bt_le_adv_param *	param )

#include <zephyr/bluetooth/bluetooth.h>

Update advertising parameters.

Update the advertising parameters. The function will return an error if the advertiser set is currently advertising. Stop the advertising set before calling this function.

Note

When changing the option BT_LE_ADV_OPT_USE_NAME then bt_le_ext_adv_set_data needs to be called in order to update the advertising data and scan response data.

Parameters

adv	Advertising set object.
param	Advertising parameters.

Returns

Zero on success or (negative) error code otherwise.

bt_le_filter_accept_list_add()

int bt_le_filter_accept_list_add

(

const bt_addr_le_t *

addr

)

#include <zephyr/bluetooth/bluetooth.h>

Add device (LE) to filter accept list.

Add peer device LE address to the filter accept list.

Note

The filter accept list cannot be modified when an LE role is using the filter accept list, i.e advertiser or scanner using a filter accept list or automatic connecting to devices using filter accept list.

Parameters

addr	Bluetooth LE identity address.

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_le_filter_accept_list_clear()

int bt_le_filter_accept_list_clear

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Clear filter accept list.

Clear all devices from the filter accept list.

Note

The filter accept list cannot be modified when an LE role is using the filter accept list, i.e advertiser or scanner using a filter accept list or automatic connecting to devices using filter accept list.

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_le_filter_accept_list_remove()

int bt_le_filter_accept_list_remove

(

const bt_addr_le_t *

addr

)

#include <zephyr/bluetooth/bluetooth.h>

Remove device (LE) from filter accept list.

Remove peer device LE address from the filter accept list.

Note

The filter accept list cannot be modified when an LE role is using the filter accept list, i.e advertiser or scanner using a filter accept list or automatic connecting to devices using filter accept list.

Parameters

addr	Bluetooth LE identity address.

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_le_oob_get_local()

int bt_le_oob_get_local	(	uint8_t	id,
		struct bt_le_oob *	oob )

#include <zephyr/bluetooth/bluetooth.h>

Get local LE Out of Band (OOB) information.

This function allows to get local information that are useful for Out of Band pairing or connection creation.

If privacy

CONFIG_BT_PRIVACY 

is enabled this will result in generating new Resolvable Private Address (RPA) that is valid for

CONFIG_BT_RPA_TIMEOUT 

seconds. This address will be used for advertising started by bt_le_adv_start, active scanning and connection creation.

Note

If privacy is enabled the RPA cannot be refreshed in the following cases:

• Creating a connection in progress, wait for the connected callback. In addition when extended advertising

  CONFIG_BT_EXT_ADV 

  is not enabled or not supported by the controller:
• Advertiser is enabled using a Random Static Identity Address for a different local identity.
• The local identity conflicts with the local identity used by other roles.

Parameters

[in]	id	Local identity, in most cases BT_ID_DEFAULT.
[out]	oob	LE OOB information

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_le_per_adv_list_add()

int bt_le_per_adv_list_add	(	const bt_addr_le_t *	addr,
		uint8_t	sid )

#include <zephyr/bluetooth/bluetooth.h>

Add a device to the periodic advertising list.

Add peer device LE address to the periodic advertising list. This will make it possibly to automatically create a periodic advertising sync to this device.

Parameters

addr	Bluetooth LE identity address.
sid	The advertising set ID. This value is obtained from the bt_le_scan_recv_info in the scan callback.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_list_clear()

int bt_le_per_adv_list_clear

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Clear the periodic advertising list.

Clears the entire periodic advertising list.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_list_remove()

int bt_le_per_adv_list_remove	(	const bt_addr_le_t *	addr,
		uint8_t	sid )

#include <zephyr/bluetooth/bluetooth.h>

Remove a device from the periodic advertising list.

Removes peer device LE address from the periodic advertising list.

Parameters

addr	Bluetooth LE identity address.
sid	The advertising set ID. This value is obtained from the bt_le_scan_recv_info in the scan callback.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_set_data()

int bt_le_per_adv_set_data	(	const struct bt_le_ext_adv *	adv,
		const struct bt_data *	ad,
		size_t	ad_len )

#include <zephyr/bluetooth/bluetooth.h>

Set or update the periodic advertising data.

The periodic advertisement data can only be set or updated on an extended advertisement set which is neither scannable, connectable nor anonymous.

Parameters

adv	Advertising set object.
ad	Advertising data.
ad_len	Advertising data length.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_set_info_transfer()

int bt_le_per_adv_set_info_transfer	(	const struct bt_le_ext_adv *	adv,
		const struct bt_conn *	conn,
		uint16_t	service_data )

#include <zephyr/bluetooth/bluetooth.h>

Transfer the information about a periodic advertising set.

This will allow another device to quickly synchronize to periodic advertising set from this device.

Parameters

adv	The periodic advertising set to transfer info of.
conn	The peer device that will receive the information.
service_data	Application service data provided to the remote host.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_set_param()

int bt_le_per_adv_set_param	(	struct bt_le_ext_adv *	adv,
		const struct bt_le_per_adv_param *	param )

#include <zephyr/bluetooth/bluetooth.h>

Set or update the periodic advertising parameters.

The periodic advertising parameters can only be set or updated on an extended advertisement set which is neither scannable, connectable nor anonymous.

Parameters

adv	Advertising set object.
param	Advertising parameters.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_set_response_data()

int bt_le_per_adv_set_response_data	(	struct bt_le_per_adv_sync *	per_adv_sync,
		const struct bt_le_per_adv_response_params *	params,
		const struct net_buf_simple *	data )

#include <zephyr/bluetooth/bluetooth.h>

Set the data for a response slot in a specific subevent of the PAwR.

This function is called by the application to set the response data. The data for a response slot shall be transmitted only once.

Parameters

per_adv_sync	The periodic advertising sync object.
params	Parameters.
data	The response data to send.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_set_subevent_data()

int bt_le_per_adv_set_subevent_data	(	const struct bt_le_ext_adv *	adv,
		uint8_t	num_subevents,
		const struct bt_le_per_adv_subevent_data_params *	params )

#include <zephyr/bluetooth/bluetooth.h>

Set the periodic advertising with response subevent data.

Set the data for one or more subevents of a Periodic Advertising with Responses Advertiser in reply data request.

Precondition

There are num_subevents elements in params.

The controller has requested data for the subevents in params.

Parameters

adv	The extended advertiser the PAwR train belongs to.
num_subevents	The number of subevents to set data for.
params	Subevent parameters.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_start()

int bt_le_per_adv_start

(

struct bt_le_ext_adv *

adv

)

#include <zephyr/bluetooth/bluetooth.h>

Starts periodic advertising.

Enabling the periodic advertising can be done independently of extended advertising, but both periodic advertising and extended advertising shall be enabled before any periodic advertising data is sent. The periodic advertising and extended advertising can be enabled in any order.

Once periodic advertising has been enabled, it will continue advertising until bt_le_per_adv_stop() has been called, or if the advertising set is deleted by bt_le_ext_adv_delete(). Calling bt_le_ext_adv_stop() will not stop the periodic advertising.

Parameters

adv	Advertising set object.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_stop()

int bt_le_per_adv_stop

(

struct bt_le_ext_adv *

adv

)

#include <zephyr/bluetooth/bluetooth.h>

Stops periodic advertising.

Disabling the periodic advertising can be done independently of extended advertising. Disabling periodic advertising will not disable extended advertising.

Parameters

adv	Advertising set object.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_sync_cb_register()

int bt_le_per_adv_sync_cb_register

(

struct bt_le_per_adv_sync_cb *

cb

)

#include <zephyr/bluetooth/bluetooth.h>

Register periodic advertising sync callbacks.

Adds the callback structure to the list of callback structures for periodic advertising syncs.

This callback will be called for all periodic advertising sync activity, such as synced, terminated and when data is received.

Parameters

cb	Callback struct. Must point to memory that remains valid.

Return values

0	Success.
-EEXIST	if cb was already registered.

bt_le_per_adv_sync_create()

int bt_le_per_adv_sync_create	(	const struct bt_le_per_adv_sync_param *	param,
		struct bt_le_per_adv_sync **	out_sync )

#include <zephyr/bluetooth/bluetooth.h>

Create a periodic advertising sync object.

Create a periodic advertising sync object that can try to synchronize to periodic advertising reports from an advertiser. Scan shall either be disabled or extended scan shall be enabled.

This function does not timeout, and will continue to look for an advertiser until it either finds it or bt_le_per_adv_sync_delete() is called. It is thus suggested to implement a timeout when using this, if it is expected to find the advertiser within a reasonable timeframe.

Parameters

[in]	param	Periodic advertising sync parameters.
[out]	out_sync	Periodic advertising sync object on.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_sync_delete()

int bt_le_per_adv_sync_delete

(

struct bt_le_per_adv_sync *

per_adv_sync

)

#include <zephyr/bluetooth/bluetooth.h>

Delete periodic advertising sync.

Delete the periodic advertising sync object. Can be called regardless of the state of the sync. If the syncing is currently syncing, the syncing is cancelled. If the sync has been established, it is terminated. The periodic advertising sync object will be invalidated afterwards.

If the state of the sync object is syncing, then a new periodic advertising sync object may not be created until the controller has finished canceling this object.

Parameters

per_adv_sync

The periodic advertising sync object.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_sync_get_index()

uint8_t bt_le_per_adv_sync_get_index

(

struct bt_le_per_adv_sync *

per_adv_sync

)

#include <zephyr/bluetooth/bluetooth.h>

Get array index of an periodic advertising sync object.

This function is get the index of an array of periodic advertising sync objects. The array has CONFIG_BT_PER_ADV_SYNC_MAX elements.

Parameters

per_adv_sync

The periodic advertising sync object.

Returns

Index of the periodic advertising sync object. The range of the returned value is 0..CONFIG_BT_PER_ADV_SYNC_MAX-1

bt_le_per_adv_sync_get_info()

int bt_le_per_adv_sync_get_info	(	struct bt_le_per_adv_sync *	per_adv_sync,
		struct bt_le_per_adv_sync_info *	info )

#include <zephyr/bluetooth/bluetooth.h>

Get periodic adv sync information.

Parameters

per_adv_sync	Periodic advertising sync object.
info	Periodic advertising sync info object

Returns

Zero on success or (negative) error code on failure.

bt_le_per_adv_sync_lookup_addr()

struct bt_le_per_adv_sync * bt_le_per_adv_sync_lookup_addr	(	const bt_addr_le_t *	adv_addr,
		uint8_t	sid )

#include <zephyr/bluetooth/bluetooth.h>

Look up an existing periodic advertising sync object by advertiser address.

Parameters

adv_addr	Advertiser address.
sid	The advertising set ID.

Returns

Periodic advertising sync object or NULL if not found.

bt_le_per_adv_sync_lookup_index()

struct bt_le_per_adv_sync * bt_le_per_adv_sync_lookup_index

(

uint8_t

index

)

#include <zephyr/bluetooth/bluetooth.h>

Get a periodic advertising sync object from the array index.

This function is to get the periodic advertising sync object from the array index. The array has CONFIG_BT_PER_ADV_SYNC_MAX elements.

Parameters

index

The index of the periodic advertising sync object. The range of the index value is 0..CONFIG_BT_PER_ADV_SYNC_MAX-1

Returns

The periodic advertising sync object of the array index or NULL if invalid index.

bt_le_per_adv_sync_recv_disable()

int bt_le_per_adv_sync_recv_disable

(

struct bt_le_per_adv_sync *

per_adv_sync

)

#include <zephyr/bluetooth/bluetooth.h>

Disables receiving periodic advertising reports for a sync.

If the sync report receiving is already disabled, -EALREADY is returned.

Parameters

per_adv_sync

The periodic advertising sync object.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_sync_recv_enable()

int bt_le_per_adv_sync_recv_enable

(

struct bt_le_per_adv_sync *

per_adv_sync

)

#include <zephyr/bluetooth/bluetooth.h>

Enables receiving periodic advertising reports for a sync.

If the sync is already receiving the reports, -EALREADY is returned.

Parameters

per_adv_sync

The periodic advertising sync object.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_sync_subevent()

int bt_le_per_adv_sync_subevent	(	struct bt_le_per_adv_sync *	per_adv_sync,
		struct bt_le_per_adv_sync_subevent_params *	params )

#include <zephyr/bluetooth/bluetooth.h>

Synchronize with a subset of subevents.

Until this command is issued, the subevent(s) the controller is synchronized to is unspecified.

Parameters

per_adv_sync	The periodic advertising sync object.
params	Parameters.

Returns

0 in case of success or negative value in case of error.

bt_le_per_adv_sync_transfer()

int bt_le_per_adv_sync_transfer	(	const struct bt_le_per_adv_sync *	per_adv_sync,
		const struct bt_conn *	conn,
		uint16_t	service_data )

#include <zephyr/bluetooth/bluetooth.h>

Transfer the periodic advertising sync information to a peer device.

This will allow another device to quickly synchronize to the same periodic advertising train that this device is currently synced to.

Parameters

per_adv_sync	The periodic advertising sync to transfer.
conn	The peer device that will receive the sync information.
service_data	Application service data provided to the remote host.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_sync_transfer_subscribe()

int bt_le_per_adv_sync_transfer_subscribe	(	const struct bt_conn *	conn,
		const struct bt_le_per_adv_sync_transfer_param *	param )

#include <zephyr/bluetooth/bluetooth.h>

Subscribe to periodic advertising sync transfers (PASTs).

Sets the parameters and allow other devices to transfer periodic advertising syncs.

Parameters

conn	The connection to set the parameters for. If NULL default parameters for all connections will be set. Parameters set for specific connection will always have precedence.
param	The periodic advertising sync transfer parameters.

Returns

Zero on success or (negative) error code otherwise.

bt_le_per_adv_sync_transfer_unsubscribe()

int bt_le_per_adv_sync_transfer_unsubscribe

(

const struct bt_conn *

conn

)

#include <zephyr/bluetooth/bluetooth.h>

Unsubscribe from periodic advertising sync transfers (PASTs).

Remove the parameters that allow other devices to transfer periodic advertising syncs.

Parameters

conn	The connection to remove the parameters for. If NULL default parameters for all connections will be removed. Unsubscribing for a specific device, will still allow other devices to transfer periodic advertising syncs.

Returns

Zero on success or (negative) error code otherwise.

bt_le_scan_cb_register()

int bt_le_scan_cb_register

(

struct bt_le_scan_cb *

cb

)

#include <zephyr/bluetooth/bluetooth.h>

Register scanner packet callbacks.

Adds the callback structure to the list of callback structures that monitors scanner activity.

This callback will be called for all scanner activity, regardless of what API was used to start the scanner.

Parameters

cb	Callback struct. Must point to memory that remains valid.

Return values

0	Success.
-EEXIST	if cb was already registered.

bt_le_scan_cb_unregister()

void bt_le_scan_cb_unregister

(

struct bt_le_scan_cb *

cb

)

#include <zephyr/bluetooth/bluetooth.h>

Unregister scanner packet callbacks.

Remove the callback structure from the list of scanner callbacks.

Parameters

cb	Callback struct. Must point to memory that remains valid.

bt_le_scan_start()

int bt_le_scan_start	(	const struct bt_le_scan_param *	param,
		bt_le_scan_cb_t	cb )

#include <zephyr/bluetooth/bluetooth.h>

Start (LE) scanning.

Start LE scanning with given parameters and provide results through the specified callback.

Note

The LE scanner by default does not use the Identity Address of the local device when

CONFIG_BT_PRIVACY 

is disabled. This is to prevent the active scanner from disclosing the identity information when requesting additional information from advertisers. In order to enable directed advertiser reports then

CONFIG_BT_SCAN_WITH_IDENTITY 

must be enabled.

Setting the param.timeout parameter is not supported when

CONFIG_BT_PRIVACY 

is enabled, when the param.type is BT_LE_SCAN_TYPE_ACTIVE. Supplying a non-zero timeout will result in an -EINVAL error code.

Parameters

param	Scan parameters.
cb	Callback to notify scan results. May be NULL if callback registration through bt_le_scan_cb_register is preferred.

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

Return values

-EBUSY

if the scanner is already being started in a different thread.

bt_le_scan_stop()

int bt_le_scan_stop

(

void

)

#include <zephyr/bluetooth/bluetooth.h>

Stop (LE) scanning.

Stops ongoing LE scanning.

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_le_set_chan_map()

int bt_le_set_chan_map

(

uint8_t

chan_map[5]

)

#include <zephyr/bluetooth/bluetooth.h>

Set (LE) channel map.

Parameters

chan_map

Channel map.

Returns

Zero on success or error code otherwise, positive in case of protocol error or negative (POSIX) in case of stack internal error.

bt_le_set_rpa_timeout()

int bt_le_set_rpa_timeout

(

uint16_t

new_rpa_timeout

)

#include <zephyr/bluetooth/bluetooth.h>

Set the Resolvable Private Address timeout in runtime.

The new RPA timeout value will be used for the next RPA rotation and all subsequent rotations until another override is scheduled with this API.

Initially, the if

CONFIG_BT_RPA_TIMEOUT 

is used as the RPA timeout.

This symbol is linkable if

CONFIG_BT_RPA_TIMEOUT_DYNAMIC 

is enabled.

Parameters

new_rpa_timeout

Resolvable Private Address timeout in seconds

Return values

0	Success.
-EINVAL	RPA timeout value is invalid. Valid range is 1s - 3600s.

bt_set_appearance()

int bt_set_appearance

(

uint16_t

new_appearance

)

#include <zephyr/bluetooth/bluetooth.h>

Set local Bluetooth appearance.

Automatically preserves the new appearance across reboots if

CONFIG_BT_SETTINGS 

is enabled.

This symbol is linkable if

CONFIG_BT_DEVICE_APPEARANCE_DYNAMIC 

is enabled.

Parameters

new_appearance

Appearance Value

Return values

0	Success.
other	Persistent storage failed. Appearance was not updated.

bt_set_name()

int bt_set_name

(

const char *

name

)

#include <zephyr/bluetooth/bluetooth.h>

Set Bluetooth Device Name.

Set Bluetooth GAP Device Name.

When advertising with device name in the advertising data the name should be updated by calling bt_le_adv_update_data or bt_le_ext_adv_set_data.

Note

Requires

CONFIG_BT_DEVICE_NAME_DYNAMIC 

.

See also

CONFIG_BT_DEVICE_NAME_MAX 

.

Parameters

name

New name

Returns

Zero on success or (negative) error code otherwise.

bt_unpair()

int bt_unpair	(	uint8_t	id,
		const bt_addr_le_t *	addr )

#include <zephyr/bluetooth/bluetooth.h>

Clear pairing information.

Parameters

id	Local identity (mostly just BT_ID_DEFAULT).
addr	Remote address, NULL or BT_ADDR_LE_ANY to clear all remote devices.

Returns

0 on success or negative error value on failure.