Disk Driver Interface . More...

Data Structures
struct	disk_info
	Disk info. More...

struct	disk_operations
	Disk operations. More...

Macros
#define	DISK_IOCTL_GET_SECTOR_COUNT 1
	Possible Cmd Codes for disk_ioctl()

#define	DISK_IOCTL_GET_SECTOR_SIZE 2
	Get the size of a disk SECTOR in bytes.

#define	DISK_IOCTL_RESERVED 3
	reserved.

#define	DISK_IOCTL_GET_ERASE_BLOCK_SZ 4
	How many sectors constitute a FLASH Erase block.

#define	DISK_IOCTL_CTRL_SYNC 5
	Commit any cached read/writes to disk.

#define	DISK_IOCTL_CTRL_INIT 6
	Initialize the disk.

#define	DISK_IOCTL_CTRL_DEINIT 7
	Deinitialize the disk.

#define	DISK_STATUS_OK 0x00
	Possible return bitmasks for disk_status()

#define	DISK_STATUS_UNINIT 0x01
	Disk status uninitialized.

#define	DISK_STATUS_NOMEDIA 0x02
	Disk status no media.

#define	DISK_STATUS_WR_PROTECT 0x04
	Disk status write protected.

Functions
int	disk_access_register (struct disk_info *disk)
	Register disk.

int	disk_access_unregister (struct disk_info *disk)
	Unregister disk.

Detailed Description

Disk Driver Interface .

Since: 1.6

Version: 1.0.0

Macro Definition Documentation

◆ DISK_IOCTL_CTRL_DEINIT

#define DISK_IOCTL_CTRL_DEINIT 7

#include <zephyr/drivers/disk.h>

Deinitialize the disk.

This IOCTL can be used to de-initialize the disk, enabling it to be removed from the system if the disk is hot-pluggable. Disk usage is reference counted, so for a given disk the DISK_IOCTL_CTRL_DEINIT IOCTL must be issued as many times as the DISK_IOCTL_CTRL_INIT IOCTL was issued in order to de-initialize it.

This macro optionally accepts a pointer to a boolean as the buf parameter, which if true indicates the disk should be forcibly stopped, ignoring all reference counts. The disk driver must report success if a forced stop is requested, but this operation is inherently unsafe.

◆ DISK_IOCTL_CTRL_INIT

#define DISK_IOCTL_CTRL_INIT 6

#include <zephyr/drivers/disk.h>

Initialize the disk.

This IOCTL must be issued before the disk can be used for I/O. It is reference counted, so only the first successful invocation of this macro on an uninitialized disk will initialize the IO device