Zephyr API Documentation
4.0.0
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
ifx_cat1-pinctrl.h
Go to the documentation of this file.
1
/* Copyright 2022 Cypress Semiconductor Corporation (an Infineon company) or
2
* an affiliate of Cypress Semiconductor Corporation
3
*
4
* SPDX-License-Identifier: Apache-2.0
5
*/
6
14
#define SOC_PINMUX_PORT_POS (0)
15
#define SOC_PINMUX_PORT_MASK (0xFFul << SOC_PINMUX_PORT_POS)
16
#define SOC_PINMUX_PIN_POS (8)
17
#define SOC_PINMUX_PIN_MASK (0xFFul << SOC_PINMUX_PIN_POS)
18
#define SOC_PINMUX_HSIOM_FUNC_POS (16)
19
#define SOC_PINMUX_HSIOM_MASK (0xFFul << SOC_PINMUX_HSIOM_FUNC_POS)
20
#define SOC_PINMUX_SIGNAL_POS (24)
21
#define SOC_PINMUX_SIGNAL_MASK (0xFFul << SOC_PINMUX_SIGNAL_POS)
22
26
#define HSIOM_SEL_GPIO (0)
27
#define HSIOM_SEL_GPIO_DSI (1)
28
#define HSIOM_SEL_DSI_DSI (2)
29
#define HSIOM_SEL_DSI_GPIO (3)
30
#define HSIOM_SEL_AMUXA (4)
31
#define HSIOM_SEL_AMUXB (5)
32
#define HSIOM_SEL_AMUXA_DSI (6)
33
#define HSIOM_SEL_AMUXB_DSI (7)
34
#define HSIOM_SEL_ACT_0 (8)
35
#define HSIOM_SEL_ACT_1 (9)
36
#define HSIOM_SEL_ACT_2 (10)
37
#define HSIOM_SEL_ACT_3 (11)
38
#define HSIOM_SEL_DS_0 (12)
39
#define HSIOM_SEL_DS_1 (13)
40
#define HSIOM_SEL_DS_2 (14)
41
#define HSIOM_SEL_DS_3 (15)
42
#define HSIOM_SEL_ACT_4 (16)
43
#define HSIOM_SEL_ACT_5 (17)
44
#define HSIOM_SEL_ACT_6 (18)
45
#define HSIOM_SEL_ACT_7 (19)
46
#define HSIOM_SEL_ACT_8 (20)
47
#define HSIOM_SEL_ACT_9 (21)
48
#define HSIOM_SEL_ACT_10 (22)
49
#define HSIOM_SEL_ACT_11 (23)
50
#define HSIOM_SEL_ACT_12 (24)
51
#define HSIOM_SEL_ACT_13 (25)
52
#define HSIOM_SEL_ACT_14 (26)
53
#define HSIOM_SEL_ACT_15 (27)
54
#define HSIOM_SEL_DS_4 (28)
55
#define HSIOM_SEL_DS_5 (29)
56
#define HSIOM_SEL_DS_6 (30)
57
#define HSIOM_SEL_DS_7 (31)
58
62
#define DT_CAT1_DRIVE_MODE_INFO(peripheral_signal) \
63
CAT1_PIN_MAP_DRIVE_MODE_##peripheral_signal
64
68
#define DT_CAT1_PINMUX(port, pin, hsiom) \
69
((port << SOC_PINMUX_PORT_POS) | \
70
(pin << SOC_PINMUX_PIN_POS) | \
71
(hsiom << SOC_PINMUX_HSIOM_FUNC_POS))
72
73
/* Redefine DT GPIO label (Px) to CYHAL port macros (CYHAL_PORT_x) */
74
#define P0 CYHAL_PORT_0
75
#define P1 CYHAL_PORT_1
76
#define P2 CYHAL_PORT_2
77
#define P3 CYHAL_PORT_3
78
#define P4 CYHAL_PORT_4
79
#define P5 CYHAL_PORT_5
80
#define P6 CYHAL_PORT_6
81
#define P7 CYHAL_PORT_7
82
#define P8 CYHAL_PORT_8
83
#define P9 CYHAL_PORT_9
84
#define P10 CYHAL_PORT_10
85
#define P11 CYHAL_PORT_11
86
#define P12 CYHAL_PORT_12
87
#define P13 CYHAL_PORT_13
88
#define P14 CYHAL_PORT_14
89
#define P15 CYHAL_PORT_15
90
#define P16 CYHAL_PORT_16
91
#define P17 CYHAL_PORT_17
92
#define P18 CYHAL_PORT_18
93
#define P19 CYHAL_PORT_19
94
#define P20 CYHAL_PORT_20
95
96
/* Returns CYHAL GPIO from Board device tree GPIO configuration
97
* CYHAL_GET_GPIO(port_number, pin_number),
98
* port_number = ((REG ADDR of node) - (REG ADDR of gpio_prt0)) / (REG SIZE of gpio_prt0)
99
* pin_number = DT_PHA_BY_IDX(node, gpios_prop, 0, pin)
100
*/
101
#define DT_GET_CYHAL_GPIO_FROM_DT_GPIOS(node, gpios_prop) \
102
CYHAL_GET_GPIO( \
103
(DT_REG_ADDR_BY_IDX(DT_GPIO_CTLR_BY_IDX(node, gpios_prop, 0), 0) - \
104
DT_REG_ADDR_BY_IDX(DT_NODELABEL(gpio_prt0), 0)) / \
105
DT_REG_ADDR_BY_IDX(DT_NODELABEL(gpio_prt0), 1), \
106
DT_PHA_BY_IDX(node, gpios_prop, 0, pin) \
107
)
zephyr
dt-bindings
pinctrl
ifx_cat1-pinctrl.h
Generated on Sat Nov 16 2024 04:55:03 for Zephyr API Documentation by
1.12.0