Zephyr API Documentation 4.0.0
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
kernel_structs.h
Go to the documentation of this file.
1/*
2 * Copyright (c) 2016 Wind River Systems, Inc.
3 *
4 * SPDX-License-Identifier: Apache-2.0
5 */
6
7/*
8 * The purpose of this file is to provide essential/minimal kernel structure
9 * definitions, so that they can be used without including kernel.h.
10 *
11 * The following rules must be observed:
12 * 1. kernel_structs.h shall not depend on kernel.h both directly and
13 * indirectly (i.e. it shall not include any header files that include
14 * kernel.h in their dependency chain).
15 * 2. kernel.h shall imply kernel_structs.h, such that it shall not be
16 * necessary to include kernel_structs.h explicitly when kernel.h is
17 * included.
18 */
19
20#ifndef ZEPHYR_KERNEL_INCLUDE_KERNEL_STRUCTS_H_
21#define ZEPHYR_KERNEL_INCLUDE_KERNEL_STRUCTS_H_
22
23#if !defined(_ASMLANGUAGE)
24#include <zephyr/sys/atomic.h>
25#include <zephyr/types.h>
26#include <zephyr/sys/dlist.h>
27#include <zephyr/sys/util.h>
28#include <zephyr/sys/sys_heap.h>
29#include <zephyr/arch/structs.h>
30#include <zephyr/kernel/stats.h>
32#include <zephyr/sys/rb.h>
33#endif
34
35#define K_NUM_THREAD_PRIO (CONFIG_NUM_PREEMPT_PRIORITIES + CONFIG_NUM_COOP_PRIORITIES + 1)
36#define PRIQ_BITMAP_SIZE (DIV_ROUND_UP(K_NUM_THREAD_PRIO, BITS_PER_LONG))
37
38#ifdef __cplusplus
39extern "C" {
40#endif
41
42/*
43 * Bitmask definitions for the struct k_thread.thread_state field.
44 *
45 * Must be before kernel_arch_data.h because it might need them to be already
46 * defined.
47 */
48
49/* states: common uses low bits, arch-specific use high bits */
50
51/* Not a real thread */
52#define _THREAD_DUMMY (BIT(0))
53
54/* Thread is waiting on an object */
55#define _THREAD_PENDING (BIT(1))
56
57/* Thread has not yet started */
58#define _THREAD_PRESTART (BIT(2))
59
60/* Thread has terminated */
61#define _THREAD_DEAD (BIT(3))
62
63/* Thread is suspended */
64#define _THREAD_SUSPENDED (BIT(4))
65
66/* Thread is in the process of aborting */
67#define _THREAD_ABORTING (BIT(5))
68
69/* Thread is in the process of suspending */
70#define _THREAD_SUSPENDING (BIT(6))
71
72/* Thread is present in the ready queue */
73#define _THREAD_QUEUED (BIT(7))
74
75/* end - states */
76
77#ifdef CONFIG_STACK_SENTINEL
78/* Magic value in lowest bytes of the stack */
79#define STACK_SENTINEL 0xF0F0F0F0
80#endif
81
82/* lowest value of _thread_base.preempt at which a thread is non-preemptible */
83#define _NON_PREEMPT_THRESHOLD 0x0080U
84
85/* highest value of _thread_base.preempt at which a thread is preemptible */
86#define _PREEMPT_THRESHOLD (_NON_PREEMPT_THRESHOLD - 1U)
87
88#if !defined(_ASMLANGUAGE)
89
90/* Two abstractions are defined here for "thread priority queues".
91 *
92 * One is a "dumb" list implementation appropriate for systems with
93 * small numbers of threads and sensitive to code size. It is stored
94 * in sorted order, taking an O(N) cost every time a thread is added
95 * to the list. This corresponds to the way the original _wait_q_t
96 * abstraction worked and is very fast as long as the number of
97 * threads is small.
98 *
99 * The other is a balanced tree "fast" implementation with rather
100 * larger code size (due to the data structure itself, the code here
101 * is just stubs) and higher constant-factor performance overhead, but
102 * much better O(logN) scaling in the presence of large number of
103 * threads.
104 *
105 * Each can be used for either the wait_q or system ready queue,
106 * configurable at build time.
107 */
108
109struct _priq_rb {
110 struct rbtree tree;
111 int next_order_key;
112};
113
114
115/* Traditional/textbook "multi-queue" structure. Separate lists for a
116 * small number (max 32 here) of fixed priorities. This corresponds
117 * to the original Zephyr scheduler. RAM requirements are
118 * comparatively high, but performance is very fast. Won't work with
119 * features like deadline scheduling which need large priority spaces
120 * to represent their requirements.
121 */
122struct _priq_mq {
124 unsigned long bitmask[PRIQ_BITMAP_SIZE];
125};
126
127struct _ready_q {
128#ifndef CONFIG_SMP
129 /* always contains next thread to run: cannot be NULL */
130 struct k_thread *cache;
131#endif
132
133#if defined(CONFIG_SCHED_DUMB)
134 sys_dlist_t runq;
135#elif defined(CONFIG_SCHED_SCALABLE)
136 struct _priq_rb runq;
137#elif defined(CONFIG_SCHED_MULTIQ)
138 struct _priq_mq runq;
139#endif
140};
141
142typedef struct _ready_q _ready_q_t;
143
144struct _cpu {
145 /* nested interrupt count */
146 uint32_t nested;
147
148 /* interrupt stack pointer base */
149 char *irq_stack;
150
151 /* currently scheduled thread */
152 struct k_thread *current;
153
154 /* one assigned idle thread per CPU */
155 struct k_thread *idle_thread;
156
157#ifdef CONFIG_SCHED_CPU_MASK_PIN_ONLY
158 struct _ready_q ready_q;
159#endif
160
161#if (CONFIG_NUM_METAIRQ_PRIORITIES > 0) && \
162 (CONFIG_NUM_COOP_PRIORITIES > CONFIG_NUM_METAIRQ_PRIORITIES)
163 /* Coop thread preempted by current metairq, or NULL */
164 struct k_thread *metairq_preempted;
165#endif
166
167 uint8_t id;
168
169#if defined(CONFIG_FPU_SHARING)
170 void *fp_ctx;
171#endif
172
173#ifdef CONFIG_SMP
174 /* True when _current is allowed to context switch */
175 uint8_t swap_ok;
176#endif
177
178#ifdef CONFIG_SCHED_THREAD_USAGE
179 /*
180 * [usage0] is used as a timestamp to mark the beginning of an
181 * execution window. [0] is a special value indicating that it
182 * has been stopped (but not disabled).
183 */
184
185 uint32_t usage0;
186
187#ifdef CONFIG_SCHED_THREAD_USAGE_ALL
188 struct k_cycle_stats *usage;
189#endif
190#endif
191
192#ifdef CONFIG_OBJ_CORE_SYSTEM
193 struct k_obj_core obj_core;
194#endif
195
196 /* Per CPU architecture specifics */
197 struct _cpu_arch arch;
198};
199
200typedef struct _cpu _cpu_t;
201
202struct z_kernel {
203 struct _cpu cpus[CONFIG_MP_MAX_NUM_CPUS];
204
205#ifdef CONFIG_PM
206 int32_t idle; /* Number of ticks for kernel idling */
207#endif
208
209 /*
210 * ready queue: can be big, keep after small fields, since some
211 * assembly (e.g. ARC) are limited in the encoding of the offset
212 */
213#ifndef CONFIG_SCHED_CPU_MASK_PIN_ONLY
214 struct _ready_q ready_q;
215#endif
216
217#ifdef CONFIG_FPU_SHARING
218 /*
219 * A 'current_sse' field does not exist in addition to the 'current_fp'
220 * field since it's not possible to divide the IA-32 non-integer
221 * registers into 2 distinct blocks owned by differing threads. In
222 * other words, given that the 'fxnsave/fxrstor' instructions
223 * save/restore both the X87 FPU and XMM registers, it's not possible
224 * for a thread to only "own" the XMM registers.
225 */
226
227 /* thread that owns the FP regs */
228 struct k_thread *current_fp;
229#endif
230
231#if defined(CONFIG_THREAD_MONITOR)
232 struct k_thread *threads; /* singly linked list of ALL threads */
233#endif
234#ifdef CONFIG_SCHED_THREAD_USAGE_ALL
235 struct k_cycle_stats usage[CONFIG_MP_MAX_NUM_CPUS];
236#endif
237
238#ifdef CONFIG_OBJ_CORE_SYSTEM
239 struct k_obj_core obj_core;
240#endif
241
242#if defined(CONFIG_SMP) && defined(CONFIG_SCHED_IPI_SUPPORTED)
243 /* Identify CPUs to send IPIs to at the next scheduling point */
244 atomic_t pending_ipi;
245#endif
246};
247
248typedef struct z_kernel _kernel_t;
249
250extern struct z_kernel _kernel;
251
252extern atomic_t _cpus_active;
253
254#ifdef CONFIG_SMP
255
256/* True if the current context can be preempted and migrated to
257 * another SMP CPU.
258 */
259bool z_smp_cpu_mobile(void);
260
261#define _current_cpu ({ __ASSERT_NO_MSG(!z_smp_cpu_mobile()); \
262 arch_curr_cpu(); })
263#define _current k_sched_current_thread_query()
264
265#else
266#define _current_cpu (&_kernel.cpus[0])
267#define _current _kernel.cpus[0].current
268#endif
269
270/* kernel wait queue record */
271#ifdef CONFIG_WAITQ_SCALABLE
272
273typedef struct {
274 struct _priq_rb waitq;
275} _wait_q_t;
276
277/* defined in kernel/priority_queues.c */
278bool z_priq_rb_lessthan(struct rbnode *a, struct rbnode *b);
279
280#define Z_WAIT_Q_INIT(wait_q) { { { .lessthan_fn = z_priq_rb_lessthan } } }
281
282#else
283
284typedef struct {
285 sys_dlist_t waitq;
286} _wait_q_t;
287
288#define Z_WAIT_Q_INIT(wait_q) { SYS_DLIST_STATIC_INIT(&(wait_q)->waitq) }
289
290#endif /* CONFIG_WAITQ_SCALABLE */
291
292/* kernel timeout record */
293struct _timeout;
294typedef void (*_timeout_func_t)(struct _timeout *t);
295
296struct _timeout {
297 sys_dnode_t node;
298 _timeout_func_t fn;
299#ifdef CONFIG_TIMEOUT_64BIT
300 /* Can't use k_ticks_t for header dependency reasons */
301 int64_t dticks;
302#else
303 int32_t dticks;
304#endif
305};
306
307typedef void (*k_thread_timeslice_fn_t)(struct k_thread *thread, void *data);
308
309#ifdef __cplusplus
310}
311#endif
312
313#endif /* _ASMLANGUAGE */
314
315#endif /* ZEPHYR_KERNEL_INCLUDE_KERNEL_STRUCTS_H_ */
long atomic_t
Definition atomic_types.h:15
struct _dnode sys_dnode_t
Doubly-linked list node structure.
Definition dlist.h:54
struct _dnode sys_dlist_t
Doubly-linked list structure.
Definition dlist.h:50
#define PRIQ_BITMAP_SIZE
Definition kernel_structs.h:36
void(* k_thread_timeslice_fn_t)(struct k_thread *thread, void *data)
Definition kernel_structs.h:307
#define K_NUM_THREAD_PRIO
Definition kernel_structs.h:35
__UINT32_TYPE__ uint32_t
Definition stdint.h:90
__INT32_TYPE__ int32_t
Definition stdint.h:74
__UINT8_TYPE__ uint8_t
Definition stdint.h:88
__INT64_TYPE__ int64_t
Definition stdint.h:75
Structure used to track internal statistics about both thread and CPU usage.
Definition stats.h:18
Object core structure.
Definition obj_core.h:121
Thread Structure.
Definition thread.h:259
Balanced red/black tree node structure.
Definition rb.h:58
Balanced red/black tree structure.
Definition rb.h:91
Misc utilities.