The latest development version of this page may be more current than this released 4.0.0 version.

Dining Philosophers

Browse source code on GitHub

Overview

An implementation of a solution to the Dining Philosophers problem (a classic multi-thread synchronization problem). This particular implementation demonstrates the usage of multiple preemptible and cooperative threads of differing priorities, as well as dynamic mutexes and thread sleeping.

The philosopher always tries to get the lowest fork first (f1 then f2). When done, he will give back the forks in the reverse order (f2 then f1). If he gets two forks, he is EATING. Otherwise, he is THINKING. Transitional states are shown as well, such as STARVING when the philosopher is hungry but the forks are not available, and HOLDING ONE FORK when a philosopher is waiting for the second fork to be available.

Each Philosopher will randomly alternate between the EATING and THINKING states.

It is possible to run the demo in coop-only or preempt-only mode. To achieve this, set these values for CONFIG_NUM_COOP_PRIORITIES and CONFIG_NUM_PREEMPT_PRIORITIES in prj.conf:

preempt-only
CONFIG_NUM_PREEMPT_PRIORITIES=6
CONFIG_NUM_COOP_PRIORITIES=0
coop-only
CONFIG_NUM_PREEMPT_PRIORITIES=0
CONFIG_NUM_COOP_PRIORITIES=6

In these cases, the philosopher threads will run with priorities 0 to 5 (preempt-only) and -7 to -2 (coop-only).

Building and Running

This project outputs to the console. It can be built and executed on QEMU as follows:

west build -b qemu_x86 samples/philosophers
west build -t run

Sample Output

Philosopher 0 [P: 3]  HOLDING ONE FORK
Philosopher 1 [P: 2]  HOLDING ONE FORK
Philosopher 2 [P: 1]  EATING  [ 1900 ms ]
Philosopher 3 [P: 0]  THINKING [ 2500 ms ]
Philosopher 4 [C:-1]  THINKING [ 2200 ms ]
Philosopher 5 [C:-2]  THINKING [ 1700 ms ]

Exit QEMU by pressing CTRL+A x.

Debug Threads

The philosophers sample by default enables CONFIG_DEBUG_THREAD_INFO. This allows tools like OpenOCD and J-link to inspect thread data using info threads.

west build -b <board_name> samples/philosophers
west debug

OpenOCD Sample Output

Thread 1 received signal SIGINT, Interrupt.
[Switching to Thread 537003160]
arch_cpu_idle () at zephyr/mainline/zephyr/arch/arm/core/cpu_idle.S:107
107          cpsie   i
(gdb) i threads
  Id   Target Id                                                  Frame
* 1    Thread 537003160 (Name: idle 00, prio:40,useropts:1)       arch_cpu_idle () at zephyr/mainline/zephyr/arch/arm/core/cpu_idle.S:107
Info : Getting thread 537002984 reg list
  2    Thread 537002984 (Name: Philosopher 5, prio:-2,useropts:4) 0x08001404 in arch_irq_unlock (key=0) at zephyr/mainline/zephyr/include/arch/arm/asm_inline_gcc.h:95
Info : Getting thread 537002808 reg list
  3    Thread 537002808 (Name: Philosopher 4, prio:-1,useropts:4) 0x08001404 in arch_irq_unlock (key=0) at zephyr/mainline/zephyr/include/arch/arm/asm_inline_gcc.h:95
Info : Getting thread 537002632 reg list
  4    Thread 537002632 (Name: Philosopher 3, prio:0,useropts:4)  0x08001404 in arch_irq_unlock (key=0) at zephyr/mainline/zephyr/include/arch/arm/asm_inline_gcc.h:95
Info : Getting thread 537002456 reg list
  5    Thread 537002456 (Name: Philosopher 2, prio:1,useropts:4)  0x08001404 in arch_irq_unlock (key=0) at zephyr/mainline/zephyr/include/arch/arm/asm_inline_gcc.h:95
Info : Getting thread 537002280 reg list
  6    Thread 537002280 (Name: Philosopher 1, prio:2,useropts:4)  0x08001404 in arch_irq_unlock (key=0) at zephyr/mainline/zephyr/include/arch/arm/asm_inline_gcc.h:95
Info : Getting thread 537002104 reg list
  7    Thread 537002104 (Name: Philosopher 0, prio:3,useropts:4)  0x08001404 in arch_irq_unlock (key=0) at zephyr/mainline/zephyr/include/arch/arm/asm_inline_gcc.h:95

Philosopher 0 [P: 3]        STARVING
Philosopher 1 [P: 2]    HOLDING ONE FORK
Philosopher 2 [P: 1]   EATING  [  400 ms ]
Philosopher 3 [P: 0]  THINKING [  525 ms ]
Philosopher 4 [C:-1]    HOLDING ONE FORK
Philosopher 5 [C:-2]   EATING  [  625 ms ]

See also

Semaphore APIs
Mutex APIs
Stack APIs
Thread APIs
FIFO APIs
LIFO APIs