The latest development version of this page may be more current than this released 4.0.0 version.

TF-M Requirements

The following are some of the boards that can be used with TF-M:

Board	NSPE board name
ARM MPS2+ AN521	mps2/an521/cpu0/ns (qemu supported)
ARM MPS3	mps3/corstone300/an547/ns (qemu supported)
BL5340 DVK	bl5340_dvk/nrf5340/cpuapp/ns
LPCXPRESSO55S69	lpcxpresso55s69_ns
nRF9160 DK	nrf9160dk/nrf9160/ns
nRF5340 DK	nrf5340dk/nrf5340/cpuapp/ns
B-U585I-IOT02A Discovery kit	b_u585i_iot02a/stm32u585xx/ns
Nucleo L552ZE Q	nucleo_l552ze_q/stm32l552xx/ns
STM32L562E-DK Discovery	stm32l562e_dk/stm32l562xx/ns
ARM V2M Musca B1	v2m_musca_b1/musca_b1/ns
ARM V2M Musca-S1	v2m_musca_s1/musca_s1/ns

To make sure TF-M is supported for a board in its output, check that CONFIG_TRUSTED_EXECUTION_NONSECURE is set to y in that board’s default configuration.

Software Requirements

The following Python modules are required when building TF-M binaries:

• cryptography

• pyasn1

• pyyaml

• cbor>=1.0.0

• imgtool>=1.9.0

• jinja2

• click

You can install them via:

$ pip3 install --user cryptography pyasn1 pyyaml cbor>=1.0.0 imgtool>=1.9.0 jinja2 click

They are used by TF-M’s signing utility to prepare firmware images for validation by the bootloader.

Part of the process of generating binaries for QEMU and merging signed secure and non-secure binaries on certain platforms also requires the use of the srec_cat utility.

This can be installed on Linux via:

$ sudo apt-get install srecord

And on OS X via:

$ brew install srecord

For Windows-based systems, please make sure you have a copy of the utility available on your system path. See, for example: SRecord for Windows