Line data    Source code

       1            1 : /*
       2              :  * Copyright 2022 NXP
       3              :  *
       4              :  * SPDX-License-Identifier: Apache-2.0
       5              :  */
       6              : 
       7              : /**
       8              :  * @file
       9              :  * @brief Public API for SD memory card subsystem
      10              :  */
      11              : 
      12              : #ifndef ZEPHYR_INCLUDE_SD_SDMMC_H_
      13              : #define ZEPHYR_INCLUDE_SD_SDMMC_H_
      14              : 
      15              : #include <zephyr/device.h>
      16              : #include <zephyr/drivers/sdhc.h>
      17              : #include <zephyr/sd/sd.h>
      18              : 
      19              : #ifdef __cplusplus
      20              : extern "C" {
      21              : #endif
      22              : 
      23              : /**
      24              :  * @brief Write blocks to SD card from buffer
      25              :  *
      26              :  * Writes blocks from SD buffer to SD card. For best performance, this buffer
      27              :  * should be aligned to CONFIG_SDHC_BUFFER_ALIGNMENT
      28              :  * @param card SD card to write from
      29              :  * @param wbuf write buffer
      30              :  * @param start_block first block to write to
      31              :  * @param num_blocks number of blocks to write
      32              :  * @retval 0 write succeeded
      33              :  * @retval -EBUSY: card is busy with another request
      34              :  * @retval -ETIMEDOUT: card write timed out
      35              :  * @retval -EIO: I/O error
      36              :  */
      37            1 : int sdmmc_write_blocks(struct sd_card *card, const uint8_t *wbuf,
      38              :         uint32_t start_block, uint32_t num_blocks);
      39              : 
      40              : /**
      41              :  * @brief Read block from SD card to buffer
      42              :  *
      43              :  * Reads blocks into SD buffer from SD card. For best performance, this buffer
      44              :  * should be aligned to CONFIG_SDHC_BUFFER_ALIGNMENT
      45              :  * @param card SD card to read from
      46              :  * @param rbuf read buffer
      47              :  * @param start_block first block to read from
      48              :  * @param num_blocks number of blocks to read
      49              :  * @retval 0 read succeeded
      50              :  * @retval -EBUSY: card is busy with another request
      51              :  * @retval -ETIMEDOUT: card read timed out
      52              :  * @retval -EIO: I/O error
      53              :  */
      54            1 : int sdmmc_read_blocks(struct sd_card *card, uint8_t *rbuf,
      55              :         uint32_t start_block, uint32_t num_blocks);
      56              : 
      57              : /**
      58              :  * @brief Get I/O control data from SD card
      59              :  *
      60              :  * Sends I/O control commands to SD card.
      61              :  * @param card SD card
      62              :  * @param cmd I/O control command
      63              :  * @param buf I/O control buf
      64              :  * @retval 0 IOCTL command succeeded
      65              :  * @retval -ENOTSUP: IOCTL command not supported
      66              :  * @retval -EIO: I/O failure
      67              :  */
      68            1 : int sdmmc_ioctl(struct sd_card *card, uint8_t cmd, void *buf);
      69              : 
      70              : #ifdef __cplusplus
      71              : }
      72              : #endif
      73              : 
      74              : #endif /* ZEPHYR_INCLUDE_SD_SDMMC_H_ */