Zephyr API Documentation
3.7.99
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
uart_intel_lw.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2023 Intel Corporation
3
*
4
* SPDX-License-Identifier: Apache-2.0
5
*/
6
11
#ifndef ZEPHYR_DRIVERS_SERIAL_UART_INTEL_LW_H_
12
#define ZEPHYR_DRIVERS_SERIAL_UART_INTEL_LW_H_
13
14
/* End of packet feature.
15
* Driver will trigger interrupt upon receiving end of package character.
16
* Please enable CONFIG_UART_INTEL_LW_EOP to use this feature.
17
* Use the api: uart_drv_cmd with CMD_ENABLE_EOP to enable the feature.
18
* This cmd will write the ip register and also set a flag to the driver.
19
* The flag will modify uart_irq_callback_user_data_set
20
* to set call back function for eop interrupt.
21
* Flag is cleared after uart_irq_callback_user_data_set is called.
22
*/
23
#define CMD_ENABLE_EOP 0x01
24
#define CMD_DISABLE_EOP 0x02
25
26
/* Transmit break feature.
27
* Use uart_drv_cmd with CMD_TRBK_EN to break ongoing transmit.
28
* After this cmd, uart is unable to transmit any data.
29
* Please use CMD_TRBK_DIS to resume normal operation.
30
* Please also call uart_intel_lw_err_check, to clear the error caused
31
* by transmit break.
32
*/
33
#define CMD_TRBK_EN 0x03
34
#define CMD_TRBK_DIS 0x04
35
36
/* This driver supports interrupt driven api.
37
* Polling for data under normal operation, might cause unexpected behaviour.
38
* If users wish to poll for data, please use the api:
39
* uart_drv_cmd with CMD_POLL_ASSERT_RTS before polling out/in.
40
* Then use CMD_POLL_DEASSERT_RTS to resume normal operation after polling.
41
*/
42
#define CMD_POLL_ASSERT_RTS 0x05
43
#define CMD_POLL_DEASSERT_RTS 0x06
44
45
#endif
/* ZEPHYR_DRIVERS_SERIAL_UART_INTEL_LW_H_ */
zephyr
drivers
serial
uart_intel_lw.h
Generated on Sat Sep 7 2024 21:06:07 for Zephyr API Documentation by
1.12.0