Trinamic Stepper Controller Interface . More...

Data Structures
struct	tmc_ramp_generator_data
	Trinamic Stepper Ramp Generator data. More...

Macros
#define	TMC_RAMP_VSTART_MAX GENMASK(17, 0)
	Trinamic stepper controller ramp generator data limits.

#define	TMC_RAMP_VSTART_MIN 0

#define	TMC_RAMP_V1_MAX GENMASK(19, 0)

#define	TMC_RAMP_V1_MIN 0

#define	TMC_RAMP_VMAX_MAX (GENMASK(22, 0) - 512)

#define	TMC_RAMP_VMAX_MIN 0

#define	TMC_RAMP_A1_MAX GENMASK(15, 0)

#define	TMC_RAMP_A1_MIN 0

#define	TMC_RAMP_AMAX_MAX GENMASK(15, 0)

#define	TMC_RAMP_AMAX_MIN 0

#define	TMC_RAMP_D1_MAX GENMASK(15, 0)

#define	TMC_RAMP_D1_MIN 1

#define	TMC_RAMP_DMAX_MAX GENMASK(15, 0)

#define	TMC_RAMP_DMAX_MIN 0

#define	TMC_RAMP_VSTOP_MAX GENMASK(17, 0)

#define	TMC_RAMP_VSTOP_MIN 1

#define	TMC_RAMP_TZEROWAIT_MAX (GENMASK(15, 0) - 512)

#define	TMC_RAMP_TZEROWAIT_MIN 0

#define	TMC_RAMP_VCOOLTHRS_MAX GENMASK(22, 0)

#define	TMC_RAMP_VCOOLTHRS_MIN 0

#define	TMC_RAMP_VHIGH_MAX GENMASK(22, 0)

#define	TMC_RAMP_VHIGH_MIN 0

#define	TMC_RAMP_IHOLD_IRUN_MAX GENMASK(4, 0)

#define	TMC_RAMP_IHOLD_IRUN_MIN 0

#define	TMC_RAMP_IHOLDDELAY_MAX GENMASK(3, 0)

#define	TMC_RAMP_IHOLDDELAY_MIN 0

#define	TMC_RAMP_VACTUAL_SHIFT 22

#define	CHECK_RAMP_DT_DATA(node)
	Check if Ramp DT data is within limits.

#define	TMC_RAMP_DT_SPEC_GET(node)
	Get Trinamic Stepper Ramp Generator data from DT.

Functions
int	tmc5041_stepper_set_ramp (const struct device dev, const struct tmc_ramp_generator_data ramp_data)
	Configure Trinamic Stepper Ramp Generator.

Detailed Description

Trinamic Stepper Controller Interface .

Macro Definition Documentation

◆ CHECK_RAMP_DT_DATA

#define CHECK_RAMP_DT_DATA ( node )

#include <zephyr/drivers/stepper/stepper_trinamic.h>

Value:

        COND_CODE_1(DT_PROP_EXISTS(node, vstart),                                       \
                BUILD_ASSERT(IN_RANGE(DT_PROP(node, vstart), TMC_RAMP_VSTART_MIN,       \
                              TMC_RAMP_VSTART_MAX), "vstart out of range"), ());        \
        COND_CODE_1(DT_PROP_EXISTS(node, v1),                                           \
                BUILD_ASSERT(IN_RANGE(DT_PROP(node, v1), TMC_RAMP_V1_MIN,               \
                              TMC_RAMP_V1_MAX), "v1 out of range"), ());                \
        COND_CODE_1(DT_PROP_EXISTS(node, vmax),                                         \
                BUILD_ASSERT(IN_RANGE(DT_PROP(node, vmax), TMC_RAMP_VMAX_MIN,           \
                              TMC_RAMP_VMAX_MAX), "vmax out of range"), ());            \
        COND_CODE_1(DT_PROP_EXISTS(node, a1),                                           \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, a1), TMC_RAMP_A1_MIN,                       \
                              TMC_RAMP_A1_MAX), "a1 out of range"), ());                \
        COND_CODE_1(DT_PROP_EXISTS(node, amax),                                         \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, amax), TMC_RAMP_AMAX_MIN,                   \
                              TMC_RAMP_AMAX_MAX), "amax out of range"), ());            \
        COND_CODE_1(DT_PROP_EXISTS(node, d1),                                           \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, d1), TMC_RAMP_D1_MIN,                       \
                              TMC_RAMP_D1_MAX), "d1 out of range"), ());                \
        COND_CODE_1(DT_PROP_EXISTS(node, dmax),                                         \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, dmax), TMC_RAMP_DMAX_MIN,                   \
                              TMC_RAMP_DMAX_MAX), "dmax out of range"), ());            \
        COND_CODE_1(DT_PROP_EXISTS(node, vstop),                                        \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, vstop), TMC_RAMP_VSTOP_MIN,                 \
                              TMC_RAMP_VSTOP_MAX), "vstop out of range"), ());          \
        COND_CODE_1(DT_PROP_EXISTS(node, tzerowait),                                    \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, tzerowait), TMC_RAMP_TZEROWAIT_MIN,         \
                              TMC_RAMP_TZEROWAIT_MAX), "tzerowait out of range"), ());  \
        COND_CODE_1(DT_PROP_EXISTS(node, vcoolthrs),                                    \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, vcoolthrs), TMC_RAMP_VCOOLTHRS_MIN,         \
                              TMC_RAMP_VCOOLTHRS_MAX), "vcoolthrs out of range"), ());  \
        COND_CODE_1(DT_PROP_EXISTS(node, vhigh),                                        \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, vhigh), TMC_RAMP_VHIGH_MIN,                 \
                              TMC_RAMP_VHIGH_MAX), "vhigh out of range"), ());          \
        COND_CODE_1(DT_PROP_EXISTS(node, ihold),                                        \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, ihold), TMC_RAMP_IHOLD_IRUN_MIN,            \
                              TMC_RAMP_IHOLD_IRUN_MAX), "ihold out of range"), ());     \
        COND_CODE_1(DT_PROP_EXISTS(node, irun),                                         \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, irun), TMC_RAMP_IHOLD_IRUN_MIN,             \
                              TMC_RAMP_IHOLD_IRUN_MAX), "irun out of range"), ());      \
        COND_CODE_1(DT_PROP_EXISTS(node, iholddelay),                                   \
        BUILD_ASSERT(IN_RANGE(DT_PROP(node, iholddelay), TMC_RAMP_IHOLDDELAY_MIN,       \
                              TMC_RAMP_IHOLDDELAY_MAX), "iholddelay out of range"), ());

Check if Ramp DT data is within limits.

◆ TMC_RAMP_A1_MAX

#define TMC_RAMP_A1_MAX GENMASK(15, 0)

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_A1_MIN

#define TMC_RAMP_A1_MIN 0

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_AMAX_MAX

#define TMC_RAMP_AMAX_MAX GENMASK(15, 0)

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_AMAX_MIN

#define TMC_RAMP_AMAX_MIN 0

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_D1_MAX

#define TMC_RAMP_D1_MAX GENMASK(15, 0)

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_D1_MIN

#define TMC_RAMP_D1_MIN 1

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_DMAX_MAX

#define TMC_RAMP_DMAX_MAX GENMASK(15, 0)

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_DMAX_MIN

#define TMC_RAMP_DMAX_MIN 0

#include <zephyr/drivers/stepper/stepper_trinamic.h>

◆ TMC_RAMP_DT_SPEC_GET

#define TMC_RAMP_DT_SPEC_GET ( node )

#include <zephyr/drivers/stepper/stepper_trinamic.h>

Value:

        {                                                                       \
                .vstart = DT_PROP(node, vstart),                                \
                .v1 = DT_PROP(node, v1),                                        \
                .vmax = DT_PROP(node, vmax),                                    \
                .a1 = DT_PROP(node, a1),                                        \
                .amax = DT_PROP(node, amax),                                    \
                .d1 = DT_PROP(node, d1),                                        \
                .dmax = DT_PROP(node, dmax),                                    \
                .vstop = DT_PROP(node, vstop),                                  \
                .tzerowait = DT_PROP(node, tzerowait),                          \
                .vcoolthrs = DT_PROP(node, vcoolthrs),                          \
                .vhigh = DT_PROP(node, vhigh),                                  \
                .iholdrun = (TMC5XXX_IRUN(DT_PROP(node, irun)) |                \
                             TMC5XXX_IHOLD(DT_PROP(node, ihold)) |              \
                             TMC5XXX_IHOLDDELAY(DT_PROP(node, iholddelay))),    \
        }