Configuration Options

Introduction

Kconfig files describe the configuration symbols supported in the build system, the logical organization and structure that group the symbols in menus and sub-menus, and the relationships between the different configuration symbols that govern the valid configuration combinations.

The Kconfig files are distributed across the build directory tree. The files are organized based on their common characteristics and on what new symbols they add to the configuration menus.

The configuration options’ information below is extracted directly from Kconfig. Click on the option name in the table below for detailed information about each option.

Supported Options

Alphabetized Index of Configuration Options
Kconfig Symbol Description
CONFIG_2ND_LEVEL_INTERRUPTS Second-level interrupt support
CONFIG_2ND_LVL_INTR_00_OFFSET Level 1 IRQ line for 2ND level aggregator 0
CONFIG_2ND_LVL_INTR_01_OFFSET Level 1 IRQ line for 2ND level aggregator 1
CONFIG_2ND_LVL_INTR_02_OFFSET Level 1 IRQ line for 2ND level aggregator 2
CONFIG_2ND_LVL_INTR_03_OFFSET Level 1 IRQ line for 2ND level aggregator 3
CONFIG_2ND_LVL_INTR_04_OFFSET Level 1 IRQ line for 2ND level aggregator 4
CONFIG_2ND_LVL_INTR_05_OFFSET Level 1 IRQ line for 2ND level aggregator 5
CONFIG_2ND_LVL_INTR_06_OFFSET Level 1 IRQ line for 2ND level aggregator 6
CONFIG_2ND_LVL_INTR_07_OFFSET Level 1 IRQ line for 2ND level aggregator 7
CONFIG_2ND_LVL_ISR_TBL_OFFSET Offset in _sw_isr_table for level 2 interrupts
CONFIG_3RD_LEVEL_INTERRUPTS Third-level interrupt support
CONFIG_3RD_LVL_INTR_00_OFFSET Level 2 IRQ line for 3RD level aggregator 0
CONFIG_3RD_LVL_INTR_01_OFFSET Level 2 IRQ line for 3RD level aggregator 1
CONFIG_3RD_LVL_INTR_02_OFFSET Level 2 IRQ line for 3RD level aggregator 2
CONFIG_3RD_LVL_INTR_03_OFFSET Level 2 IRQ line for 3RD level aggregator 3
CONFIG_3RD_LVL_INTR_04_OFFSET Level 2 IRQ line for 3RD level aggregator 4
CONFIG_3RD_LVL_INTR_05_OFFSET Level 2 IRQ line for 3RD level aggregator 5
CONFIG_3RD_LVL_INTR_06_OFFSET Level 2 IRQ line for 3RD level aggregator 6
CONFIG_3RD_LVL_INTR_07_OFFSET Level 2 IRQ line for 3RD level aggregator 7
CONFIG_3RD_LVL_ISR_TBL_OFFSET Offset in _sw_isr_table for level 3 interrupts
CONFIG_64BIT  
CONFIG_ADC ADC drivers
CONFIG_ADC_0 Enable ADC 0
CONFIG_ADC_1 Enable ADC 1 / ADC1
CONFIG_ADC_2 Enable ADC 2
CONFIG_ADC_ASYNC Enable asynchronous call support
CONFIG_ADC_CONFIGURABLE_INPUTS  
CONFIG_ADC_INIT_PRIORITY Init priority
CONFIG_ADC_LOG_LEVEL  
CONFIG_ADC_LOG_LEVEL_DBG Debug
CONFIG_ADC_LOG_LEVEL_ERR Error
CONFIG_ADC_LOG_LEVEL_INF Info
CONFIG_ADC_LOG_LEVEL_OFF Off
CONFIG_ADC_LOG_LEVEL_WRN Warning
CONFIG_ADC_MCUX_ADC12 MCUX ADC12 driver
CONFIG_ADC_MCUX_ADC16 MCUX ADC16 driver
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_1 Divide ratio is 1
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_2 Divide ratio is 2
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_4 Divide ratio is 4
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_8 Divide ratio is 8
CONFIG_ADC_MCUX_ADC16_VREF_ALTERNATE Alternate reference pair
CONFIG_ADC_MCUX_ADC16_VREF_DEFAULT Default voltage reference pair V_REFH and V_REFL
CONFIG_ADC_NRFX_ADC nRF ADC nrfx driver
CONFIG_ADC_NRFX_ADC_CHANNEL_COUNT Number of ADC channels
CONFIG_ADC_NRFX_SAADC nRF SAADC nrfx driver
CONFIG_ADC_SAM0 Atmel SAM0 series ADC Driver
CONFIG_ADC_SAM_AFEC SAM ADC Driver
CONFIG_ADC_SHELL Enable ADC Shell
CONFIG_ADC_STM32 STM32 ADC driver
CONFIG_ADT7420 ADT7420 Temperature Sensor
CONFIG_ADT7420_TEMP_CRIT Critical overtemperature in °C
CONFIG_ADT7420_TEMP_HYST Temperature hysteresis in °C
CONFIG_ADT7420_THREAD_PRIORITY Thread priority
CONFIG_ADT7420_THREAD_STACK_SIZE Thread stack size
CONFIG_ADT7420_TRIGGER  
CONFIG_ADT7420_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_ADT7420_TRIGGER_NONE No trigger
CONFIG_ADT7420_TRIGGER_OWN_THREAD Use own thread
CONFIG_ADXL362 ADXL362 sensor
CONFIG_ADXL362_ABS_REF_MODE Absolute or referenced interrupt
CONFIG_ADXL362_ACCEL_ODR_100 100 Hz
CONFIG_ADXL362_ACCEL_ODR_12_5 12.5 Hz
CONFIG_ADXL362_ACCEL_ODR_200 200 Hz
CONFIG_ADXL362_ACCEL_ODR_25 25 Hz
CONFIG_ADXL362_ACCEL_ODR_400 400 Hz
CONFIG_ADXL362_ACCEL_ODR_50 50 Hz
CONFIG_ADXL362_ACCEL_ODR_RUNTIME Set at runtime.
CONFIG_ADXL362_ACCEL_RANGE_2G 2G
CONFIG_ADXL362_ACCEL_RANGE_4G 4G
CONFIG_ADXL362_ACCEL_RANGE_8G 8G
CONFIG_ADXL362_ACCEL_RANGE_RUNTIME Set at runtime.
CONFIG_ADXL362_ACTIVITY_THRESHOLD Upper threshold value
CONFIG_ADXL362_INACTIVITY_THRESHOLD Lower threshold value
CONFIG_ADXL362_INTERRUPT_MODE Activity and inactivity interrupt mode
CONFIG_ADXL362_THREAD_PRIORITY Thread priority
CONFIG_ADXL362_THREAD_STACK_SIZE Thread stack size
CONFIG_ADXL362_TRIGGER  
CONFIG_ADXL362_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_ADXL362_TRIGGER_NONE No trigger
CONFIG_ADXL362_TRIGGER_OWN_THREAD Use own thread
CONFIG_ADXL372 ADXL372 Three Axis High-g I2C/SPI accelerometer
CONFIG_ADXL372_ACTIVITY_THRESHOLD Activity threshold in mg
CONFIG_ADXL372_ACTIVITY_TIME Activity time
CONFIG_ADXL372_BW_1600HZ 1600 Hz
CONFIG_ADXL372_BW_200HZ 200 Hz
CONFIG_ADXL372_BW_3200HZ 3200 Hz
CONFIG_ADXL372_BW_400HZ 400 Hz
CONFIG_ADXL372_BW_800HZ 800 Hz
CONFIG_ADXL372_HPF_CORNER0 ODR/210
CONFIG_ADXL372_HPF_CORNER1 ODR/411
CONFIG_ADXL372_HPF_CORNER2 ODR/812
CONFIG_ADXL372_HPF_CORNER3 ODR/1616
CONFIG_ADXL372_HPF_DISABLE Disabled
CONFIG_ADXL372_I2C I2C Interface
CONFIG_ADXL372_INACTIVITY_THRESHOLD In-activity threshold in mg
CONFIG_ADXL372_INACTIVITY_TIME In-activity time
CONFIG_ADXL372_LPF_DISABLE Disabled
CONFIG_ADXL372_MEASUREMENT_MODE Measurement Mode
CONFIG_ADXL372_ODR_1600HZ 1600 Hz
CONFIG_ADXL372_ODR_3200HZ 3200 Hz
CONFIG_ADXL372_ODR_400HZ 400 Hz
CONFIG_ADXL372_ODR_6400HZ 6400 Hz
CONFIG_ADXL372_ODR_800HZ 800 Hz
CONFIG_ADXL372_PEAK_DETECT_MODE Max Peak detect mode
CONFIG_ADXL372_REFERENCED_ACTIVITY_DETECTION_MODE Use referenced activity/in-activity detection
CONFIG_ADXL372_SPI SPI Interface
CONFIG_ADXL372_THREAD_PRIORITY Thread priority
CONFIG_ADXL372_THREAD_STACK_SIZE Thread stack size
CONFIG_ADXL372_TRIGGER  
CONFIG_ADXL372_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_ADXL372_TRIGGER_NONE No trigger
CONFIG_ADXL372_TRIGGER_OWN_THREAD Use own thread
CONFIG_AHB_DIV AHB clock divider
CONFIG_AK8975 AK8975 Magnetometer
CONFIG_AK8975_I2C_ADDR I2C address
CONFIG_AK8975_I2C_MASTER_DEV_NAME I2C master where AK8975 is connected
CONFIG_AK8975_NAME Driver name
CONFIG_ALTERA_AVALON_I2C  
CONFIG_ALTERA_AVALON_MSGDMA  
CONFIG_ALTERA_AVALON_PIO  
CONFIG_ALTERA_AVALON_QSPI  
CONFIG_ALTERA_AVALON_SYSID  
CONFIG_ALTERA_AVALON_TIMER Altera Avalon Interval Timer
CONFIG_AMG88XX AMG88XX Infrared Thermopile Sensor
CONFIG_AMG88XX_GPIO_DEV_NAME GPIO device
CONFIG_AMG88XX_GPIO_PIN_NUM Interrupt GPIO pin number
CONFIG_AMG88XX_I2C_ADDR I2C address for AMG88XX Sensor
CONFIG_AMG88XX_I2C_MASTER_DEV_NAME I2C master where AMG88XX is connected
CONFIG_AMG88XX_NAME Driver name
CONFIG_AMG88XX_THREAD_PRIORITY Thread priority
CONFIG_AMG88XX_THREAD_STACK_SIZE Thread stack size
CONFIG_AMG88XX_TRIGGER  
CONFIG_AMG88XX_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_AMG88XX_TRIGGER_NONE No trigger
CONFIG_AMG88XX_TRIGGER_OWN_THREAD Use own thread
CONFIG_AMS_IAQ_CORE iAQ-core Digital VOC sensor
CONFIG_AON_API_REENTRANCY AON driver API reentrancy
CONFIG_AON_COUNTER_QMSI AON counter driver
CONFIG_AON_COUNTER_QMSI_DEV_NAME QMSI AON Counter Device Name
CONFIG_AON_TIMER_IRQ_PRI Interrupt priority
CONFIG_AON_TIMER_QMSI AON periodic timer driver
CONFIG_APA102_STRIP APA102 SPI LED strip driver
CONFIG_APDS9960 APDS9960 Sensor
CONFIG_APDS9960_AGAIN_16X 16x
CONFIG_APDS9960_AGAIN_1X 1x
CONFIG_APDS9960_AGAIN_4X 4x
CONFIG_APDS9960_AGAIN_64X 64x
CONFIG_APDS9960_ENABLE_ALS Enable Ambient Light Sense
CONFIG_APDS9960_PGAIN_1X 1x
CONFIG_APDS9960_PGAIN_2X 2x
CONFIG_APDS9960_PGAIN_4X 4x
CONFIG_APDS9960_PGAIN_8X 8x
CONFIG_APDS9960_PLED_BOOST_100PCT 100%
CONFIG_APDS9960_PLED_BOOST_150PCT 150%
CONFIG_APDS9960_PLED_BOOST_200PCT 200%
CONFIG_APDS9960_PLED_BOOST_300PCT 300%
CONFIG_APDS9960_PPULSE_COUNT Proximity Pulse Count
CONFIG_APDS9960_PPULSE_LENGTH_16US 16us
CONFIG_APDS9960_PPULSE_LENGTH_32US 32us
CONFIG_APDS9960_PPULSE_LENGTH_4US 4us
CONFIG_APDS9960_PPULSE_LENGTH_8US 8us
CONFIG_APDS9960_TRIGGER  
CONFIG_APDS9960_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_APDS9960_TRIGGER_NONE No trigger
CONFIG_APIC_TIMER New local APIC timer
CONFIG_APIC_TIMER_IRQ Local APIC timer IRQ
CONFIG_APIC_TIMER_IRQ_PRIORITY Local APIC timer IRQ priority
CONFIG_APIC_TIMER_TSC Use invariant TSC for z_timer_cycle_get_32()
CONFIG_APIC_TIMER_TSC_M TSC to local APIC timer frequency divisor (M)
CONFIG_APIC_TIMER_TSC_N TSC to local APIC timer frequency multiplier (N)
CONFIG_APPLICATION_DEFINED_SYSCALL Scan application folder for any syscall definition
CONFIG_APPLICATION_INIT_PRIORITY Default init priority for application level drivers
CONFIG_APP_LINK_WITH_FS Link ‘app’ with FS
CONFIG_APP_LINK_WITH_LVGL Link ‘app’ with LVGL
CONFIG_APP_LINK_WITH_MBEDTLS Link ‘app’ with MBEDTLS
CONFIG_APP_LINK_WITH_MCUMGR Link ‘app’ with MCUMGR
CONFIG_APP_LINK_WITH_POSIX_SUBSYS Make POSIX headers available to application
CONFIG_ARC ARC architecture
CONFIG_ARCH  
CONFIG_ARCH_CACHE_FLUSH_DETECT  
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT  
CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN  
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT  
CONFIG_ARCH_HAS_NOCACHE_MEMORY_SUPPORT  
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT  
CONFIG_ARCH_HAS_STACK_PROTECTION  
CONFIG_ARCH_HAS_THREAD_ABORT  
CONFIG_ARCH_HAS_TRUSTED_EXECUTION  
CONFIG_ARCH_HAS_USERSPACE  
CONFIG_ARCH_LOG_LEVEL  
CONFIG_ARCH_LOG_LEVEL_DBG Debug
CONFIG_ARCH_LOG_LEVEL_ERR Error
CONFIG_ARCH_LOG_LEVEL_INF Info
CONFIG_ARCH_LOG_LEVEL_OFF Off
CONFIG_ARCH_LOG_LEVEL_WRN Warning
CONFIG_ARCH_POSIX POSIX (native) architecture
CONFIG_ARCH_POSIX_RECOMMENDED_STACK_SIZE  
CONFIG_ARCH_POSIX_STOP_ON_FATAL_ERROR Terminate execution on fatal errors
CONFIG_ARCH_SW_ISR_TABLE_ALIGN Alignment size of a software ISR table
CONFIG_ARCV2_INTERRUPT_UNIT ARCv2 Interrupt Unit
CONFIG_ARCV2_TIMER ARC Timer
CONFIG_ARCV2_TIMER_IRQ_PRIORITY ARC timer interrupt priority
CONFIG_ARC_CONNECT ARC has ARC connect
CONFIG_ARC_CORE_MPU ARC Core MPU functionalities
CONFIG_ARC_EXCEPTION_DEBUG Unhandled exception debugging information
CONFIG_ARC_FIRQ FIRQ enable
CONFIG_ARC_HAS_ACCL_REGS Reg Pair ACCL:ACCH (FPU and/or MPY > 6)
CONFIG_ARC_HAS_SECURE ARC has SecureShield
CONFIG_ARC_HAS_STACK_CHECKING ARC has STACK_CHECKING
CONFIG_ARC_MPU ARC MPU Support
CONFIG_ARC_MPU_ENABLE Enable MPU
CONFIG_ARC_MPU_VER ARC MPU version
CONFIG_ARC_NORMAL_FIRMWARE Generate Normal Firmware
CONFIG_ARC_SECURE_FIRMWARE Generate Secure Firmware
CONFIG_ARC_STACK_CHECKING  
CONFIG_ARC_STACK_PROTECTION  
CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS Enable unaligned access in HW
CONFIG_ARM ARM architecture
CONFIG_ARMV6_M_ARMV8_M_BASELINE  
CONFIG_ARMV7_EXCEPTION_STACK_SIZE Undefined Instruction and Abort stack size (in bytes)
CONFIG_ARMV7_FIQ_STACK_SIZE FIQ stack size (in bytes)
CONFIG_ARMV7_M_ARMV8_M_FP  
CONFIG_ARMV7_M_ARMV8_M_MAINLINE  
CONFIG_ARMV7_R  
CONFIG_ARMV7_R_FP  
CONFIG_ARMV7_SVC_STACK_SIZE SVC stack size (in bytes)
CONFIG_ARMV7_SYS_STACK_SIZE SYS stack size (in bytes)
CONFIG_ARMV8_M_BASELINE  
CONFIG_ARMV8_M_DSP  
CONFIG_ARMV8_M_MAINLINE  
CONFIG_ARMV8_M_SE  
CONFIG_ARM_CLOCK_CONTROL_DEV_NAME Clock Config Device name
CONFIG_ARM_DIV ARM clock divider
CONFIG_ARM_ENTRY_VENEERS_LIB_NAME Entry Veneers symbol file
CONFIG_ARM_FIRMWARE_HAS_SECURE_ENTRY_FUNCS Secure Firmware has Secure Entry functions
CONFIG_ARM_FIRMWARE_USES_SECURE_ENTRY_FUNCS Non-Secure Firmware uses Secure Entry functions
CONFIG_ARM_MPU ARM MPU Support
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE  
CONFIG_ARM_NONSECURE_FIRMWARE  
CONFIG_ARM_NSC_REGION_BASE_ADDRESS ARM Non-Secure Callable Region base address
CONFIG_ARM_SECURE_BUSFAULT_HARDFAULT_NMI BusFault, HardFault, and NMI target Secure state
CONFIG_ARM_SECURE_FIRMWARE  
CONFIG_ARM_STACK_PROTECTION  
CONFIG_ARM_TRUSTZONE_M ARM TrustZone-M support
CONFIG_ASAN Build with address sanitizer
CONFIG_ASF  
CONFIG_ASSERT Enable __ASSERT() macro
CONFIG_ASSERT_LEVEL __ASSERT() level
CONFIG_ATMEL_WINC1500  
CONFIG_ATOMIC_OPERATIONS_BUILTIN  
CONFIG_ATOMIC_OPERATIONS_C  
CONFIG_ATOMIC_OPERATIONS_CUSTOM  
CONFIG_AUDIO Support for Audio
CONFIG_AUDIO_CODEC Audio Codec Drivers
CONFIG_AUDIO_CODEC_INIT_PRIORITY Init priority
CONFIG_AUDIO_CODEC_LOG_LEVEL  
CONFIG_AUDIO_CODEC_LOG_LEVEL_DBG Debug
CONFIG_AUDIO_CODEC_LOG_LEVEL_ERR Error
CONFIG_AUDIO_CODEC_LOG_LEVEL_INF Info
CONFIG_AUDIO_CODEC_LOG_LEVEL_OFF Off
CONFIG_AUDIO_CODEC_LOG_LEVEL_WRN Warning
CONFIG_AUDIO_DMIC Digital Microphone (Audio) Drivers
CONFIG_AUDIO_DMIC_INIT_PRIORITY Init priority
CONFIG_AUDIO_DMIC_LOG_LEVEL  
CONFIG_AUDIO_DMIC_LOG_LEVEL_DBG Debug
CONFIG_AUDIO_DMIC_LOG_LEVEL_ERR Error
CONFIG_AUDIO_DMIC_LOG_LEVEL_INF Info
CONFIG_AUDIO_DMIC_LOG_LEVEL_OFF Off
CONFIG_AUDIO_DMIC_LOG_LEVEL_WRN Warning
CONFIG_AUDIO_INTEL_DMIC Intel digital PDM microphone driver support
CONFIG_AUDIO_MPXXDTYY ST Digital PDM microphone attached to I2S support
CONFIG_AUDIO_TLV320DAC TLV320DAC310x DAC support
CONFIG_BASE64 Enable base64 encoding and decoding
CONFIG_BATTERY_SENSE Enable the battery sense circuit
CONFIG_BIG_ENDIAN  
CONFIG_BLUETOOTH_BULK_EP_MPS  
CONFIG_BLUETOOTH_INT_EP_MPS  
CONFIG_BMA280 BMA280 Three Axis Accelerometer Family
CONFIG_BMA280_CHIP_BMA280 BMA280
CONFIG_BMA280_CHIP_BMC150_ACCEL BMC150_ACCEL
CONFIG_BMA280_GPIO_DEV_NAME GPIO device
CONFIG_BMA280_GPIO_PIN_NUM Interrupt GPIO pin number
CONFIG_BMA280_I2C_ADDR BMA280 I2C address
CONFIG_BMA280_I2C_MASTER_DEV_NAME I2C master device name
CONFIG_BMA280_NAME Driver name
CONFIG_BMA280_PMU_BW_1 7.81Hz
CONFIG_BMA280_PMU_BW_2 15.63HZ
CONFIG_BMA280_PMU_BW_3 31.25Hz
CONFIG_BMA280_PMU_BW_4 62.5Hz
CONFIG_BMA280_PMU_BW_5 125Hz
CONFIG_BMA280_PMU_BW_6 250HZ
CONFIG_BMA280_PMU_BW_7 500Hz
CONFIG_BMA280_PMU_BW_8 unfiltered
CONFIG_BMA280_PMU_RANGE_16G +/-16g
CONFIG_BMA280_PMU_RANGE_2G +/-2g
CONFIG_BMA280_PMU_RANGE_4G +/-4g
CONFIG_BMA280_PMU_RANGE_8G +/-8g
CONFIG_BMA280_THREAD_PRIORITY Thread priority
CONFIG_BMA280_THREAD_STACK_SIZE Thread stack size
CONFIG_BMA280_TRIGGER  
CONFIG_BMA280_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_BMA280_TRIGGER_NONE No trigger
CONFIG_BMA280_TRIGGER_OWN_THREAD Use own thread
CONFIG_BMC150_MAGN BMC150_MAGN I2C Magnetometer Chip
CONFIG_BMC150_MAGN_DEV_NAME BMC150_MAGN device name
CONFIG_BMC150_MAGN_GPIO_DRDY_DEV_NAME GPIO device where BMC150_MAGN data ready interrupt is connected
CONFIG_BMC150_MAGN_GPIO_DRDY_INT_PIN GPIO pin number for the data ready interrupt pin
CONFIG_BMC150_MAGN_I2C_ADDR BMC150_MAGN I2C slave address
CONFIG_BMC150_MAGN_I2C_MASTER_DEV_NAME I2C master where BMC150_MAGN is connected
CONFIG_BMC150_MAGN_PRESET_ENHANCED_REGULAR Enhanced regular (15, 27, 10)
CONFIG_BMC150_MAGN_PRESET_HIGH_ACCURACY High accuracy (47, 83, 20)
CONFIG_BMC150_MAGN_PRESET_LOW_POWER Low power (3, 3, 10)
CONFIG_BMC150_MAGN_PRESET_REGULAR Regular (9, 15, 10)
CONFIG_BMC150_MAGN_SAMPLING_RATE_RUNTIME Enable dynamic sampling rate
CONFIG_BMC150_MAGN_SAMPLING_REP_XY Enable dynamic XY oversampling
CONFIG_BMC150_MAGN_SAMPLING_REP_Z Enable dynamic Z oversampling
CONFIG_BMC150_MAGN_TRIGGER Enable triggers
CONFIG_BMC150_MAGN_TRIGGER_DRDY Enable data ready trigger
CONFIG_BMC150_MAGN_TRIGGER_THREAD_STACK Thread stack size
CONFIG_BME280 BME280/BMP280 sensor
CONFIG_BME280_FILTER_16 16
CONFIG_BME280_FILTER_2 2
CONFIG_BME280_FILTER_4 4
CONFIG_BME280_FILTER_8 8
CONFIG_BME280_FILTER_OFF filter off
CONFIG_BME280_HUMIDITY_OVER_16X x16
CONFIG_BME280_HUMIDITY_OVER_1X x1
CONFIG_BME280_HUMIDITY_OVER_2X x2
CONFIG_BME280_HUMIDITY_OVER_4X x4
CONFIG_BME280_HUMIDITY_OVER_8X x8
CONFIG_BME280_PRESS_OVER_16X x16
CONFIG_BME280_PRESS_OVER_1X x1
CONFIG_BME280_PRESS_OVER_2X x2
CONFIG_BME280_PRESS_OVER_4X x4
CONFIG_BME280_PRESS_OVER_8X x8
CONFIG_BME280_STANDBY_05MS 0.5ms
CONFIG_BME280_STANDBY_1000MS 1000ms
CONFIG_BME280_STANDBY_125MS 125ms
CONFIG_BME280_STANDBY_2000MS 2000ms BMP280 / 10ms BME280
CONFIG_BME280_STANDBY_250MS 250ms
CONFIG_BME280_STANDBY_4000MS 4000ms BMP280 / 20ms BME280
CONFIG_BME280_STANDBY_500MS 500ms
CONFIG_BME280_STANDBY_62MS 62.5ms
CONFIG_BME280_TEMP_OVER_16X x16
CONFIG_BME280_TEMP_OVER_1X x1
CONFIG_BME280_TEMP_OVER_2X x2
CONFIG_BME280_TEMP_OVER_4X x4
CONFIG_BME280_TEMP_OVER_8X x8
CONFIG_BME680 BME680 sensor
CONFIG_BME680_FILTER_128 128
CONFIG_BME680_FILTER_16 16
CONFIG_BME680_FILTER_2 2
CONFIG_BME680_FILTER_32 32
CONFIG_BME680_FILTER_4 4
CONFIG_BME680_FILTER_64 64
CONFIG_BME680_FILTER_8 8
CONFIG_BME680_FILTER_OFF filter off
CONFIG_BME680_HEATR_DUR_LP 197
CONFIG_BME680_HEATR_DUR_ULP 1943
CONFIG_BME680_HEATR_TEMP_LP 320
CONFIG_BME680_HEATR_TEMP_ULP 400
CONFIG_BME680_HUMIDITY_OVER_16X x16
CONFIG_BME680_HUMIDITY_OVER_1X x1
CONFIG_BME680_HUMIDITY_OVER_2X x2
CONFIG_BME680_HUMIDITY_OVER_4X x4
CONFIG_BME680_HUMIDITY_OVER_8X x8
CONFIG_BME680_PRESS_OVER_16X x16
CONFIG_BME680_PRESS_OVER_1X x1
CONFIG_BME680_PRESS_OVER_2X x2
CONFIG_BME680_PRESS_OVER_4X x4
CONFIG_BME680_PRESS_OVER_8X x8
CONFIG_BME680_TEMP_OVER_16X x16
CONFIG_BME680_TEMP_OVER_1X x1
CONFIG_BME680_TEMP_OVER_2X x2
CONFIG_BME680_TEMP_OVER_4X x4
CONFIG_BME680_TEMP_OVER_8X x8
CONFIG_BMG160 Bosch BMG160 gyroscope support
CONFIG_BMG160_DRV_NAME Driver’s name
CONFIG_BMG160_GPIO_PORT_NAME GPIO controller port name
CONFIG_BMG160_I2C_ADDR BMG160 I2C address
CONFIG_BMG160_I2C_PORT_NAME I2C master controller port name
CONFIG_BMG160_I2C_SPEED_FAST Fast
CONFIG_BMG160_I2C_SPEED_STANDARD Standard
CONFIG_BMG160_INT_PIN BMG160 INT PIN
CONFIG_BMG160_ODR_100 100 Hz
CONFIG_BMG160_ODR_1000 1000 Hz
CONFIG_BMG160_ODR_200 200 Hz
CONFIG_BMG160_ODR_2000 2000 Hz
CONFIG_BMG160_ODR_400 400 Hz
CONFIG_BMG160_ODR_RUNTIME Set at runtime.
CONFIG_BMG160_RANGE_1000DPS 1000 DPS
CONFIG_BMG160_RANGE_125DPS 125 DPS
CONFIG_BMG160_RANGE_2000DPS 2000 DPS
CONFIG_BMG160_RANGE_250DPS 250 DPS
CONFIG_BMG160_RANGE_500DPS 500 DPS
CONFIG_BMG160_RANGE_RUNTIME Set at runtime.
CONFIG_BMG160_THREAD_PRIORITY Own thread priority
CONFIG_BMG160_THREAD_STACK_SIZE Own thread stack size
CONFIG_BMG160_TRIGGER  
CONFIG_BMG160_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_BMG160_TRIGGER_NONE No trigger
CONFIG_BMG160_TRIGGER_OWN_THREAD Use own thread
CONFIG_BMI160 Bosch BMI160 inertial measurement unit
CONFIG_BMI160_ACCEL_ODR_100 100 Hz
CONFIG_BMI160_ACCEL_ODR_1600 1600 Hz
CONFIG_BMI160_ACCEL_ODR_200 200 Hz
CONFIG_BMI160_ACCEL_ODR_25 25 Hz
CONFIG_BMI160_ACCEL_ODR_25_16 1.56 Hz
CONFIG_BMI160_ACCEL_ODR_25_2 12.5 Hz
CONFIG_BMI160_ACCEL_ODR_25_32 0.78 Hz
CONFIG_BMI160_ACCEL_ODR_25_4 6.25 Hz
CONFIG_BMI160_ACCEL_ODR_25_8 3.125 Hz
CONFIG_BMI160_ACCEL_ODR_400 400 Hz
CONFIG_BMI160_ACCEL_ODR_50 50 Hz
CONFIG_BMI160_ACCEL_ODR_800 800 Hz
CONFIG_BMI160_ACCEL_ODR_RUNTIME Set at runtime.
CONFIG_BMI160_ACCEL_PMU_LOW_POWER low power
CONFIG_BMI160_ACCEL_PMU_NORMAL normal
CONFIG_BMI160_ACCEL_PMU_RUNTIME Set at runtime.
CONFIG_BMI160_ACCEL_PMU_SUSPEND suspended/not used
CONFIG_BMI160_ACCEL_RANGE_16G 16G
CONFIG_BMI160_ACCEL_RANGE_2G 2G
CONFIG_BMI160_ACCEL_RANGE_4G 4G
CONFIG_BMI160_ACCEL_RANGE_8G 8G
CONFIG_BMI160_ACCEL_RANGE_RUNTIME Set at runtime.
CONFIG_BMI160_GYRO_ODR_100 100 Hz
CONFIG_BMI160_GYRO_ODR_1600 1600 Hz
CONFIG_BMI160_GYRO_ODR_200 200 Hz
CONFIG_BMI160_GYRO_ODR_25 25 Hz
CONFIG_BMI160_GYRO_ODR_3200 3200 Hz
CONFIG_BMI160_GYRO_ODR_400 400 Hz
CONFIG_BMI160_GYRO_ODR_50 50 Hz
CONFIG_BMI160_GYRO_ODR_800 800 Hz
CONFIG_BMI160_GYRO_ODR_RUNTIME Set at runtime.
CONFIG_BMI160_GYRO_PMU_FAST_STARTUP fast start-up
CONFIG_BMI160_GYRO_PMU_NORMAL normal
CONFIG_BMI160_GYRO_PMU_RUNTIME Set at runtime.
CONFIG_BMI160_GYRO_PMU_SUSPEND suspended/not used
CONFIG_BMI160_GYRO_RANGE_1000DPS 1000 DPS
CONFIG_BMI160_GYRO_RANGE_125DPS 125 DPS
CONFIG_BMI160_GYRO_RANGE_2000DPS 2000 DPS
CONFIG_BMI160_GYRO_RANGE_250DPS 250 DPS
CONFIG_BMI160_GYRO_RANGE_500DPS 500 DPS
CONFIG_BMI160_GYRO_RANGE_RUNTIME Set at runtime.
CONFIG_BMI160_THREAD_PRIORITY Own thread priority
CONFIG_BMI160_THREAD_STACK_SIZE Own thread stack size
CONFIG_BMI160_TRIGGER  
CONFIG_BMI160_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_BMI160_TRIGGER_NONE No trigger
CONFIG_BMI160_TRIGGER_OWN_THREAD Use own thread
CONFIG_BMM150 BMM150 I2C Geomagnetic Chip
CONFIG_BMM150_DEV_NAME BMM150 device name
CONFIG_BMM150_I2C_ADDR BMM150 I2C slave address
CONFIG_BMM150_I2C_MASTER_DEV_NAME I2C master where BMM150 is connected
CONFIG_BMM150_PRESET_ENHANCED_REGULAR Enhanced regular (15, 27, 10)
CONFIG_BMM150_PRESET_HIGH_ACCURACY High accuracy (47, 83, 20)
CONFIG_BMM150_PRESET_LOW_POWER Low power (3, 3, 10)
CONFIG_BMM150_PRESET_REGULAR Regular (9, 15, 10)
CONFIG_BMM150_SAMPLING_RATE_RUNTIME Enable dynamic sampling rate
CONFIG_BMM150_SAMPLING_REP_XY Enable dynamic XY oversampling
CONFIG_BMM150_SAMPLING_REP_Z Enable dynamic Z oversampling
CONFIG_BOARD  
CONFIG_BOARD_96B_ARGONKEY 96Boards Argonkey
CONFIG_BOARD_96B_AVENGER96 96Boards Avenger96 Board
CONFIG_BOARD_96B_CARBON 96Boards Carbon (STM32F401)
CONFIG_BOARD_96B_CARBON_NRF51 96Boards Carbon (nRF51)
CONFIG_BOARD_96B_MEERKAT96 96Boards Meerkat96 board
CONFIG_BOARD_96B_NEONKEY 96Boards Neonkey
CONFIG_BOARD_96B_NITROGEN 96Boards Nitrogen
CONFIG_BOARD_96B_STM32_SENSOR_MEZ 96Boards STM32 Sensor Mezzanine Board
CONFIG_BOARD_96B_WISTRIO 96boards WisTrio Development Board
CONFIG_BOARD_ACRN ACRN User OS
CONFIG_BOARD_ADAFRUIT_FEATHER_M0_BASIC_PROTO Adafruit Feather M0 Basic Proto
CONFIG_BOARD_ADAFRUIT_TRINKET_M0 Adafruit Trinket M0
CONFIG_BOARD_ALTERA_MAX10 Altera MAX10 Board
CONFIG_BOARD_ARDUINO_DUE Arduino Due Board
CONFIG_BOARD_ARDUINO_ZERO Arduino Zero
CONFIG_BOARD_ATSAMD20_XPRO SAM D20 Xplained Pro
CONFIG_BOARD_ATSAMD21_XPRO SAM D21 Xplained Pro
CONFIG_BOARD_ATSAMR21_XPRO SAM R21 Xplained Pro
CONFIG_BOARD_BBC_MICROBIT BBC MICRO:BIT
CONFIG_BOARD_BL652_DVK BL652 DVK
CONFIG_BOARD_BL654_DVK BL654 DVK
CONFIG_BOARD_B_L072Z_LRWAN1 STMicroelectronics B-L072Z-LRWAN1 Discovery kit
CONFIG_BOARD_CC1352R1_LAUNCHXL TI CC1352R1 LaunchXL
CONFIG_BOARD_CC2650_SENSORTAG TI CC2650 SensorTag
CONFIG_BOARD_CC26X2R1_LAUNCHXL TI CC26x2R1 LaunchXL
CONFIG_BOARD_CC3220SF_LAUNCHXL TI CC3220SF LAUNCHXL
CONFIG_BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY CCS_VDD power rail init priority
CONFIG_BOARD_COLIBRI_IMX7D_M4 Toradex Colibri iMX7 Dual
CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M0 PSoC6 WiFi-BT Pioneer Kit M0
CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M4 PSoC6 WiFi-BT Pioneer Kit M4
CONFIG_BOARD_DEPRECATED  
CONFIG_BOARD_DISCO_L475_IOT1 Discovery IoT L475 Development Board
CONFIG_BOARD_DRAGINO_LSN50 Dragino LSN50 Sensor Node
CONFIG_BOARD_EFM32HG_SLSTK3400A SiLabs EFM32HG-SLSTK3400A (Happy Gecko)
CONFIG_BOARD_EFM32PG_STK3402A SiLabs EFM32PG-STK3402A (Pearl Gecko)
CONFIG_BOARD_EFM32WG_STK3800 SiLabs EFM32WG-STK3800 (Wonder Gecko)
CONFIG_BOARD_EFR32MG_SLTB004A SiLabs EFR32MG-SLTB004A (Thunderboard Sense 2)
CONFIG_BOARD_EFR32_SLWSTK6061A SiLabs EFR32-SLWSTK6061A (Flex Gecko)
CONFIG_BOARD_EMSDP EM Software Development Platform
CONFIG_BOARD_EM_STARTERKIT ARC EM Starter Kit
CONFIG_BOARD_EM_STARTERKIT_R22 2.2
CONFIG_BOARD_EM_STARTERKIT_R23 2.3
CONFIG_BOARD_ENABLE_DCDC Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode / Enable DCDC mode
CONFIG_BOARD_ESP32 ESP32 Development Board
CONFIG_BOARD_FRDM_K64F Freescale FRDM-K64F
CONFIG_BOARD_FRDM_KL25Z NXP FRDM-KL25Z
CONFIG_BOARD_FRDM_KW41Z NXP FRDM-KW41Z
CONFIG_BOARD_GPMRB Gordon Peak MRB
CONFIG_BOARD_HAS_NRF5_BOOTLOADER Board has nRF5 bootloader
CONFIG_BOARD_HEXIWEAR_K64 NXP Hexiwear K64
CONFIG_BOARD_HEXIWEAR_KW40Z Hexiwear KW40Z
CONFIG_BOARD_HIFIVE1 HiFive1 target
CONFIG_BOARD_HIFIVE1_REVB HiFive1 Rev B target
CONFIG_BOARD_HOLYIOT_YJ16019 Holyiot YJ-16019
CONFIG_BOARD_HSDK ARC HS Development Kit
CONFIG_BOARD_INIT_PRIORITY  
CONFIG_BOARD_INTEL_S1000_CRB Xtensa on Intel_S1000
CONFIG_BOARD_IOTDK ARC IoT Development Kit
CONFIG_BOARD_LITEX_VEXRISCV Board with LiteX/VexRiscV CPU
CONFIG_BOARD_LPCXPRESSO54114_M0 NXP LPCXPRESSO-54114 M0
CONFIG_BOARD_LPCXPRESSO54114_M4 NXP LPCXPRESSO-54114 M4
CONFIG_BOARD_LPCXPRESSO55S69_CPU0 NXP LPCXPRESSO-55S69 [CPU0]
CONFIG_BOARD_LPCXPRESSO55S69_CPU1 NXP LPCXPRESSO-55S69 [CPU1]
CONFIG_BOARD_M2GL025_MIV Microsemi M2GL025 IGLOO2 dev board with Mi-V CPU
CONFIG_BOARD_MEC15XXEVB_ASSY6853 Microchip MEC15XX EVB ASSY 6853 Development board
CONFIG_BOARD_MEC2016EVB_ASSY6797 Microchip MEC2016 EVB ASSY 6797 Development board
CONFIG_BOARD_MIKROE_MINI_M4_FOR_STM32 Mikroe MINI-M4 for STM32 Board
CONFIG_BOARD_MIMXRT1015_EVK NXP MIMXRT1015-EVK
CONFIG_BOARD_MIMXRT1020_EVK NXP MIMXRT1020-EVK
CONFIG_BOARD_MIMXRT1050_EVK NXP MIMXRT1050-EVK
CONFIG_BOARD_MIMXRT1050_EVK_QSPI NXP MIMXRT1050-EVK-QSPI
CONFIG_BOARD_MIMXRT1060_EVK NXP MIMXRT1060-EVK
CONFIG_BOARD_MIMXRT1060_EVK_HYPERFLASH NXP MIMXRT1060-EVK-HYPERFLASH
CONFIG_BOARD_MIMXRT1064_EVK NXP MIMXRT1064-EVK
CONFIG_BOARD_MINNOWBOARD MinnowBoard Max
CONFIG_BOARD_MPS2_AN385 ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385)
CONFIG_BOARD_MPS2_AN521 ARM Cortex-M33 SMM on V2M-MPS2 (AN521)
CONFIG_BOARD_MSP_EXP432P401R_LAUNCHXL TI MSP-EXP432P401R LAUNCHXL
CONFIG_BOARD_MUSCA_A ARM Cortex-M33 SMM on V2M-MUSCA
CONFIG_BOARD_MUSCA_B1 ARM Cortex-M33 SMM on V2M-MUSCA
CONFIG_BOARD_NATIVE_POSIX  
CONFIG_BOARD_NATIVE_POSIX_32BIT Native POSIX for 32-bit host
CONFIG_BOARD_NATIVE_POSIX_64BIT Native POSIX for 64-bit host
CONFIG_BOARD_NRF51_BLE400 nRF51 BLE400
CONFIG_BOARD_NRF51_BLENANO nRF51 BLENANO
CONFIG_BOARD_NRF51_PCA10028 nRF51 PCA10028
CONFIG_BOARD_NRF51_PCA10031 nRF51 PCA10031
CONFIG_BOARD_NRF51_VBLUNO51 nRF51 VBLUno51 BLE
CONFIG_BOARD_NRF52810_PCA10040 nRF52810 PCA10040
CONFIG_BOARD_NRF52811_PCA10056 nRF52811 PCA10056
CONFIG_BOARD_NRF52832_MDK nRF52832-MDK
CONFIG_BOARD_NRF52840_BLIP Electronut Labs Blip
CONFIG_BOARD_NRF52840_GPIO_RESET Use nRF52840 PCA10090 GPIO reset pin
CONFIG_BOARD_NRF52840_GPIO_RESET_PIN Reset pin
CONFIG_BOARD_NRF52840_MDK NRF52840-MDK
CONFIG_BOARD_NRF52840_PAPYR NRF52840 PAPYR
CONFIG_BOARD_NRF52840_PCA10056 NRF52840 PCA10056
CONFIG_BOARD_NRF52840_PCA10059 NRF52840 PCA10059
CONFIG_BOARD_NRF52840_PCA10090 NRF52840 PCA10090
CONFIG_BOARD_NRF52_ADAFRUIT_FEATHER nRF52 ADAFRUIT FEATHER
CONFIG_BOARD_NRF52_BLENANO2 nRF52 BLENANO2
CONFIG_BOARD_NRF52_BSIM NRF52 simulation model
CONFIG_BOARD_NRF52_PCA10040 nRF52 PCA10040
CONFIG_BOARD_NRF52_PCA20020 nRF52 PCA20020
CONFIG_BOARD_NRF52_SPARKFUN nRF52 SPARKFUN
CONFIG_BOARD_NRF52_VBLUNO52 nRF52 VBLUno52
CONFIG_BOARD_NRF9160_PCA10090 nRF9160 PCA10090
CONFIG_BOARD_NRF9160_PCA10090NS nRF9160 PCA10090 non-secure
CONFIG_BOARD_NSIM ARC nSIM simulator
CONFIG_BOARD_NUCLEO_F030R8 NUCLEO-64 F030R8 Development Board
CONFIG_BOARD_NUCLEO_F070RB NUCLEO-64 F070RB Development Board
CONFIG_BOARD_NUCLEO_F091RC NUCLEO-64 F091RC Development Board
CONFIG_BOARD_NUCLEO_F103RB NUCLEO-64 F103RB Development Board
CONFIG_BOARD_NUCLEO_F207ZG NUCLEO-144 F207ZG Development Board
CONFIG_BOARD_NUCLEO_F302R8 NUCLEO-64 F302R8 Development Board
CONFIG_BOARD_NUCLEO_F334R8 NUCLEO-64 F334R8 Development Board
CONFIG_BOARD_NUCLEO_F401RE NUCLEO-64 F401RE Development Board
CONFIG_BOARD_NUCLEO_F411RE NUCLEO-64 F411RE Development Board
CONFIG_BOARD_NUCLEO_F412ZG NUCLEO-144 F412ZG Development Board
CONFIG_BOARD_NUCLEO_F413ZH NUCLEO-144 F413ZH Development Board
CONFIG_BOARD_NUCLEO_F429ZI NUCLEO-144 F429ZI Development Board
CONFIG_BOARD_NUCLEO_F446RE Nucleo F446RE Development Board
CONFIG_BOARD_NUCLEO_F746ZG Nucleo F746ZG Development Board
CONFIG_BOARD_NUCLEO_F756ZG Nucleo F756ZG Development Board
CONFIG_BOARD_NUCLEO_G071RB NUCLEO-64 G071RB Development Board
CONFIG_BOARD_NUCLEO_L053R8 NUCLEO-64 L053R8 Development Board
CONFIG_BOARD_NUCLEO_L073RZ NUCLEO-64 L073RZ Development Board
CONFIG_BOARD_NUCLEO_L432KC Nucleo L432KC Development Board
CONFIG_BOARD_NUCLEO_L476RG Nucleo L476RG Development Board
CONFIG_BOARD_NUCLEO_L496ZG Nucleo L496ZG Development Board
CONFIG_BOARD_NUCLEO_L4R5ZI Nucleo L4R5ZI Development Board
CONFIG_BOARD_NUCLEO_WB55RG Nucleo WB55RG Development Board
CONFIG_BOARD_OLIMEXINO_STM32 OLIMEXINO-STM32 Development Board
CONFIG_BOARD_OLIMEX_STM32_E407 OLIMEX-STM32-E407 Development Board
CONFIG_BOARD_OLIMEX_STM32_H407 OLIMEX-STM32-H407 Development Board
CONFIG_BOARD_OLIMEX_STM32_P405 OLIMEX-STM32-P405 Development Board
CONFIG_BOARD_PARTICLE_ARGON Particle Argon Board
CONFIG_BOARD_PARTICLE_BORON Particle Boron Board
CONFIG_BOARD_PARTICLE_XENON Particle Xenon Board
CONFIG_BOARD_PCA10090_BUTTON0_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_BUTTON0_PHY Route to buttons on the kit
CONFIG_BOARD_PCA10090_BUTTON1_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_BUTTON1_PHY Route to buttons on the kit
CONFIG_BOARD_PCA10090_INTERFACE0_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_INTERFACE0_MCU Route to nRF52840
CONFIG_BOARD_PCA10090_INTERFACE1_MCU Route to nRF52840
CONFIG_BOARD_PCA10090_INTERFACE1_TRACE Route to TRACE interface
CONFIG_BOARD_PCA10090_INTERFACE2_COEX Route to COEX interface
CONFIG_BOARD_PCA10090_INTERFACE2_MCU Route to nRF52840
CONFIG_BOARD_PCA10090_LED0_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_LED0_PHY Route to LED on the kit
CONFIG_BOARD_PCA10090_LED1_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_LED1_PHY Route to LED on the kit
CONFIG_BOARD_PCA10090_LED2_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_LED2_PHY Route to LED on the kit
CONFIG_BOARD_PCA10090_LED3_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_LED3_PHY Route to LED on the kit
CONFIG_BOARD_PCA10090_LOG_LEVEL  
CONFIG_BOARD_PCA10090_LOG_LEVEL_DBG Debug
CONFIG_BOARD_PCA10090_LOG_LEVEL_ERR Error
CONFIG_BOARD_PCA10090_LOG_LEVEL_INF Info
CONFIG_BOARD_PCA10090_LOG_LEVEL_OFF Off
CONFIG_BOARD_PCA10090_LOG_LEVEL_WRN Warning
CONFIG_BOARD_PCA10090_NRF52840_RESET Enable GPIO reset line
CONFIG_BOARD_PCA10090_NRF52840_RESET_P0_15 P0.15
CONFIG_BOARD_PCA10090_NRF52840_RESET_P0_17 P0.17
CONFIG_BOARD_PCA10090_NRF52840_RESET_P0_20 P0.20
CONFIG_BOARD_PCA10090_NRF52840_RESET_P0_22 P0.22
CONFIG_BOARD_PCA10090_NRF52840_RESET_P1_02 P1.02
CONFIG_BOARD_PCA10090_NRF52840_RESET_P1_04 P1.04
CONFIG_BOARD_PCA10090_SWITCH0_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_SWITCH0_PHY Route to switches on the kit
CONFIG_BOARD_PCA10090_SWITCH1_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_SWITCH1_PHY Route to switches on the kit
CONFIG_BOARD_PCA10090_UART0_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_UART0_VCOM Route to VCOM0
CONFIG_BOARD_PCA10090_UART1_ARDUINO Route to Arduino pins
CONFIG_BOARD_PCA10090_UART1_VCOM Route to VCOM2
CONFIG_BOARD_QEMU_CORTEX_M3 Cortex-M3 Emulation (QEMU)
CONFIG_BOARD_QEMU_CORTEX_R5 Cortex-R5 Emulation (QEMU)
CONFIG_BOARD_QEMU_NIOS2 QEMU NIOS II target
CONFIG_BOARD_QEMU_RISCV32 QEMU RISCV32 target
CONFIG_BOARD_QEMU_RISCV64 QEMU RISCV64 target
CONFIG_BOARD_QEMU_X86 QEMU x86
CONFIG_BOARD_QEMU_X86_64 QEMU x86_64
CONFIG_BOARD_QEMU_X86_IAMCU QEMU x86 (IAMCU ABI)
CONFIG_BOARD_QEMU_XTENSA Xtensa emulation using QEMU
CONFIG_BOARD_REEL_BOARD reel Board
CONFIG_BOARD_RV32M1_VEGA RV32M1 RISC-V cores
CONFIG_BOARD_SAM4S_XPLAINED Atmel SAM4S Xplained
CONFIG_BOARD_SAM_E70_XPLAINED Atmel SMART SAM E70 Xplained Board
CONFIG_BOARD_STM3210C_EVAL STM3210C-EVAL Evaluation Board
CONFIG_BOARD_STM32373C_EVAL STM32373C_EVAL Evaluation Board
CONFIG_BOARD_STM32F072B_DISCO STM32F072B-DISCO Development Board
CONFIG_BOARD_STM32F072_EVAL STM32F072-EVAL Development Board
CONFIG_BOARD_STM32F0_DISCO STM32F0DISCOVERY Development Board
CONFIG_BOARD_STM32F3_DISCO STM32F3DISCOVERY Development Board
CONFIG_BOARD_STM32F411E_DISCO STM32F411E-DISCO Development Board
CONFIG_BOARD_STM32F412G_DISCO STM32F412G-DISCO Development Board
CONFIG_BOARD_STM32F429I_DISC1 STM32F429I-DISC1 Development Board
CONFIG_BOARD_STM32F469I_DISCO STM32F469I-DISCO Development Board
CONFIG_BOARD_STM32F4_DISCO STM32F4DISCOVERY Development Board
CONFIG_BOARD_STM32F723E_DISCO STM32F723E Discovery Development Board
CONFIG_BOARD_STM32F746G_DISCO STM32F746G Discovery Development Board
CONFIG_BOARD_STM32F769I_DISCO STM32F769I Discovery Development Board
CONFIG_BOARD_STM32H747I_DISCO_M4 STM32H747I Discovery Development Board
CONFIG_BOARD_STM32H747I_DISCO_M7 STM32H747I Discovery Development Board
CONFIG_BOARD_STM32L476G_DISCO STM32L476G Discovery Development Board
CONFIG_BOARD_STM32L496G_DISCO STM32L496G Discovery Development Board
CONFIG_BOARD_STM32MP157C_DK2 STM32MP157C Discovery Development 2 Board
CONFIG_BOARD_STM32_MIN_DEV_BLACK STM32 Minimum Development Board (Black)
CONFIG_BOARD_STM32_MIN_DEV_BLUE STM32 Minimum Development Board (Blue)
CONFIG_BOARD_TWR_KE18F NXP TWR-KE18F
CONFIG_BOARD_TWR_KE18F_FLEXIO_CLKOUT Enable CLKOUT signal on FlexIO header
CONFIG_BOARD_TWR_KE18F_SPI_0_PCS2 Use PTE6 as dedicated SPI_0 PCS2 chip select
CONFIG_BOARD_TWR_KE18F_SPI_1_PCS0 Use PTD3 as dedicated SPI_1 PCS0 chip select
CONFIG_BOARD_TWR_KE18F_SPI_1_PCS2 Use PTA16 as dedicated SPI_1 PCS2 chip select
CONFIG_BOARD_UDOO_NEO_FULL_M4 UDOO Neo Full
CONFIG_BOARD_UP_SQUARED UP Squared
CONFIG_BOARD_UP_SQUARED_ATOM Atom E3940
CONFIG_BOARD_UP_SQUARED_CELERON Celeron N3350
CONFIG_BOARD_UP_SQUARED_PENTIUM Pentium N4200
CONFIG_BOARD_USB_KW24D512 NXP USB-KW24D512
CONFIG_BOARD_V2M_BEETLE ARM V2M Beetle Board
CONFIG_BOARD_VDD_PWR_CTRL_INIT_PRIORITY VDD power rail init priority
CONFIG_BOARD_WARP7_M4 WaRP7 iMX7 Solo
CONFIG_BOARD_XT_SIM Xtensa Development ISS
CONFIG_BOOTLOADER_CONTEXT_RESTORE Boot loader has context restore support
CONFIG_BOOTLOADER_CONTEXT_RESTORE_SUPPORTED  
CONFIG_BOOTLOADER_ESP_IDF ESP-IDF bootloader support
CONFIG_BOOTLOADER_KEXEC Boot using Linux kexec() system call
CONFIG_BOOTLOADER_MCUBOOT MCUboot bootloader support
CONFIG_BOOTLOADER_SRAM_SIZE SRAM reserved for bootloader
CONFIG_BOOT_BANNER Boot banner
CONFIG_BOOT_DELAY Boot delay in milliseconds
CONFIG_BOOT_FLEXSPI_NAND FlexSPI serial NAND
CONFIG_BOOT_FLEXSPI_NOR FlexSPI serial NOR
CONFIG_BOOT_SEMC_NAND SEMC parallel NAND
CONFIG_BOOT_SEMC_NOR SEMC parallel NOR
CONFIG_BOOT_TIME_MEASUREMENT Boot time measurements [EXPERIMENTAL]
CONFIG_BOUNDS_CHECK_BYPASS_MITIGATION Enable bounds check bypass mitigations for speculative execution
CONFIG_BT Bluetooth
CONFIG_BT_A2DP Bluetooth A2DP Profile [EXPERIMENTAL]
CONFIG_BT_ACL_RX_COUNT Number of incoming ACL data buffers
CONFIG_BT_ADV_SET LE Advertising Extensions Sets
CONFIG_BT_ATT_ENFORCE_FLOW Enforce strict flow control semantics for incoming PDUs
CONFIG_BT_ATT_PREPARE_COUNT Number of ATT prepare write buffers
CONFIG_BT_ATT_TX_MAX Maximum number of queued outgoing ATT PDUs
CONFIG_BT_AUTO_PHY_UPDATE Auto-initiate PHY Update Procedure
CONFIG_BT_AVDTP Bluetooth AVDTP protocol support [EXPERIMENTAL]
CONFIG_BT_BACKGROUND_SCAN_INTERVAL Scan interval used for background scanning in 0.625 ms units
CONFIG_BT_BACKGROUND_SCAN_WINDOW Scan window used for background scanning in 0.625 ms units
CONFIG_BT_BLUENRG_ACI Enable ACI message with with BlueNRG-based devices
CONFIG_BT_BONDABLE Bondable Mode
CONFIG_BT_BREDR Bluetooth BR/EDR support [EXPERIMENTAL]
CONFIG_BT_BROADCASTER Broadcaster Role support
CONFIG_BT_CENTRAL Central Role support
CONFIG_BT_CONN  
CONFIG_BT_CONN_TX_MAX Maximum number of pending TX buffers
CONFIG_BT_CREATE_CONN_TIMEOUT Timeout for pending LE Create Connection command in seconds
CONFIG_BT_CTLR Bluetooth Controller
CONFIG_BT_CTLR_ADVANCED_FEATURES Show advanced features
CONFIG_BT_CTLR_ADV_EXT LE Advertising Extensions
CONFIG_BT_CTLR_ADV_INDICATION Advertisement indications
CONFIG_BT_CTLR_ASSERT_HANDLER Application Defined Assertion Handler
CONFIG_BT_CTLR_CHAN_SEL_2 Channel Selection Algorithm #2
CONFIG_BT_CTLR_COMPANY_ID Company Id
CONFIG_BT_CTLR_CONN_PARAM_REQ Connection Parameter Request
CONFIG_BT_CTLR_CONN_RSSI Connection RSSI
CONFIG_BT_CTLR_CRYPTO Enable crypto functions in Controller
CONFIG_BT_CTLR_DATA_LENGTH  
CONFIG_BT_CTLR_DATA_LENGTH_CLEAR Data Length Support (Cleartext only)
CONFIG_BT_CTLR_DATA_LENGTH_MAX Maximum data length supported
CONFIG_BT_CTLR_DEBUG_PINS Bluetooth Controller Debug Pins
CONFIG_BT_CTLR_DTM  
CONFIG_BT_CTLR_DTM_HCI Direct Test Mode over HCI
CONFIG_BT_CTLR_DUP_FILTER_LEN Number of addresses in the scan duplicate filter
CONFIG_BT_CTLR_EXT_REJ_IND Extended Reject Indication
CONFIG_BT_CTLR_EXT_SCAN_FP LE Extended Scanner Filter Policies
CONFIG_BT_CTLR_FAST_ENC Fast Encryption Setup
CONFIG_BT_CTLR_FILTER Device Whitelist Support
CONFIG_BT_CTLR_GPIO_LNA Low Noise Amplifier GPIO interface
CONFIG_BT_CTLR_GPIO_LNA_OFFSET Time from LNA ON to Rx ready
CONFIG_BT_CTLR_GPIO_LNA_PIN Low Noise Amplifier GPIO pin number
CONFIG_BT_CTLR_GPIO_LNA_POL_INV Inverted polarity for the LNA pin
CONFIG_BT_CTLR_GPIO_PA Power Amplifier GPIO interface
CONFIG_BT_CTLR_GPIO_PA_OFFSET Time from PA ON to Tx ready
CONFIG_BT_CTLR_GPIO_PA_PIN Power Amplifier GPIO pin number
CONFIG_BT_CTLR_GPIO_PA_POL_INV Inverted polarity for the PA pin
CONFIG_BT_CTLR_HCI_VS_BUILD_INFO Zephyr HCI VS Build Info string
CONFIG_BT_CTLR_JOB_PRIO Ticker’s JOB IRQ priority
CONFIG_BT_CTLR_LE_ENC LE Encryption
CONFIG_BT_CTLR_LE_PING LE Ping
CONFIG_BT_CTLR_LLID_DATA_START_EMPTY Handle zero length L2CAP start frame
CONFIG_BT_CTLR_LLL_PRIO Lower Link Layer (Radio) IRQ priority
CONFIG_BT_CTLR_LOWEST_PRIO Link Layer Lowest IRQ priority
CONFIG_BT_CTLR_LOW_LAT Low latency non-negotiating event preemption
CONFIG_BT_CTLR_LOW_LAT_ULL Low latency ULL
CONFIG_BT_CTLR_MESH_SCAN_FILTERS Number of Mesh scan filters
CONFIG_BT_CTLR_MESH_SF_PATTERNS Number of Mesh scan filter patterns
CONFIG_BT_CTLR_MIN_USED_CHAN Minimum Number of Used Channels
CONFIG_BT_CTLR_PA_LNA_GPIOTE_CHAN  
CONFIG_BT_CTLR_PHY  
CONFIG_BT_CTLR_PHY_2M 2Mbps PHY Support
CONFIG_BT_CTLR_PHY_2M_NRF 2Mbps Nordic Semiconductor PHY Support (Cleartext only)
CONFIG_BT_CTLR_PHY_CODED Coded PHY Support
CONFIG_BT_CTLR_PRIVACY LE Controller-based Privacy
CONFIG_BT_CTLR_PROFILE_ISR Profile radio ISR
CONFIG_BT_CTLR_RADIO_ENABLE_FAST Use tTXEN/RXEN,FAST ramp-up
CONFIG_BT_CTLR_RL_SIZE LE Controller-based Privacy Resolving List size
CONFIG_BT_CTLR_RX_BUFFERS Number of Rx buffers
CONFIG_BT_CTLR_RX_ENQUEUE_HOLD Procedure Complete after on-air instant
CONFIG_BT_CTLR_RX_PRIO  
CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE High priority Rx thread stack size
CONFIG_BT_CTLR_SCAN_INDICATION Scanner indications
CONFIG_BT_CTLR_SCAN_REQ_NOTIFY Scan Request Notifications
CONFIG_BT_CTLR_SCAN_REQ_RSSI Measure Scan Request RSSI
CONFIG_BT_CTLR_SCHED_ADVANCED Advanced scheduling
CONFIG_BT_CTLR_SETTINGS Settings System
CONFIG_BT_CTLR_SLAVE_FEAT_REQ Slave-initiated Features Exchange
CONFIG_BT_CTLR_SUBVERSION_NUMBER Subversion Number
CONFIG_BT_CTLR_SW_SWITCH_SINGLE_TIMER Single TIMER tIFS Trx SW switching
CONFIG_BT_CTLR_TIFS_HW H/w Accelerated tIFS Trx switching
CONFIG_BT_CTLR_TO_HOST_UART_DEV_NAME Device Name of UART Device to an external Bluetooth Host
CONFIG_BT_CTLR_TX_BUFFERS Number of Tx buffers
CONFIG_BT_CTLR_TX_BUFFER_SIZE Tx buffer size
CONFIG_BT_CTLR_TX_PWR_0 0 dBm
CONFIG_BT_CTLR_TX_PWR_MINUS_12 -12 dBm
CONFIG_BT_CTLR_TX_PWR_MINUS_16 -16 dBm
CONFIG_BT_CTLR_TX_PWR_MINUS_20 -20 dBm
CONFIG_BT_CTLR_TX_PWR_MINUS_30 -30 dBm
CONFIG_BT_CTLR_TX_PWR_MINUS_4 -4 dBm
CONFIG_BT_CTLR_TX_PWR_MINUS_40 -40 dBm
CONFIG_BT_CTLR_TX_PWR_MINUS_8 -8 dBm
CONFIG_BT_CTLR_TX_PWR_PLUS_2 +2 dBm
CONFIG_BT_CTLR_TX_PWR_PLUS_3 +3 dBm
CONFIG_BT_CTLR_TX_PWR_PLUS_4 +4 dBm
CONFIG_BT_CTLR_TX_PWR_PLUS_5 +5 dBm
CONFIG_BT_CTLR_TX_PWR_PLUS_6 +6 dBm
CONFIG_BT_CTLR_TX_PWR_PLUS_7 +7 dBm
CONFIG_BT_CTLR_TX_PWR_PLUS_8 +8 dBm
CONFIG_BT_CTLR_TX_RETRY_DISABLE Disable Tx Retry
CONFIG_BT_CTLR_ULL_HIGH_PRIO Upper Link Layer High IRQ priority
CONFIG_BT_CTLR_ULL_LOW_PRIO Upper Link Layer Low IRQ priority
CONFIG_BT_CTLR_USER_EVT_RANGE Range of event constants reserved for proprietary event types
CONFIG_BT_CTLR_USER_EXT Enable proprietary extensions in Controller
CONFIG_BT_CTLR_VERSION_SETTINGS Version Settings
CONFIG_BT_CTLR_WORKER_PRIO Radio and Ticker’s Worker IRQ priority
CONFIG_BT_CTLR_XTAL_ADVANCED Advanced event preparation
CONFIG_BT_CTLR_XTAL_THRESHOLD Crystal shutdown threshold in uS
CONFIG_BT_CUSTOM Custom
CONFIG_BT_DATA_LEN_UPDATE Data Length Update
CONFIG_BT_DEBUG  
CONFIG_BT_DEBUG_A2DP Bluetooth A2DP debug
CONFIG_BT_DEBUG_ATT Bluetooth Attribute Protocol (ATT) debug
CONFIG_BT_DEBUG_AVDTP Bluetooth AVDTP debug
CONFIG_BT_DEBUG_CONN Bluetooth connection debug
CONFIG_BT_DEBUG_GATT Bluetooth Generic Attribute Profile (GATT) debug
CONFIG_BT_DEBUG_HCI_CORE Bluetooth HCI core debug
CONFIG_BT_DEBUG_HCI_DRIVER Bluetooth HCI driver debug
CONFIG_BT_DEBUG_HFP_HF Bluetooth Hands Free Profile (HFP) debug
CONFIG_BT_DEBUG_KEYS Bluetooth security keys debug
CONFIG_BT_DEBUG_L2CAP Bluetooth L2CAP debug
CONFIG_BT_DEBUG_LOG Normal printf-style to console
CONFIG_BT_DEBUG_MONITOR Monitor protocol over UART
CONFIG_BT_DEBUG_NONE No debug log
CONFIG_BT_DEBUG_RFCOMM Bluetooth RFCOMM debug
CONFIG_BT_DEBUG_RPA Bluetooth Resolvable Private Address (RPA) debug
CONFIG_BT_DEBUG_SDP Bluetooth Service Discovery Protocol (SDP) debug
CONFIG_BT_DEBUG_SERVICE Bluetooth Services debug
CONFIG_BT_DEBUG_SETTINGS Bluetooth storage debug
CONFIG_BT_DEBUG_SMP Bluetooth Security Manager Protocol (SMP) debug
CONFIG_BT_DEVICE_APPEARANCE Bluetooth device appearance
CONFIG_BT_DEVICE_NAME Bluetooth device name
CONFIG_BT_DEVICE_NAME_DYNAMIC Allow to set Bluetooth device name on runtime
CONFIG_BT_DEVICE_NAME_GATT_WRITABLE Allow to write name by remote GATT clients
CONFIG_BT_DEVICE_NAME_MAX Maximum size in bytes for device name
CONFIG_BT_DISCARDABLE_BUF_COUNT Number of discardable event buffers
CONFIG_BT_ECC Enable ECDH key generation support
CONFIG_BT_FIXED_PASSKEY Use a fixed passkey for pairing
CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS Configure peripheral preferred connection parameters
CONFIG_BT_GATT_BAS Enable GATT Battery service
CONFIG_BT_GATT_BAS_LOG_LEVEL Battery service log level
CONFIG_BT_GATT_CACHING GATT Caching support
CONFIG_BT_GATT_CLIENT GATT client support
CONFIG_BT_GATT_DIS Enable GATT Device Information service
CONFIG_BT_GATT_DIS_FW_REV Enable DIS Firmware Revision characteristic
CONFIG_BT_GATT_DIS_FW_REV_STR Firmware revision
CONFIG_BT_GATT_DIS_HW_REV Enable DIS Hardware Revision characteristic
CONFIG_BT_GATT_DIS_HW_REV_STR Hardware revision
CONFIG_BT_GATT_DIS_MANUF Manufacturer name
CONFIG_BT_GATT_DIS_MODEL Model name
CONFIG_BT_GATT_DIS_PNP Enable PnP_ID characteristic
CONFIG_BT_GATT_DIS_PNP_PID Product ID
CONFIG_BT_GATT_DIS_PNP_VER Product Version
CONFIG_BT_GATT_DIS_PNP_VID Vendor ID
CONFIG_BT_GATT_DIS_PNP_VID_SRC Vendor ID source
CONFIG_BT_GATT_DIS_SERIAL_NUMBER Enable DIS Serial number characteristic
CONFIG_BT_GATT_DIS_SERIAL_NUMBER_STR Serial Number
CONFIG_BT_GATT_DIS_SETTINGS Enable Settings usage in Device Information Service
CONFIG_BT_GATT_DIS_STR_MAX Maximum size in bytes for DIS strings
CONFIG_BT_GATT_DIS_SW_REV Enable DIS Software Revision characteristic
CONFIG_BT_GATT_DIS_SW_REV_STR Software revision
CONFIG_BT_GATT_DYNAMIC_DB GATT dynamic database support
CONFIG_BT_GATT_ENFORCE_CHANGE_UNAWARE GATT Enforce change-unaware state
CONFIG_BT_GATT_HRS Enable GATT Heart Rate service
CONFIG_BT_GATT_HRS_LOG_LEVEL Heart Rate service log level
CONFIG_BT_GATT_READ_MULTIPLE GATT Read Multiple Characteristic Values support
CONFIG_BT_H4 H:4 UART
CONFIG_BT_H5 H:5 UART [EXPERIMENTAL]
CONFIG_BT_HAS_HCI_VS  
CONFIG_BT_HCI HCI-based
CONFIG_BT_HCI_ACL_FLOW_CONTROL Controller to Host ACL flow control support
CONFIG_BT_HCI_CMD_COUNT Number of HCI command buffers
CONFIG_BT_HCI_HOST  
CONFIG_BT_HCI_MESH_EXT Mesh HCI Command support
CONFIG_BT_HCI_RAW RAW HCI access
CONFIG_BT_HCI_RESERVE  
CONFIG_BT_HCI_TX_PRIO  
CONFIG_BT_HCI_TX_STACK_SIZE  
CONFIG_BT_HCI_VS Zephyr HCI Vendor-Specific Commands
CONFIG_BT_HCI_VS_EVT_USER User Vendor-Specific event handling
CONFIG_BT_HCI_VS_EXT Zephyr HCI Vendor-Specific Extensions
CONFIG_BT_HCI_VS_EXT_DETECT Use heuristics to guess HCI vendor extensions support in advance
CONFIG_BT_HFP_HF Bluetooth Handsfree profile HF Role support [EXPERIMENTAL]
CONFIG_BT_HOST_CRYPTO  
CONFIG_BT_ID_MAX Maximum number of local identities
CONFIG_BT_L2CAP_DYNAMIC_CHANNEL L2CAP Dynamic Channel support
CONFIG_BT_L2CAP_RX_MTU Maximum supported L2CAP MTU for incoming data
CONFIG_BT_L2CAP_TX_BUF_COUNT Number of L2CAP TX buffers
CONFIG_BT_L2CAP_TX_FRAG_COUNT Number of L2CAP TX fragment buffers
CONFIG_BT_L2CAP_TX_MTU Maximum supported L2CAP MTU for L2CAP TX buffers
CONFIG_BT_LLL_VENDOR_NORDIC Use Nordic LLL
CONFIG_BT_LL_SW_LEGACY Software-based BLE Link Layer (deprecated)
CONFIG_BT_LL_SW_SPLIT Software-based BLE Link Layer
CONFIG_BT_LOG_LEVEL  
CONFIG_BT_LOG_LEVEL_DBG Debug
CONFIG_BT_LOG_LEVEL_ERR Error
CONFIG_BT_LOG_LEVEL_INF Info
CONFIG_BT_LOG_LEVEL_OFF Off
CONFIG_BT_LOG_LEVEL_WRN Warning
CONFIG_BT_MAX_CONN Maximum number of simultaneous connections
CONFIG_BT_MAX_PAIRED Maximum number of paired devices
CONFIG_BT_MAX_SCO_CONN Maximum number of simultaneous SCO connections
CONFIG_BT_MAYFLY_YIELD_AFTER_CALL Yield from mayfly thread after first call
CONFIG_BT_MESH Bluetooth Mesh support
CONFIG_BT_MESH_ADV_BUF_COUNT Number of advertising buffers
CONFIG_BT_MESH_APP_KEY_COUNT Maximum number of application keys per network
CONFIG_BT_MESH_CFG_CLI Support for Configuration Client Model
CONFIG_BT_MESH_CRPL Maximum capacity of the replay protection list
CONFIG_BT_MESH_DEBUG Enable debug logs
CONFIG_BT_MESH_DEBUG_ACCESS Access layer debug
CONFIG_BT_MESH_DEBUG_ADV Advertising debug
CONFIG_BT_MESH_DEBUG_BEACON Beacon debug
CONFIG_BT_MESH_DEBUG_CRYPTO Crypto debug
CONFIG_BT_MESH_DEBUG_FRIEND Friend debug
CONFIG_BT_MESH_DEBUG_LOW_POWER Low Power debug
CONFIG_BT_MESH_DEBUG_MODEL Foundation model debug
CONFIG_BT_MESH_DEBUG_NET Network layer debug
CONFIG_BT_MESH_DEBUG_PROV Provisioning debug
CONFIG_BT_MESH_DEBUG_PROXY Proxy debug
CONFIG_BT_MESH_DEBUG_SETTINGS Persistent settings debug
CONFIG_BT_MESH_DEBUG_TRANS Transport layer debug
CONFIG_BT_MESH_DEBUG_USE_ID_ADDR Use identity address for all advertising
CONFIG_BT_MESH_FRIEND Support for acting as a Friend Node
CONFIG_BT_MESH_FRIEND_LPN_COUNT Number of supported LPN nodes
CONFIG_BT_MESH_FRIEND_QUEUE_SIZE Minimum number of buffers supported per Friend Queue
CONFIG_BT_MESH_FRIEND_RECV_WIN Friend Receive Window
CONFIG_BT_MESH_FRIEND_SEG_RX Number of incomplete segment lists per LPN
CONFIG_BT_MESH_FRIEND_SUB_LIST_SIZE Friend Subscription List Size
CONFIG_BT_MESH_GATT_PROXY GATT Proxy Service
CONFIG_BT_MESH_HEALTH_CLI Support for Health Client Model
CONFIG_BT_MESH_IVU_DIVIDER Divider for IV Update state refresh timer
CONFIG_BT_MESH_IV_UPDATE_TEST Test the IV Update Procedure
CONFIG_BT_MESH_LABEL_COUNT Maximum number of Label UUIDs used for Virtual Addresses
CONFIG_BT_MESH_LOW_POWER Support for Low Power features
CONFIG_BT_MESH_LPN_AUTO Automatically start looking for Friend nodes once provisioned
CONFIG_BT_MESH_LPN_AUTO_TIMEOUT Time from last received message before going to LPN mode
CONFIG_BT_MESH_LPN_ESTABLISHMENT Perform Friendship establishment using low power
CONFIG_BT_MESH_LPN_GROUPS Number of groups the LPN can subscribe to
CONFIG_BT_MESH_LPN_INIT_POLL_TIMEOUT The starting value of the PollTimeout timer
CONFIG_BT_MESH_LPN_MIN_QUEUE_SIZE Minimum size of acceptable friend queue (MinQueueSizeLog)
CONFIG_BT_MESH_LPN_POLL_TIMEOUT The value of the PollTimeout timer
CONFIG_BT_MESH_LPN_RECV_DELAY Receive delay requested by the local node
CONFIG_BT_MESH_LPN_RECV_WIN_FACTOR ReceiveWindowFactor, used in the Friend Offer Delay calculation
CONFIG_BT_MESH_LPN_RETRY_TIMEOUT Retry timeout for Friend requests
CONFIG_BT_MESH_LPN_RSSI_FACTOR RSSIFactor, used in the Friend Offer Delay calculation
CONFIG_BT_MESH_LPN_SCAN_LATENCY Latency for enabling scanning
CONFIG_BT_MESH_MODEL_GROUP_COUNT Maximum number of group address subscriptions per model
CONFIG_BT_MESH_MODEL_KEY_COUNT Maximum number of application keys per model
CONFIG_BT_MESH_MSG_CACHE_SIZE Network message cache size
CONFIG_BT_MESH_NODE_ID_TIMEOUT Node Identity advertising timeout
CONFIG_BT_MESH_PB_ADV Provisioning support using the advertising bearer (PB-ADV)
CONFIG_BT_MESH_PB_GATT Provisioning support using GATT (PB-GATT)
CONFIG_BT_MESH_PROV  
CONFIG_BT_MESH_PROXY  
CONFIG_BT_MESH_PROXY_FILTER_SIZE Maximum number of filter entries per Proxy Client
CONFIG_BT_MESH_RELAY Relay support
CONFIG_BT_MESH_RPL_STORE_TIMEOUT Minimum frequency that the RPL gets updated in storage
CONFIG_BT_MESH_RX_SDU_MAX Maximum incoming Upper Transport Access PDU length
CONFIG_BT_MESH_RX_SEG_MSG_COUNT Maximum number of simultaneous incoming segmented messages
CONFIG_BT_MESH_SELF_TEST Perform self-tests
CONFIG_BT_MESH_SEQ_STORE_RATE How often the sequence number gets updated in storage
CONFIG_BT_MESH_SHELL Enable Bluetooth Mesh shell
CONFIG_BT_MESH_STORE_TIMEOUT Delay (in seconds) before storing anything persistently
CONFIG_BT_MESH_SUBNET_COUNT Maximum number of mesh subnets per network
CONFIG_BT_MESH_TX_SEG_MAX Maximum number of segments in outgoing messages
CONFIG_BT_MESH_TX_SEG_MSG_COUNT Maximum number of simultaneous outgoing segmented messages
CONFIG_BT_MONITOR_ON_DEV_NAME Device Name of Bluetooth monitor logging UART
CONFIG_BT_NO_DRIVER No default HCI driver
CONFIG_BT_OBSERVER Observer Role support
CONFIG_BT_OOB_DATA_FIXED Use a fixed random number for LESC OOB pairing
CONFIG_BT_PAGE_TIMEOUT Bluetooth Page Timeout
CONFIG_BT_PERIPHERAL Peripheral Role support
CONFIG_BT_PERIPHERAL_PREF_MAX_INT Peripheral preferred maximum connection interval in 1.25ms units
CONFIG_BT_PERIPHERAL_PREF_MIN_INT Peripheral preferred minimum connection interval in 1.25ms units
CONFIG_BT_PERIPHERAL_PREF_SLAVE_LATENCY Peripheral preferred slave latency in Connection Intervals
CONFIG_BT_PERIPHERAL_PREF_TIMEOUT Peripheral preferred supervision timeout in 10ms units
CONFIG_BT_PHY_UPDATE PHY Update
CONFIG_BT_PRIVACY Privacy Feature
CONFIG_BT_RECV_IS_RX_THREAD  
CONFIG_BT_RFCOMM Bluetooth RFCOMM protocol support [EXPERIMENTAL]
CONFIG_BT_RFCOMM_L2CAP_MTU L2CAP MTU for RFCOMM frames
CONFIG_BT_RPA  
CONFIG_BT_RPA_TIMEOUT Resolvable Private Address timeout
CONFIG_BT_RX_BUF_COUNT Number of HCI RX buffers
CONFIG_BT_RX_BUF_LEN Maximum supported HCI RX buffer length
CONFIG_BT_RX_PRIO  
CONFIG_BT_RX_STACK_SIZE Size of the receiving thread stack
CONFIG_BT_RX_USER_PDU_LEN Maximum supported proprietary PDU buffer length
CONFIG_BT_SCAN_WITH_IDENTITY Perform active scanning using local identity address
CONFIG_BT_SETTINGS Store Bluetooth state and configuration persistently
CONFIG_BT_SETTINGS_CCC_STORE_ON_WRITE Store CCC value immediately after it has been written
CONFIG_BT_SHELL Enable Bluetooth shell
CONFIG_BT_SIGNING Data signing support
CONFIG_BT_SMP Security Manager Protocol support
CONFIG_BT_SMP_ENFORCE_MITM Enforce MITM protection
CONFIG_BT_SMP_FORCE_BREDR Force Bluetooth SMP over BR/EDR
CONFIG_BT_SMP_SC_ONLY Secure Connections Only Mode
CONFIG_BT_SMP_SC_PAIR_ONLY Disable legacy pairing
CONFIG_BT_SMP_SELFTEST Bluetooth SMP self tests executed on init
CONFIG_BT_SPI SPI HCI
CONFIG_BT_SPI_BLUENRG Enable compatibility with BlueNRG-based devices
CONFIG_BT_STM32_IPM IPM HCI
CONFIG_BT_TESTING Bluetooth Testing
CONFIG_BT_TICKER_COMPATIBILITY_MODE Ticker compatibility mode
CONFIG_BT_TINYCRYPT_ECC Use TinyCrypt library for ECDH
CONFIG_BT_UART  
CONFIG_BT_UART_ON_DEV_NAME Device Name of UART Device for Bluetooth
CONFIG_BT_USERCHAN HCI User Channel based driver
CONFIG_BT_USE_DEBUG_KEYS Enable Security Manager Debug Mode
CONFIG_BT_WAIT_NOP Wait for “NOP” Command Complete event during init
CONFIG_BT_WHITELIST Enable whitelist support
CONFIG_BUILD_NO_GAP_FILL Don’t fill gaps in generated hex/bin/s19 files.
CONFIG_BUILD_OUTPUT_BIN Build a binary in BIN format
CONFIG_BUILD_OUTPUT_EXE Build a binary in ELF format with .exe extension
CONFIG_BUILD_OUTPUT_HEX Build a binary in HEX format
CONFIG_BUILD_OUTPUT_S19 Build a binary in S19 format
CONFIG_BUILD_OUTPUT_STRIPPED Build a stripped binary
CONFIG_BUILTIN_STACK_GUARD Thread Stack Guards based on built-in ARM stack limit checking
CONFIG_CACHE_FLUSHING Enable d-cache flushing mechanism / Enable cache flushing mechanism
CONFIG_CACHE_LINE_SIZE Cache line size / Cache line size
CONFIG_CACHE_LINE_SIZE_DETECT Detect d-cache line size at runtime / Detect cache line size at runtime
CONFIG_CAN CAN Drivers
CONFIG_CAN_0 Enable CAN 0
CONFIG_CAN_1 Enable CAN 1
CONFIG_CAN_INIT_PRIORITY CAN driver init priority
CONFIG_CAN_LOG_LEVEL  
CONFIG_CAN_LOG_LEVEL_DBG Debug
CONFIG_CAN_LOG_LEVEL_ERR Error
CONFIG_CAN_LOG_LEVEL_INF Info
CONFIG_CAN_LOG_LEVEL_OFF Off
CONFIG_CAN_LOG_LEVEL_WRN Warning
CONFIG_CAN_LOOPBACK Loopback CAN driver
CONFIG_CAN_LOOPBACK_DEV_NAME CAN loopback device name
CONFIG_CAN_LOOPBACK_FRAME_BUF_SIZE Frame buffer count
CONFIG_CAN_MAX_FILTER Maximum number of concurrent active filters / Maximum number of concurrent active RX filters / Maximum number of concurrent active filters
CONFIG_CAN_MCP2515 MCP2515 CAN Driver
CONFIG_CAN_MCP2515_INIT_PRIORITY Init priority
CONFIG_CAN_MCP2515_INT_THREAD_PRIO Priority for interrupt handler
CONFIG_CAN_MCP2515_INT_THREAD_STACK_SIZE Stack size for interrupt handler
CONFIG_CAN_MCP2515_MAX_FILTER Maximum number of concurrent active filters
CONFIG_CAN_MCP2515_OSC_FREQ Oscillator frequency
CONFIG_CAN_MCUX_FLEXCAN MCUX FlexCAN driver
CONFIG_CAN_NET Enable 6loCAN network interface [EXPERIMENTAL]
CONFIG_CAN_NET_INIT_PRIORITY CAN NET driver init priority
CONFIG_CAN_NET_LOG_LEVEL  
CONFIG_CAN_NET_LOG_LEVEL_DBG Debug
CONFIG_CAN_NET_LOG_LEVEL_DEFAULT Default
CONFIG_CAN_NET_LOG_LEVEL_ERR Error
CONFIG_CAN_NET_LOG_LEVEL_INF Info
CONFIG_CAN_NET_LOG_LEVEL_OFF Off
CONFIG_CAN_NET_LOG_LEVEL_WRN Warning
CONFIG_CAN_NET_NAME Network device name
CONFIG_CAN_RECEIVER_WORKQ_PRIO Priority of the receiver workq
CONFIG_CAN_RX_TIMESTAMP Enable receiving timestamps
CONFIG_CAN_SHELL Enable CAN Shell
CONFIG_CAN_STM32 STM32 CAN Driver
CONFIG_CAN_WORKQ_FRAMES_BUF_CNT Work queue buffer frame count
CONFIG_CAVS_ICTL CAVS Interrupt Logic
CONFIG_CAVS_ICTL_0_NAME CAVS 0 Driver name
CONFIG_CAVS_ICTL_0_OFFSET Parent interrupt number to which CAVS_0 maps
CONFIG_CAVS_ICTL_1_NAME CAVS 1 Driver name
CONFIG_CAVS_ICTL_1_OFFSET Parent interrupt number to which CAVS_1 maps
CONFIG_CAVS_ICTL_2_NAME CAVS 2 Driver name
CONFIG_CAVS_ICTL_2_OFFSET Parent interrupt number to which CAVS_2 maps
CONFIG_CAVS_ICTL_3_NAME CAVS 3 Driver name
CONFIG_CAVS_ICTL_3_OFFSET Parent interrupt number to which CAVS_3 maps
CONFIG_CAVS_ICTL_INIT_PRIORITY CAVS ICTL Init priority
CONFIG_CAVS_ISR_TBL_OFFSET Offset in the SW ISR Table
CONFIG_CBOR_ENCODER_NO_CHECK_USER No encoder checks for user args for validity
CONFIG_CBOR_FLOATING_POINT Floating point support
CONFIG_CBOR_HALF_FLOAT_TYPE Half float type support
CONFIG_CBOR_NO_DFLT_READER No default reader support
CONFIG_CBOR_NO_DFLT_WRITER No default writer support
CONFIG_CBOR_PARSER_MAX_RECURSIONS Parser max recursions
CONFIG_CBOR_PARSER_NO_STRICT_CHECKS No strict parser checks
CONFIG_CBOR_PRETTY_PRINTING Implement pretty printing functionality
CONFIG_CBOR_WITHOUT_OPEN_MEMSTREAM Without open memstream
CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE ROM bootloader backdoor
CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_LEVEL ROM bootloader backdoor level
CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_PIN ROM bootloader backdoor pin
CONFIG_CC13X2_CC26X2_BOOTLOADER_ENABLE ROM bootloader
CONFIG_CC3220SF_DEBUG Prepend debug header, disabling flash verification
CONFIG_CCS811 CCS811 Digital Gas Sensor
CONFIG_CCS811_GPIO_DEV_NAME GPIO device
CONFIG_CCS811_GPIO_RESET Enable GPIO Reset for CCS811
CONFIG_CCS811_GPIO_RESET_PIN_NUM GPIO Reset pin number
CONFIG_CCS811_GPIO_WAKEUP Enable GPIO Wakeup for CCS811
CONFIG_CCS811_GPIO_WAKEUP_PIN_NUM GPIO Wakeup pin number
CONFIG_CDC_ACM_BULK_EP_MPS  
CONFIG_CDC_ACM_IAD Force using Interface Association Descriptor
CONFIG_CDC_ACM_INTERRUPT_EP_MPS  
CONFIG_CDC_ECM_BULK_EP_MPS  
CONFIG_CDC_ECM_INTERRUPT_EP_MPS  
CONFIG_CDC_EEM_BULK_EP_MPS  
CONFIG_CFB_LOG_LEVEL  
CONFIG_CFB_LOG_LEVEL_DBG Debug
CONFIG_CFB_LOG_LEVEL_ERR Error
CONFIG_CFB_LOG_LEVEL_INF Info
CONFIG_CFB_LOG_LEVEL_OFF Off
CONFIG_CFB_LOG_LEVEL_WRN Warning
CONFIG_CHARACTER_FRAMEBUFFER Character framebuffer for dot matrix displays
CONFIG_CHARACTER_FRAMEBUFFER_SHELL Character Framebuffer shell
CONFIG_CHARACTER_FRAMEBUFFER_SHELL_DRIVER_NAME  
CONFIG_CHARACTER_FRAMEBUFFER_USE_DEFAULT_FONTS Use default fonts
CONFIG_CIVETWEB Civetweb Support
CONFIG_CLFLUSH_DETECT Detect support of CLFLUSH instruction at runtime
CONFIG_CLFLUSH_INSTRUCTION_SUPPORTED CLFLUSH instruction supported
CONFIG_CLOCK_CONTROL Hardware clock controller support
CONFIG_CLOCK_CONTROL_BEETLE BEETLE Clock Control
CONFIG_CLOCK_CONTROL_BEETLE_DEVICE_INIT_PRIORITY Clock Control Device Priority
CONFIG_CLOCK_CONTROL_BEETLE_ENABLE_PLL Enable PLL on Beetle
CONFIG_CLOCK_CONTROL_IMX_CCM  
CONFIG_CLOCK_CONTROL_LOG_LEVEL  
CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG Debug
CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR Error
CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF Info
CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF Off
CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN Warning
CONFIG_CLOCK_CONTROL_MCUX_CCM MCUX CCM driver
CONFIG_CLOCK_CONTROL_MCUX_MCG MCUX MCG driver
CONFIG_CLOCK_CONTROL_MCUX_PCC MCUX PCC driver
CONFIG_CLOCK_CONTROL_MCUX_SCG MCUX SCG driver
CONFIG_CLOCK_CONTROL_MCUX_SIM MCUX SIM driver
CONFIG_CLOCK_CONTROL_NRF NRF Clock controller support
CONFIG_CLOCK_CONTROL_NRF_FORCE_ALT  
CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM 76 ppm to 100 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM 101 ppm to 150 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM 0 ppm to 20 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM 151 ppm to 250 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM 21 ppm to 30 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM 251 ppm to 500 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM 31 ppm to 50 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM 51 ppm to 75 ppm
CONFIG_CLOCK_CONTROL_NRF_K32SRC_BLOCKING Blocking 32KHz crystal oscillator startup
CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_FULL_SWING External full swing
CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_LOW_SWING External low swing
CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC RC Oscillator
CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH Synthesized from HFCLK
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL Crystal Oscillator
CONFIG_CLOCK_CONTROL_RV32M1_PCC RV32M1 PCC driver
CONFIG_CLOCK_CONTROL_STM32_CUBE STM32 Reset & Clock Control
CONFIG_CLOCK_CONTROL_STM32_DEVICE_INIT_PRIORITY Clock Control Device Priority
CONFIG_CLOCK_STM32_AHB4_PRESCALER AHB4 HCLK prescaler
CONFIG_CLOCK_STM32_AHB_PRESCALER AHB prescaler
CONFIG_CLOCK_STM32_APB1_PRESCALER APB1 prescaler
CONFIG_CLOCK_STM32_APB2_PRESCALER APB2 prescaler
CONFIG_CLOCK_STM32_CPU1_PRESCALER CPU1 HCLK prescaler
CONFIG_CLOCK_STM32_CPU2_PRESCALER CPU2 HCLK prescaler
CONFIG_CLOCK_STM32_D1CPRE D1 Domain, CPU1 clock prescaler
CONFIG_CLOCK_STM32_D1PPRE D1 DOMAIN, APB3 prescaler
CONFIG_CLOCK_STM32_D2PPRE1 APB1 prescaler
CONFIG_CLOCK_STM32_D2PPRE2 D2 DOMAIN, APB2 prescaler
CONFIG_CLOCK_STM32_D3PPRE APB4 prescaler
CONFIG_CLOCK_STM32_HPRE hclk prescaler, D2 domain (CPU2) Clock prescaler
CONFIG_CLOCK_STM32_HSE_BYPASS HSE bypass
CONFIG_CLOCK_STM32_HSE_CLOCK HSE clock value
CONFIG_CLOCK_STM32_LSE Low-speed external clock
CONFIG_CLOCK_STM32_MCO1_DIV MCO1 prescaler
CONFIG_CLOCK_STM32_MCO1_SRC_HSE HSE
CONFIG_CLOCK_STM32_MCO1_SRC_HSI HSI
CONFIG_CLOCK_STM32_MCO1_SRC_LSE LSE
CONFIG_CLOCK_STM32_MCO1_SRC_NOCLOCK NOCLOCK
CONFIG_CLOCK_STM32_MCO1_SRC_PLLCLK PLLCLK
CONFIG_CLOCK_STM32_MCO2_DIV MCO2 prescaler
CONFIG_CLOCK_STM32_MCO2_SRC_HSE HSE
CONFIG_CLOCK_STM32_MCO2_SRC_NOCLOCK NOCLOCK
CONFIG_CLOCK_STM32_MCO2_SRC_PLLCLK PLLCLK
CONFIG_CLOCK_STM32_MCO2_SRC_PLLI2S PLLI2S
CONFIG_CLOCK_STM32_MCO2_SRC_SYSCLK SYSCLK
CONFIG_CLOCK_STM32_MSI_PLL_MODE MSI PLL MODE
CONFIG_CLOCK_STM32_MSI_RANGE MSI frequency range
CONFIG_CLOCK_STM32_PLL2_MULTIPLIER PLL2 multiplier
CONFIG_CLOCK_STM32_PLL2_PREDIV2 PREDIV2 Prescaler
CONFIG_CLOCK_STM32_PLL_DIVISOR PLL divisor
CONFIG_CLOCK_STM32_PLL_MULTIPLIER PLL multiplier / PLL multiplier / PLL multiplier
CONFIG_CLOCK_STM32_PLL_M_DIVISOR Division factor for PLL VCO input clock / PLL divisor / PLL divisor / PLL divisor
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER Multiplier factor for PLL VCO output clock / PLL1 VCO multiplier / PLL multiplier / PLL multiplier
CONFIG_CLOCK_STM32_PLL_PREDIV PREDIV Prescaler
CONFIG_CLOCK_STM32_PLL_PREDIV1 PREDIV1 Prescaler / PREDIV1 Prescaler
CONFIG_CLOCK_STM32_PLL_P_DIVISOR PLL division factor for main system clock / PLL P Divisor / PLL P Divisor / PLL P Divisor
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR Division factor for OTG FS, SDIO and RNG clocks / PLL Q Divisor / PLL Q Divisor / PLL Q Divisor
CONFIG_CLOCK_STM32_PLL_R_DIVISOR PLL R Divisor / PLL R Divisor / PLL R Divisor
CONFIG_CLOCK_STM32_PLL_SRC_HSE HSE
CONFIG_CLOCK_STM32_PLL_SRC_HSI HSI
CONFIG_CLOCK_STM32_PLL_SRC_MSI MSI
CONFIG_CLOCK_STM32_PLL_SRC_PLL2 PLL2
CONFIG_CLOCK_STM32_PLL_XTPRE HSE to PLL /2 prescaler
CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE HSE
CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI HSI
CONFIG_CLOCK_STM32_SYSCLK_SRC_MSI MSI
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL PLL
CONFIG_CMSIS_MAX_THREAD_COUNT Maximum thread count in CMSIS RTOS application
CONFIG_CMSIS_MUTEX_MAX_COUNT Maximum mutex count in CMSIS application
CONFIG_CMSIS_RTOS_V1 CMSIS RTOS v1 API
CONFIG_CMSIS_RTOS_V2 CMSIS RTOS v2 API
CONFIG_CMSIS_SEMAPHORE_MAX_COUNT Maximum semaphore count in CMSIS application
CONFIG_CMSIS_THREAD_MAX_STACK_SIZE Max stack size threads can be allocated in CMSIS RTOS application
CONFIG_CMSIS_TIMER_MAX_COUNT Maximum timer count in CMSIS application
CONFIG_CMSIS_V2_EVT_FLAGS_MAX_COUNT Maximum event flags count in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_MEM_SLAB_MAX_COUNT Maximum mem slab count in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_MEM_SLAB_MAX_DYNAMIC_SIZE Maximum dynamic mem slab/pool size in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_MSGQ_MAX_COUNT Maximum message queue count in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_MSGQ_MAX_DYNAMIC_SIZE Maximum dynamic message queue size in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_MUTEX_MAX_COUNT Maximum mutex count in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_SEMAPHORE_MAX_COUNT Maximum semaphore count in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT Maximum dynamic thread count in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_THREAD_DYNAMIC_STACK_SIZE Dynamic stack size threads are allocated in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_THREAD_MAX_COUNT Maximum thread count in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_THREAD_MAX_STACK_SIZE Max stack size threads can be allocated in CMSIS RTOS V2 application
CONFIG_CMSIS_V2_TIMER_MAX_COUNT Maximum timer count in CMSIS RTOS V2 application
CONFIG_CMU_HFCLK_HFRCO Internal high frequency RC oscillator
CONFIG_CMU_HFCLK_HFXO External high frequency crystal oscillator
CONFIG_CMU_HFCLK_LFXO External low frequency crystal oscillator
CONFIG_CMU_HFXO_FREQ External high frequency oscillator frequency
CONFIG_CMU_LFXO_FREQ External low frequency oscillator frequency
CONFIG_COAP CoAP Support
CONFIG_COAP_EXTENDED_OPTIONS_LEN Support for CoAP extended options
CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE CoAP extended options length value
CONFIG_COAP_INIT_ACK_TIMEOUT_MS base length of the random generated initial ACK timeout in ms
CONFIG_COAP_LOG_LEVEL  
CONFIG_COAP_LOG_LEVEL_DBG Debug
CONFIG_COAP_LOG_LEVEL_DEFAULT Default
CONFIG_COAP_LOG_LEVEL_ERR Error
CONFIG_COAP_LOG_LEVEL_INF Info
CONFIG_COAP_LOG_LEVEL_OFF Off
CONFIG_COAP_LOG_LEVEL_WRN Warning
CONFIG_COAP_TEST_API_ENABLE Enable test API for CoAP unit tests
CONFIG_COAP_WELL_KNOWN_BLOCK_WISE CoAP ./well-known/core services block wise support
CONFIG_COAP_WELL_KNOWN_BLOCK_WISE_SIZE CoAP ./well-known/core services block wise support
CONFIG_CODE_DATA_RELOCATION Relocate code/data sections
CONFIG_CODE_DENSITY Code Density Option
CONFIG_CODE_FLEXSPI Link code into external FlexSPI-controlled memory
CONFIG_CODE_FLEXSPI2 Link code into internal FlexSPI-controlled memory
CONFIG_CODE_ITCM Link code into internal instruction tightly coupled memory (ITCM)
CONFIG_COMPAT_INCLUDES Suppress warnings when using header shims
CONFIG_COMPILER_OPT Custom compiler options
CONFIG_CONSOLE Console drivers
CONFIG_CONSOLE_GETCHAR Character by character input and output
CONFIG_CONSOLE_GETCHAR_BUFSIZE console_getchar() buffer size
CONFIG_CONSOLE_GETLINE Line by line input
CONFIG_CONSOLE_HANDLER Enable console input handler
CONFIG_CONSOLE_HAS_DRIVER  
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN Console maximum input line length
CONFIG_CONSOLE_PUTCHAR_BUFSIZE console_putchar() buffer size
CONFIG_CONSOLE_SUBSYS Console subsystem/support routines [EXPERIMENTAL]
CONFIG_COOP_ENABLED  
CONFIG_CORTEX_M_SYSTICK Cortex-M SYSTICK timer
CONFIG_COUNTER Counter Drivers
CONFIG_COUNTER_0_NAME QMSI AON Timer Device Name
CONFIG_COUNTER_CMOS Counter driver for x86 CMOS/RTC clock
CONFIG_COUNTER_GECKO_RTCC Silicon Labs Gecko Counter (RTCC) driver
CONFIG_COUNTER_IMX_EPIT IMX EPIT driver
CONFIG_COUNTER_IMX_EPIT_1 Counter 1
CONFIG_COUNTER_IMX_EPIT_2 Counter 2
CONFIG_COUNTER_LOG_LEVEL  
CONFIG_COUNTER_LOG_LEVEL_DBG Debug
CONFIG_COUNTER_LOG_LEVEL_ERR Error
CONFIG_COUNTER_LOG_LEVEL_INF Info
CONFIG_COUNTER_LOG_LEVEL_OFF Off
CONFIG_COUNTER_LOG_LEVEL_WRN Warning
CONFIG_COUNTER_MCUX_GPT MCUX GPT driver
CONFIG_COUNTER_MCUX_GPT1 Enable Counter on GPT1
CONFIG_COUNTER_MCUX_GPT2 Enable Counter on GPT2
CONFIG_COUNTER_MCUX_RTC MCUX RTC driver
CONFIG_COUNTER_NRF_RTC  
CONFIG_COUNTER_NRF_TIMER  
CONFIG_COUNTER_RTC0 Enable Counter on RTC0
CONFIG_COUNTER_RTC1 Enable Counter on RTC1
CONFIG_COUNTER_RTC2 Enable Counter on RTC2
CONFIG_COUNTER_RTC_STM32 STM32 Counter RTC driver
CONFIG_COUNTER_RTC_STM32_CLOCK_LSE LSE
CONFIG_COUNTER_RTC_STM32_CLOCK_LSI LSI
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_HIGH High
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_LOW Low
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMHIGH Medium High
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMLOW Medium Low
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_STRENGTH  
CONFIG_COUNTER_RTC_WITH_PPI_WRAP  
CONFIG_COUNTER_SAM0_TC32 SAM0 series 32-bit basic timer driver
CONFIG_COUNTER_SAM0_TC32_0_DIVISOR  
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_1 clock / 1
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_1024 clock / 1024
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_16 clock / 16
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_2 clock / 2
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_256 clock / 256
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_4 clock / 4
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_64 clock / 64
CONFIG_COUNTER_SAM0_TC32_0_PRESCALER_8 clock / 8
CONFIG_COUNTER_SAM0_TC32_2_DIVISOR  
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_1 clock / 1
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_1024 clock / 1024
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_16 clock / 16
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_2 clock / 2
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_256 clock / 256
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_4 clock / 4
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_64 clock / 64
CONFIG_COUNTER_SAM0_TC32_2_PRESCALER_8 clock / 8
CONFIG_COUNTER_SAM0_TC32_4_DIVISOR  
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_1 clock / 1
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_1024 clock / 1024
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_16 clock / 16
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_2 clock / 2
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_256 clock / 256
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_4 clock / 4
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_64 clock / 64
CONFIG_COUNTER_SAM0_TC32_4_PRESCALER_8 clock / 8
CONFIG_COUNTER_SAM0_TC32_6_DIVISOR  
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_1 clock / 1
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_1024 clock / 1024
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_16 clock / 16
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_2 clock / 2
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_256 clock / 256
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_4 clock / 4
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_64 clock / 64
CONFIG_COUNTER_SAM0_TC32_6_PRESCALER_8 clock / 8
CONFIG_COUNTER_TIMER0 Enable Counter on TIMER0
CONFIG_COUNTER_TIMER1 Enable Counter on TIMER1
CONFIG_COUNTER_TIMER2 Enable Counter on TIMER2
CONFIG_COUNTER_TIMER3 Enable Counter on TIMER3
CONFIG_COUNTER_TIMER4 Enable Counter on TIMER4
CONFIG_COVERAGE Create coverage data
CONFIG_COVERAGE_GCOV Create Coverage data from hardware platform
CONFIG_CPLUSPLUS C++ support for the application
CONFIG_CPU_APOLLO_LAKE  
CONFIG_CPU_ARCEM ARC EM cores
CONFIG_CPU_ARCHS ARC HS cores
CONFIG_CPU_ARCV2  
CONFIG_CPU_ATOM  
CONFIG_CPU_CLOCK_FREQ_MHZ CPU Clock Frequency in MHz
CONFIG_CPU_CORTEX  
CONFIG_CPU_CORTEX_M  
CONFIG_CPU_CORTEX_M0  
CONFIG_CPU_CORTEX_M0PLUS  
CONFIG_CPU_CORTEX_M0_HAS_VECTOR_TABLE_REMAP  
CONFIG_CPU_CORTEX_M23  
CONFIG_CPU_CORTEX_M3  
CONFIG_CPU_CORTEX_M33  
CONFIG_CPU_CORTEX_M4  
CONFIG_CPU_CORTEX_M7  
CONFIG_CPU_CORTEX_M_HAS_BASEPRI  
CONFIG_CPU_CORTEX_M_HAS_CMSE  
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS  
CONFIG_CPU_CORTEX_M_HAS_SPLIM  
CONFIG_CPU_CORTEX_M_HAS_SYSTICK  
CONFIG_CPU_CORTEX_M_HAS_VTOR  
CONFIG_CPU_CORTEX_R  
CONFIG_CPU_CORTEX_R4  
CONFIG_CPU_CORTEX_R5  
CONFIG_CPU_EM4  
CONFIG_CPU_EM4_DMIPS  
CONFIG_CPU_EM4_FPUDA  
CONFIG_CPU_EM4_FPUS  
CONFIG_CPU_EM6  
CONFIG_CPU_HAS_ARM_MPU  
CONFIG_CPU_HAS_ARM_SAU  
CONFIG_CPU_HAS_FPU  
CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION  
CONFIG_CPU_HAS_MPU  
CONFIG_CPU_HAS_NRF_IDAU  
CONFIG_CPU_HAS_NXP_MPU  
CONFIG_CPU_HAS_TEE  
CONFIG_CPU_HS38_LINUX  
CONFIG_CPU_MINUTEIA  
CONFIG_CPU_NIOS2_GEN2  
CONFIG_CRYPTO Crypto Drivers [EXPERIMENTAL]
CONFIG_CRYPTO_ATAES132A Atmel ATAES132A 32k AES Serial EEPROM support
CONFIG_CRYPTO_ATAES132A_DRV_NAME Driver’s name
CONFIG_CRYPTO_ATAES132A_I2C_ADDR ATAES132A I2C address
CONFIG_CRYPTO_ATAES132A_I2C_PORT_NAME I2C master controller port name
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_FAST Fast
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_STANDARD Standard
CONFIG_CRYPTO_INIT_PRIORITY Crypto devices init priority
CONFIG_CRYPTO_LOG_LEVEL  
CONFIG_CRYPTO_LOG_LEVEL_DBG Debug
CONFIG_CRYPTO_LOG_LEVEL_ERR Error
CONFIG_CRYPTO_LOG_LEVEL_INF Info
CONFIG_CRYPTO_LOG_LEVEL_OFF Off
CONFIG_CRYPTO_LOG_LEVEL_WRN Warning
CONFIG_CRYPTO_MBEDTLS_SHIM Enable mbedTLS shim driver [EXPERIMENTAL]
CONFIG_CRYPTO_MBEDTLS_SHIM_DRV_NAME Device name for mbedTLS Pseudo device
CONFIG_CRYPTO_MBEDTLS_SHIM_MAX_SESSION Maximum of sessions mbedTLS shim driver can handle
CONFIG_CRYPTO_TINYCRYPT_SHIM Enable TinyCrypt shim driver [EXPERIMENTAL]
CONFIG_CRYPTO_TINYCRYPT_SHIM_DRV_NAME Device name for TinyCrypt Pseudo device
CONFIG_CRYPTO_TINYCRYPT_SHIM_MAX_SESSION Maximum of sessions TinyCrypt shim driver can handle
CONFIG_CUSTOM_LINKER_SCRIPT Path to custom linker script
CONFIG_CUSTOM_RODATA_LD (DEPRECATED) Include custom-rodata.ld
CONFIG_CUSTOM_RWDATA_LD (DEPRECATED) Include custom-rwdata.ld
CONFIG_CUSTOM_SECTIONS_LD (DEPRECATED) Include custom-sections.ld
CONFIG_DATA_DTCM Link data into internal data tightly coupled memory (DTCM)
CONFIG_DATA_ENDIANNESS_LITTLE  
CONFIG_DATA_SEMC Link data into external SEMC-controlled memory
CONFIG_DEBUG Build kernel with debugging enabled
CONFIG_DEBUG_INFO Enable system debugging information
CONFIG_DEBUG_OPTIMIZATIONS Optimize debugging experience
CONFIG_DEVICE_CONFIGURATION_DATA Enable device configuration data
CONFIG_DEVICE_IDLE_PM Enable device Idle Power Management
CONFIG_DEVICE_POWER_MANAGEMENT Device power management
CONFIG_DEVICE_SHELL Enable device shell
CONFIG_DHT DHT Temperature and Humidity Sensor
CONFIG_DHT_CHIP_DHT11 DHT11
CONFIG_DHT_CHIP_DHT22 DHT22
CONFIG_DHT_GPIO_DEV_NAME GPIO device
CONFIG_DHT_GPIO_PIN_NUM Interrupt GPIO pin number
CONFIG_DHT_NAME Driver name
CONFIG_DISABLE_SSBD Disable Speculative Store Bypass
CONFIG_DISK_ACCESS Disk Interface
CONFIG_DISK_ACCESS_FLASH Flash
CONFIG_DISK_ACCESS_MAX_VOLUMES Maximum Disk Interfaces
CONFIG_DISK_ACCESS_RAM RAM Disk
CONFIG_DISK_ACCESS_SDHC SDHC card access
CONFIG_DISK_ACCESS_SPI_SDHC SDHC access over SPI
CONFIG_DISK_ACCESS_USDHC NXP i.MXRT USDHC driver
CONFIG_DISK_ACCESS_USDHC1 NXP i.MXRT USDHC instance 1
CONFIG_DISK_ACCESS_USDHC2 NXP i.MXRT USDHC instance 2
CONFIG_DISK_ERASE_BLOCK_SIZE Flash device erasable block size in hex
CONFIG_DISK_FLASH_DEV_NAME Flash device name to be used as storage backend
CONFIG_DISK_FLASH_ERASE_ALIGNMENT Flash device erase alignment in hex
CONFIG_DISK_FLASH_MAX_RW_SIZE Flash device max read-write size in decimal
CONFIG_DISK_FLASH_START Flash device start address in hex
CONFIG_DISK_FLASH_VOLUME_NAME Flash mount point or drive name
CONFIG_DISK_LOG_LEVEL  
CONFIG_DISK_LOG_LEVEL_DBG Debug
CONFIG_DISK_LOG_LEVEL_ERR Error
CONFIG_DISK_LOG_LEVEL_INF Info
CONFIG_DISK_LOG_LEVEL_OFF Off
CONFIG_DISK_LOG_LEVEL_WRN Warning
CONFIG_DISK_RAM_VOLUME_NAME RAM Disk mount point or drive name
CONFIG_DISK_RAM_VOLUME_SIZE RAM Disk size in kilobytes
CONFIG_DISK_SDHC_VOLUME_NAME SDHC Disk mount point or drive name
CONFIG_DISK_VOLUME_SIZE Flash device volume size in hex
CONFIG_DISPLAY Display Drivers
CONFIG_DISPLAY_LOG_LEVEL  
CONFIG_DISPLAY_LOG_LEVEL_DBG Debug
CONFIG_DISPLAY_LOG_LEVEL_ERR Error
CONFIG_DISPLAY_LOG_LEVEL_INF Info
CONFIG_DISPLAY_LOG_LEVEL_OFF Off
CONFIG_DISPLAY_LOG_LEVEL_WRN Warning
CONFIG_DISPLAY_MCUX_ELCDIF MCUX eLCDIF driver
CONFIG_DMA DMA driver Configuration
CONFIG_DMA_0_IRQ_PRI IRQ Priority for DMA Controller 0
CONFIG_DMA_0_NAME Device name for DMA Controller 0
CONFIG_DMA_1_IRQ_PRI IRQ Priority for DMA Controller 1
CONFIG_DMA_1_NAME Device name for DMA Controller 1
CONFIG_DMA_2_IRQ_PRI IRQ Priority for DMA Controller 2
CONFIG_DMA_2_NAME Device name for DMA Controller 2
CONFIG_DMA_CAVS Enable CAVS DMA driver
CONFIG_DMA_LOG_LEVEL  
CONFIG_DMA_LOG_LEVEL_DBG Debug
CONFIG_DMA_LOG_LEVEL_ERR Error
CONFIG_DMA_LOG_LEVEL_INF Info
CONFIG_DMA_LOG_LEVEL_OFF Off
CONFIG_DMA_LOG_LEVEL_WRN Warning
CONFIG_DMA_NIOS2_MSGDMA Nios-II Modular Scatter-Gather DMA(MSGDMA) driver
CONFIG_DMA_QMSI Enable QMSI DMA driver
CONFIG_DMA_SAM0 Atmel SAM0 series DMAC driver
CONFIG_DMA_SAM_XDMAC Atmel SAM DMA (XDMAC) driver
CONFIG_DMA_STM32F4X Enable STM32F4x DMA driver
CONFIG_DNS_NUM_CONCUR_QUERIES Number of simultaneous DNS queries per one DNS context
CONFIG_DNS_RESOLVER DNS resolver
CONFIG_DNS_RESOLVER_ADDITIONAL_BUF_CTR Additional DNS buffers
CONFIG_DNS_RESOLVER_ADDITIONAL_QUERIES Additional DNS queries
CONFIG_DNS_RESOLVER_LOG_LEVEL  
CONFIG_DNS_RESOLVER_LOG_LEVEL_DBG Debug
CONFIG_DNS_RESOLVER_LOG_LEVEL_DEFAULT Default
CONFIG_DNS_RESOLVER_LOG_LEVEL_ERR Error
CONFIG_DNS_RESOLVER_LOG_LEVEL_INF Info
CONFIG_DNS_RESOLVER_LOG_LEVEL_OFF Off
CONFIG_DNS_RESOLVER_LOG_LEVEL_WRN Warning
CONFIG_DNS_RESOLVER_MAX_SERVERS Number of DNS server addresses
CONFIG_DNS_SERVER1 DNS server 1
CONFIG_DNS_SERVER2 DNS server 2
CONFIG_DNS_SERVER3 DNS server 3
CONFIG_DNS_SERVER4 DNS server 4
CONFIG_DNS_SERVER5 DNS server 5
CONFIG_DNS_SERVER_IP_ADDRESSES Set DNS server IP addresses
CONFIG_DUMMY_DISPLAY Dummy display driver
CONFIG_DUMMY_DISPLAY_DEV_NAME Dummy display device name
CONFIG_DUMMY_DISPLAY_X_RES X resolution for dummy display
CONFIG_DUMMY_DISPLAY_Y_RES Y resolution for dummy display
CONFIG_DW_ICTL Designware Interrupt Controller
CONFIG_DW_ICTL_INIT_PRIORITY Init priority for DW interrupt controller
CONFIG_DW_ICTL_NAME Name for Designware Interrupt Controller
CONFIG_DW_ICTL_OFFSET Parent interrupt number to which DW_ICTL maps
CONFIG_DW_ISR_TBL_OFFSET Offset in the SW ISR Table
CONFIG_DYNAMIC_INTERRUPTS Enable installation of IRQs at runtime
CONFIG_DYNAMIC_OBJECTS Allow kernel objects to be allocated at runtime
CONFIG_EAGER_FP_SHARING  
CONFIG_EARLY_CONSOLE Send stdout at the earliest stage possible
CONFIG_ENABLE_EXTENDED_IBRS Enable Extended IBRS
CONFIG_ENABLE_HID_INT_OUT_EP Enable USB HID Device Interrupt OUT Endpoint
CONFIG_ENS210 ENS210 Digital Temperature and Humidity sensor
CONFIG_ENS210_CRC_CHECK Enable CRC Check
CONFIG_ENS210_MAX_READ_RETRIES Number of value reading retries
CONFIG_ENS210_MAX_STAT_RETRIES Number of status read retries
CONFIG_ENTROPY_CC13XX_CC26XX_ALARM_THRESHOLD Threshold for detected repeated patterns
CONFIG_ENTROPY_CC13XX_CC26XX_POOL_SIZE Number of bytes in the entropy pool
CONFIG_ENTROPY_CC13XX_CC26XX_RNG TI SimpleLink CC13xx / CC26xx True Random Number Generator (TRNG)
CONFIG_ENTROPY_CC13XX_CC26XX_SAMPLES_PER_CYCLE Number of samples to generate entropy
CONFIG_ENTROPY_CC13XX_CC26XX_SHUTDOWN_THRESHOLD Threshold for the number of FROs automatically shut down
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR Use entropy driver to generate random numbers
CONFIG_ENTROPY_ESP32_RNG ESP32 entropy number generator driver
CONFIG_ENTROPY_GENERATOR Entropy Drivers
CONFIG_ENTROPY_HAS_DRIVER  
CONFIG_ENTROPY_MCUX_RNGA MCUX RNGA driver
CONFIG_ENTROPY_MCUX_TRNG MCUX TRNG driver
CONFIG_ENTROPY_NAME Entropy Device Name
CONFIG_ENTROPY_NRF5_BIAS_CORRECTION Enable bias correction (uniform distribution)
CONFIG_ENTROPY_NRF5_ISR_POOL_SIZE ISR-mode random number pool size
CONFIG_ENTROPY_NRF5_ISR_THRESHOLD ISR-mode random number pool low-water threshold
CONFIG_ENTROPY_NRF5_PRI RNG interrupt priority
CONFIG_ENTROPY_NRF5_RNG nRF5 RNG driver
CONFIG_ENTROPY_NRF5_THR_POOL_SIZE Thread-mode random number pool size
CONFIG_ENTROPY_NRF5_THR_THRESHOLD Thread-mode random number pool low-water threshold
CONFIG_ENTROPY_NRF_FORCE_ALT  
CONFIG_ENTROPY_SAM_RNG Atmel SAM MCU Family True Random Number Generator (TRNG) Driver
CONFIG_ENTROPY_STM32_RNG STM32 RNG driver
CONFIG_ERRNO Enable errno support
CONFIG_ESPI ESPI Driver
CONFIG_ESPI_FLASH_CHANNEL ESPI flash channel
CONFIG_ESPI_INIT_PRIORITY IRQ Priority for ESPI Controller
CONFIG_ESPI_LOG_LEVEL  
CONFIG_ESPI_LOG_LEVEL_DBG Debug
CONFIG_ESPI_LOG_LEVEL_ERR Error
CONFIG_ESPI_LOG_LEVEL_INF Info
CONFIG_ESPI_LOG_LEVEL_OFF Off
CONFIG_ESPI_LOG_LEVEL_WRN Warning
CONFIG_ESPI_OOB_CHANNEL eSPI Out-of-band channel
CONFIG_ESPI_PERIPHERAL_8042_KEYBOARD 8042 keyboard peripheral
CONFIG_ESPI_PERIPHERAL_CHANNEL eSPI peripheral channel
CONFIG_ESPI_PERIPHERAL_DEBUG_PORT_80 Debug Port 80 peripheral
CONFIG_ESPI_PERIPHERAL_HOST_IO Host I/O peripheral
CONFIG_ESPI_PERIPHERAL_PORT_92 Legacy Port 92 peripheral
CONFIG_ESPI_PERIPHERAL_UART UART peripheral
CONFIG_ESPI_SLAVE ESPI slave driver
CONFIG_ESPI_VWIRE_CHANNEL eSPI virtual wire channel
CONFIG_ESPI_XEC XEC Microchip ESPI driver / Enable ESPI IO device
CONFIG_ETHERNET_LOG_LEVEL  
CONFIG_ETHERNET_LOG_LEVEL_DBG Debug
CONFIG_ETHERNET_LOG_LEVEL_DEFAULT Default
CONFIG_ETHERNET_LOG_LEVEL_ERR Error
CONFIG_ETHERNET_LOG_LEVEL_INF Info
CONFIG_ETHERNET_LOG_LEVEL_OFF Off
CONFIG_ETHERNET_LOG_LEVEL_WRN Warning
CONFIG_ETH_DW Synopsys DesignWare Ethernet driver
CONFIG_ETH_DW_0 Synopsys DesignWare Ethernet port 0
CONFIG_ETH_DW_0_IRQ_DIRECT Direct Hardware Interrupt
CONFIG_ETH_DW_0_IRQ_PRI Controller interrupt priority
CONFIG_ETH_DW_0_IRQ_SHARED Shared IRQ
CONFIG_ETH_DW_0_NAME Driver name
CONFIG_ETH_DW_SHARED_IRQ  
CONFIG_ETH_E1000 Intel(R) PRO/1000 Gigabit Ethernet driver
CONFIG_ETH_ENC28J60 ENC28J60C Ethernet Controller
CONFIG_ETH_ENC28J60_0 ENC28J60C Ethernet port 0
CONFIG_ETH_ENC28J60_0_FULL_DUPLEX ENC28J60 full duplex
CONFIG_ETH_ENC28J60_0_GPIO_SPI_CS Manage SPI CS through a GPIO pin
CONFIG_ETH_ENC28J60_RX_THREAD_PRIO Priority for internal incoming packet handler
CONFIG_ETH_ENC28J60_RX_THREAD_STACK_SIZE Stack size for internal incoming packet handler
CONFIG_ETH_ENC28J60_TIMEOUT IP buffer timeout
CONFIG_ETH_INIT_PRIORITY Ethernet driver init priority
CONFIG_ETH_LITEETH LiteEth Ethernet core driver
CONFIG_ETH_LITEETH_0 LiteEth Ethernet port 0
CONFIG_ETH_LITEETH_0_IRQ_PRI LiteEth interrupt priority
CONFIG_ETH_LITEETH_0_RANDOM_MAC Random MAC address
CONFIG_ETH_MCUX MCUX Ethernet driver
CONFIG_ETH_MCUX_0 MCUX Ethernet port 0
CONFIG_ETH_MCUX_0_MANUAL_MAC Manual MAC address
CONFIG_ETH_MCUX_0_RANDOM_MAC Random MAC address
CONFIG_ETH_MCUX_0_UNIQUE_MAC Stable MAC address
CONFIG_ETH_MCUX_PHY_EXTRA_DEBUG Enable additional detailed PHY debug
CONFIG_ETH_MCUX_PHY_TICK_MS PHY poll period (ms)
CONFIG_ETH_MCUX_PROMISCUOUS_MODE Enable promiscuous mode
CONFIG_ETH_MCUX_PTP_CLOCK_SRC_HZ Frequency of the clock source for the PTP timer
CONFIG_ETH_MCUX_PTP_RX_BUFFERS Size of the RX timestamp ring buffer
CONFIG_ETH_MCUX_PTP_TX_BUFFERS Size of the TX timestamp ring buffer
CONFIG_ETH_MCUX_RX_BUFFERS Number of MCUX RX buffers
CONFIG_ETH_MCUX_TX_BUFFERS Number of MCUX TX buffers
CONFIG_ETH_NATIVE_POSIX Native Posix Ethernet driver
CONFIG_ETH_NATIVE_POSIX_DEV_NAME Host ethernet TUN/TAP device name
CONFIG_ETH_NATIVE_POSIX_DRV_NAME Ethernet driver name
CONFIG_ETH_NATIVE_POSIX_MAC_ADDR MAC address for the interface
CONFIG_ETH_NATIVE_POSIX_PTP_CLOCK PTP clock driver support
CONFIG_ETH_NATIVE_POSIX_RANDOM_MAC Random MAC address
CONFIG_ETH_NATIVE_POSIX_SETUP_SCRIPT Host setup script
CONFIG_ETH_NATIVE_POSIX_STARTUP_AUTOMATIC Start network interface automatically
CONFIG_ETH_NATIVE_POSIX_STARTUP_SCRIPT Host startup script
CONFIG_ETH_NATIVE_POSIX_STARTUP_SCRIPT_USER Username to run the host startup script
CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP Strip VLAN tag from Rx frames
CONFIG_ETH_NIC_MODEL  
CONFIG_ETH_SAM_GMAC Atmel SAM Ethernet driver
CONFIG_ETH_SAM_GMAC_BUF_RX_COUNT Network RX buffers preallocated by the SAM ETH driver
CONFIG_ETH_SAM_GMAC_FORCED_QUEUE Queue to force the packets to
CONFIG_ETH_SAM_GMAC_FORCE_QUEUE Force all traffic to be routed through a specific queue
CONFIG_ETH_SAM_GMAC_IRQ_PRI Interrupt priority
CONFIG_ETH_SAM_GMAC_MAC0 MAC Address Byte 0
CONFIG_ETH_SAM_GMAC_MAC1 MAC Address Byte 1
CONFIG_ETH_SAM_GMAC_MAC2 MAC Address Byte 2
CONFIG_ETH_SAM_GMAC_MAC3 MAC Address Byte 3
CONFIG_ETH_SAM_GMAC_MAC4 MAC Address Byte 4
CONFIG_ETH_SAM_GMAC_MAC5 MAC Address Byte 5
CONFIG_ETH_SAM_GMAC_MAC_I2C_DEV_NAME I2C bus driver device name
CONFIG_ETH_SAM_GMAC_MAC_I2C_EEPROM Read from an I2C EEPROM
CONFIG_ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS I2C EEPROM internal address
CONFIG_ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS_SIZE I2C EEPROM internal address size
CONFIG_ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS I2C 7-bit EEPROM chip address
CONFIG_ETH_SAM_GMAC_MAC_MANUAL Manual
CONFIG_ETH_SAM_GMAC_MII MII
CONFIG_ETH_SAM_GMAC_NAME Device name
CONFIG_ETH_SAM_GMAC_PHY_ADDR GMAC PHY Address
CONFIG_ETH_SAM_GMAC_QUEUES Number of hardware TX and RX queues
CONFIG_ETH_SAM_GMAC_RANDOM_MAC Random MAC address
CONFIG_ETH_SAM_GMAC_RMII RMII
CONFIG_ETH_SMSC911X SMSC911x/9220 Ethernet driver
CONFIG_ETH_STELLARIS Enable TI Stellaris MCU family ethernet driver.
CONFIG_ETH_STM32_HAL STM32 HAL Ethernet driver
CONFIG_ETH_STM32_HAL_IRQ_PRI Controller interrupt priority
CONFIG_ETH_STM32_HAL_MAC3 MAC Address Byte 3
CONFIG_ETH_STM32_HAL_MAC4 MAC Address Byte 4
CONFIG_ETH_STM32_HAL_MAC5 MAC Address Byte 5
CONFIG_ETH_STM32_HAL_MII Use MII interface
CONFIG_ETH_STM32_HAL_NAME Device name
CONFIG_ETH_STM32_HAL_PHY_ADDRESS Phy address
CONFIG_ETH_STM32_HAL_RANDOM_MAC Random MAC address
CONFIG_ETH_STM32_HAL_RX_THREAD_PRIO RX thread priority
CONFIG_ETH_STM32_HAL_RX_THREAD_STACK_SIZE RX thread stack size
CONFIG_ETH_STM32_HAL_USE_DTCM_FOR_DMA_BUFFER Use DTCM for DMA buffers
CONFIG_EXCEPTIONS Enable C++ exceptions support
CONFIG_EXCEPTION_DEBUG Unhandled exception debugging
CONFIG_EXCEPTION_STACK_TRACE Attempt to print stack traces upon exceptions
CONFIG_EXECUTE_XOR_WRITE Enable W^X for memory partitions
CONFIG_EXECUTION_BENCHMARKING Timing metrics
CONFIG_EXTI_STM32 External Interrupt/Event Controller (EXTI) Driver for STM32 family of MCUs
CONFIG_EXTI_STM32_EXTI0_IRQ_PRI EXTI0 IRQ priority
CONFIG_EXTI_STM32_EXTI10_IRQ_PRI EXTI10 IRQ priority
CONFIG_EXTI_STM32_EXTI11_IRQ_PRI EXTI11 IRQ priority
CONFIG_EXTI_STM32_EXTI12_IRQ_PRI EXTI12 IRQ priority
CONFIG_EXTI_STM32_EXTI13_IRQ_PRI EXTI13 IRQ priority
CONFIG_EXTI_STM32_EXTI14_IRQ_PRI EXTI14 IRQ priority
CONFIG_EXTI_STM32_EXTI15_10_IRQ_PRI EXTI15:10 IRQ priority
CONFIG_EXTI_STM32_EXTI15_4_IRQ_PRI EXTI15:4 IRQ priority
CONFIG_EXTI_STM32_EXTI15_IRQ_PRI EXTI15 IRQ priority
CONFIG_EXTI_STM32_EXTI1_0_IRQ_PRI EXTI1:0 IRQ priority
CONFIG_EXTI_STM32_EXTI1_IRQ_PRI EXTI1 IRQ priority
CONFIG_EXTI_STM32_EXTI2_IRQ_PRI EXTI2 IRQ priority
CONFIG_EXTI_STM32_EXTI3_2_IRQ_PRI EXTI3:2 IRQ priority
CONFIG_EXTI_STM32_EXTI3_IRQ_PRI EXTI3 IRQ priority
CONFIG_EXTI_STM32_EXTI4_IRQ_PRI EXTI4 IRQ priority
CONFIG_EXTI_STM32_EXTI5_IRQ_PRI EXTI5 IRQ priority
CONFIG_EXTI_STM32_EXTI6_IRQ_PRI EXTI6 IRQ priority
CONFIG_EXTI_STM32_EXTI7_IRQ_PRI EXTI7 IRQ priority
CONFIG_EXTI_STM32_EXTI8_IRQ_PRI EXTI8 IRQ priority
CONFIG_EXTI_STM32_EXTI9_5_IRQ_PRI EXTI9:5 IRQ priority
CONFIG_EXTI_STM32_EXTI9_IRQ_PRI EXTI9 IRQ priority
CONFIG_EXTI_STM32_LPTIM1_IRQ_PRI LPTIM1 IRQ priority
CONFIG_EXTI_STM32_OTG_FS_WKUP_IRQ_PRI USB OTG FS Wake Up IRQ priority
CONFIG_EXTI_STM32_PVD_IRQ_PRI RVD Through IRQ priority
CONFIG_EXTI_STM32_RTC_WKUP_IRQ_PRI RTC Wake Up IRQ priority
CONFIG_EXTI_STM32_TAMP_STAMP_IRQ_PRI Tamper and Timestamp IRQ priority
CONFIG_EXTRA_EXCEPTION_INFO Extra exception debug information
CONFIG_FAKE_ENTROPY_NATIVE_POSIX Native posix entropy driver
CONFIG_FAT_FILESYSTEM_ELM ELM FAT File System
CONFIG_FAULT_DUMP Fault dump level / Fault dump level
CONFIG_FCB Flash Circular Buffer support
CONFIG_FILE_SYSTEM File system support
CONFIG_FILE_SYSTEM_LITTLEFS LittleFS file system support
CONFIG_FILE_SYSTEM_NFFS NFFS file system support
CONFIG_FILE_SYSTEM_SHELL Enable file system shell
CONFIG_FLASH Flash hardware support
CONFIG_FLASH_BASE_ADDRESS Flash Base Address
CONFIG_FLASH_HAS_DRIVER_ENABLED  
CONFIG_FLASH_HAS_PAGE_LAYOUT  
CONFIG_FLASH_LOAD_OFFSET Kernel load offset
CONFIG_FLASH_LOAD_SIZE Kernel load size
CONFIG_FLASH_LOG_LEVEL  
CONFIG_FLASH_LOG_LEVEL_DBG Debug
CONFIG_FLASH_LOG_LEVEL_ERR Error
CONFIG_FLASH_LOG_LEVEL_INF Info
CONFIG_FLASH_LOG_LEVEL_OFF Off
CONFIG_FLASH_LOG_LEVEL_WRN Warning
CONFIG_FLASH_MAP Flash map abstraction module
CONFIG_FLASH_MAP_CUSTOM Custom flash map description
CONFIG_FLASH_MAP_SHELL Enable flash map shell interface
CONFIG_FLASH_NATIVE_POSIX Native POSIX Flash driver
CONFIG_FLASH_NATIVE_POSIX_SECTOR_SIZE Sector size
CONFIG_FLASH_NRF_FORCE_ALT  
CONFIG_FLASH_PAGE_LAYOUT API for retrieving the layout of pages
CONFIG_FLASH_SHELL Enable Flash shell
CONFIG_FLASH_SIMULATOR Flash simulator
CONFIG_FLASH_SIMULATOR_DOUBLE_WRITES Allow program units to be programmed more than once
CONFIG_FLASH_SIMULATOR_ERASE_PROTECT Enable erase protection on write protection
CONFIG_FLASH_SIMULATOR_MIN_ERASE_TIME_US Minimum erase time (µS)
CONFIG_FLASH_SIMULATOR_MIN_READ_TIME_US Minimum read time (µS)
CONFIG_FLASH_SIMULATOR_MIN_WRITE_TIME_US Minimum write time (µS)
CONFIG_FLASH_SIMULATOR_SIMULATE_TIMING Enable hardware timing simulation
CONFIG_FLASH_SIMULATOR_STAT_PAGE_COUNT Pages under statistic
CONFIG_FLASH_SIMULATOR_UNALIGNED_READ Allow read access to be unaligned
CONFIG_FLASH_SIZE Flash Size in kB
CONFIG_FLEXPWM1_PWM0 NXP MCUX FLEXPWM1_PWM0 Output
CONFIG_FLEXPWM1_PWM1 NXP MCUX FLEXPWM1_PWM1 Output
CONFIG_FLEXPWM1_PWM2 NXP MCUX FLEXPWM1_PWM2 Output
CONFIG_FLEXPWM1_PWM3 NXP MCUX FLEXPWM1_PWM3 Output
CONFIG_FLEXPWM2_PWM0 NXP MCUX FLEXPWM2_PWM0 Output
CONFIG_FLEXPWM2_PWM1 NXP MCUX FLEXPWM2_PWM1 Output
CONFIG_FLEXPWM2_PWM2 NXP MCUX FLEXPWM2_PWM2 Output
CONFIG_FLEXPWM2_PWM3 NXP MCUX FLEXPWM2_PWM3 Output
CONFIG_FLEXPWM3_PWM0 NXP MCUX FLEXPWM3_PWM0 Output
CONFIG_FLEXPWM3_PWM1 NXP MCUX FLEXPWM3_PWM1 Output
CONFIG_FLEXPWM3_PWM2 NXP MCUX FLEXPWM3_PWM2 Output
CONFIG_FLEXPWM3_PWM3 NXP MCUX FLEXPWM3_PWM3 Output
CONFIG_FLEXPWM4_PWM0 NXP MCUX FLEXPWM4_PWM0 Output
CONFIG_FLEXPWM4_PWM1 NXP MCUX FLEXPWM4_PWM1 Output
CONFIG_FLEXPWM4_PWM2 NXP MCUX FLEXPWM4_PWM2 Output
CONFIG_FLEXPWM4_PWM3 NXP MCUX FLEXPWM4_PWM3 Output
CONFIG_FLOAT Floating point
CONFIG_FNMATCH Fnmatch Support
CONFIG_FORCE_NO_ASSERT Force-disable no assertions
CONFIG_FP_FPU_DA  
CONFIG_FP_HARDABI Floating point Hard ABI
CONFIG_FP_SHARING Floating point register sharing
CONFIG_FP_SOFTABI Floating point Soft ABI
CONFIG_FRAMEBUF_DISPLAY  
CONFIG_FS_FATFS_NUM_DIRS Maximum number of opened directories
CONFIG_FS_FATFS_NUM_FILES Maximum number of opened files
CONFIG_FS_LITTLEFS_BLOCK_CYCLES Number of erase cycles before moving data to another block
CONFIG_FS_LITTLEFS_CACHE_SIZE Size of block caches in bytes
CONFIG_FS_LITTLEFS_FC_MEM_POOL Enable flexible file cache sizes for littlefs
CONFIG_FS_LITTLEFS_FC_MEM_POOL_MAX_SIZE Maximum block size for littlefs file cache memory pool
CONFIG_FS_LITTLEFS_FC_MEM_POOL_MIN_SIZE Minimum block size for littlefs file cache memory pool
CONFIG_FS_LITTLEFS_FC_MEM_POOL_NUM_BLOCKS Number of maximum sized blocks in littlefs file cache memory pool
CONFIG_FS_LITTLEFS_LOOKAHEAD_SIZE Size of lookahead buffer in bytes
CONFIG_FS_LITTLEFS_NUM_DIRS Maximum number of opened directories
CONFIG_FS_LITTLEFS_NUM_FILES Maximum number of opened files
CONFIG_FS_LITTLEFS_PROG_SIZE Minimum size of a block program
CONFIG_FS_LITTLEFS_READ_SIZE Minimum size of a block read
CONFIG_FS_LOG_LEVEL  
CONFIG_FS_LOG_LEVEL_DBG Debug
CONFIG_FS_LOG_LEVEL_ERR Error
CONFIG_FS_LOG_LEVEL_INF Info
CONFIG_FS_LOG_LEVEL_OFF Off
CONFIG_FS_LOG_LEVEL_WRN Warning
CONFIG_FS_MGMT_DL_CHUNK_SIZE Maximum chunk size for file downloads
CONFIG_FS_MGMT_PATH_SIZE Maximum file path length
CONFIG_FS_MGMT_UL_CHUNK_SIZE Maximum chunk size for file uploads
CONFIG_FS_NFFS_FLASH_DEV_NAME Flash device name to be used
CONFIG_FS_NFFS_NUM_BLOCKS Maximum number of blocks
CONFIG_FS_NFFS_NUM_CACHE_BLOCKS Number of cached blocks
CONFIG_FS_NFFS_NUM_CACHE_INODES Number of cached files’ inodes
CONFIG_FS_NFFS_NUM_DIRS Maximum number of opened directories
CONFIG_FS_NFFS_NUM_FILES Maximum number of opened files
CONFIG_FS_NFFS_NUM_INODES Maximum number of inodes
CONFIG_FUSE_FS_ACCESS Enable FUSE based access to file system partitions
CONFIG_FXAS21002 FXAS21002 gyroscope driver
CONFIG_FXAS21002_DR Output data rate
CONFIG_FXAS21002_DRDY_INT1 Data ready interrupt to INT1 pin
CONFIG_FXAS21002_RANGE Full scale range
CONFIG_FXAS21002_THREAD_PRIORITY Own thread priority
CONFIG_FXAS21002_THREAD_STACK_SIZE Own thread stack size
CONFIG_FXAS21002_TRIGGER  
CONFIG_FXAS21002_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_FXAS21002_TRIGGER_NONE No trigger
CONFIG_FXAS21002_TRIGGER_OWN_THREAD Use own thread
CONFIG_FXAS21002_WHOAMI WHOAMI value
CONFIG_FXOS8700 FXOS8700 accelerometer/magnetometer driver
CONFIG_FXOS8700_DRDY_INT1 Data ready interrupt to INT1 pin
CONFIG_FXOS8700_MODE_ACCEL Accelerometer-only mode
CONFIG_FXOS8700_MODE_HYBRID Hybrid (accel+mag) mode
CONFIG_FXOS8700_MODE_MAGN Magnetometer-only mode
CONFIG_FXOS8700_MOTION Motion detection
CONFIG_FXOS8700_MOTION_INT1 Motion interrupt to INT1 pin
CONFIG_FXOS8700_PM_HIGH_RESOLUTION High resolution power mode
CONFIG_FXOS8700_PM_LOW_NOISE_LOW_POWER Low noise low power mode
CONFIG_FXOS8700_PM_LOW_POWER Low power mode
CONFIG_FXOS8700_PM_NORMAL Normal power mode
CONFIG_FXOS8700_PULSE Pulse detection
CONFIG_FXOS8700_PULSE_CFG Pulse configuration register
CONFIG_FXOS8700_PULSE_INT1 Pulse interrupt to INT1 pin
CONFIG_FXOS8700_PULSE_LTCY Pulse latency
CONFIG_FXOS8700_PULSE_THSX Pulse X-axis threshold
CONFIG_FXOS8700_PULSE_THSY Pulse Y-axis threshold
CONFIG_FXOS8700_PULSE_THSZ Pulse Z-axis threshold
CONFIG_FXOS8700_PULSE_TMLT Pulse time limit
CONFIG_FXOS8700_PULSE_WIND Pulse window
CONFIG_FXOS8700_RANGE_2G 2g (0.244 mg/LSB)
CONFIG_FXOS8700_RANGE_4G 4g (0.488 mg/LSB)
CONFIG_FXOS8700_RANGE_8G 8g (0.976 mg/LSB)
CONFIG_FXOS8700_TEMP Enable temperature
CONFIG_FXOS8700_THREAD_PRIORITY Own thread priority
CONFIG_FXOS8700_THREAD_STACK_SIZE Own thread stack size
CONFIG_FXOS8700_TRIGGER  
CONFIG_FXOS8700_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_FXOS8700_TRIGGER_NONE No trigger
CONFIG_FXOS8700_TRIGGER_OWN_THREAD Use own thread
CONFIG_GDT_DYNAMIC Store GDT in RAM so that it can be modified
CONFIG_GEN_IRQ_START_VECTOR  
CONFIG_GEN_IRQ_VECTOR_TABLE Generate an interrupt vector table
CONFIG_GEN_ISR_TABLES Use generated IRQ tables
CONFIG_GEN_SW_ISR_TABLE Generate a software ISR table
CONFIG_GIC ARM Generic Interrupt Controller (GIC)
CONFIG_GPIO GPIO Drivers
CONFIG_GPIO_ALTERA_NIOS2 Altera Nios-II PIO Controllers
CONFIG_GPIO_ALTERA_NIOS2_OUTPUT Enable driver for Altera Nios-II PIO Output Port
CONFIG_GPIO_ALTERA_NIOS2_OUTPUT_DEV_NAME Device name for Output Port
CONFIG_GPIO_AS_PINRESET GPIO as pin reset (reset button)
CONFIG_GPIO_ATMEL_SAM3 Atmel SAM3 PIO Controllers
CONFIG_GPIO_ATMEL_SAM3_PORTA Enable driver for Atmel SAM3 PIO Port A
CONFIG_GPIO_ATMEL_SAM3_PORTA_DEV_NAME Device name for Port A
CONFIG_GPIO_ATMEL_SAM3_PORTA_IRQ_PRI Interrupt Priority for Port A
CONFIG_GPIO_ATMEL_SAM3_PORTB Enable driver for Atmel SAM3 PIO Port B
CONFIG_GPIO_ATMEL_SAM3_PORTB_DEV_NAME Device name for Port B
CONFIG_GPIO_ATMEL_SAM3_PORTB_IRQ_PRI Interrupt Priority for Port B
CONFIG_GPIO_ATMEL_SAM3_PORTC Enable driver for Atmel SAM3 PIO Port C
CONFIG_GPIO_ATMEL_SAM3_PORTC_DEV_NAME Device name for Port C
CONFIG_GPIO_ATMEL_SAM3_PORTC_IRQ_PRI Interrupt Priority for Port C
CONFIG_GPIO_ATMEL_SAM3_PORTD Enable driver for Atmel SAM3 PIO Port D
CONFIG_GPIO_ATMEL_SAM3_PORTD_DEV_NAME Device name for Port D
CONFIG_GPIO_ATMEL_SAM3_PORTD_IRQ_PRI Interrupt Priority for Port D
CONFIG_GPIO_A_STELLARIS Enable GPIO port A support
CONFIG_GPIO_B_STELLARIS Enable GPIO port B support
CONFIG_GPIO_CC13XX_CC26XX TI SimpleLink CC13xx / CC26xx GPIO driver
CONFIG_GPIO_CC2650 TI CC2650 GPIO driver
CONFIG_GPIO_CC2650_INIT_PRIO GPIO driver initialization priority.
CONFIG_GPIO_CC2650_NAME GPIO driver name.
CONFIG_GPIO_CC32XX TI CC32XX GPIO driver
CONFIG_GPIO_CC32XX_A0 GPIO block A0
CONFIG_GPIO_CC32XX_A1 GPIO block A1
CONFIG_GPIO_CC32XX_A2 GPIO block A2
CONFIG_GPIO_CC32XX_A3 GPIO block A3
CONFIG_GPIO_CMSDK_AHB ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers
CONFIG_GPIO_CMSDK_AHB_PORT0 Enable driver for GPIO Port 0
CONFIG_GPIO_CMSDK_AHB_PORT0_DEV_NAME Device name for Port 0
CONFIG_GPIO_CMSDK_AHB_PORT0_IRQ_PRI Interrupt Priority for Port 0
CONFIG_GPIO_CMSDK_AHB_PORT1 Enable driver for GPIO Port 1
CONFIG_GPIO_CMSDK_AHB_PORT1_DEV_NAME Device name for Port 1
CONFIG_GPIO_CMSDK_AHB_PORT1_IRQ_PRI Interrupt Priority for Port 1
CONFIG_GPIO_CMSDK_AHB_PORT2 Enable driver for GPIO Port 2
CONFIG_GPIO_CMSDK_AHB_PORT2_DEV_NAME Device name for Port 2
CONFIG_GPIO_CMSDK_AHB_PORT2_IRQ_PRI Interrupt Priority for Port 2
CONFIG_GPIO_CMSDK_AHB_PORT3 Enable driver for GPIO Port 3
CONFIG_GPIO_CMSDK_AHB_PORT3_DEV_NAME Device name for Port 3
CONFIG_GPIO_CMSDK_AHB_PORT3_IRQ_PRI Interrupt Priority for Port 3
CONFIG_GPIO_C_STELLARIS Enable GPIO port C support
CONFIG_GPIO_DW Designware GPIO
CONFIG_GPIO_DW_0 Designware GPIO block 0
CONFIG_GPIO_DW_0_CLOCK_GATE_SUBSYS Clock controller’s subsystem
CONFIG_GPIO_DW_0_IRQ_DIRECT Direct Hardware Interrupt
CONFIG_GPIO_DW_0_IRQ_PRI Controller interrupt priority
CONFIG_GPIO_DW_0_IRQ_SHARED Shared IRQ
CONFIG_GPIO_DW_0_NAME Driver name
CONFIG_GPIO_DW_1 Designware GPIO block 1
CONFIG_GPIO_DW_1_CLOCK_GATE_SUBSYS Clock controller’s subsystem
CONFIG_GPIO_DW_1_IRQ_DIRECT Direct Hardware Interrupt
CONFIG_GPIO_DW_1_IRQ_PRI Controller interrupt priority
CONFIG_GPIO_DW_1_IRQ_SHARED Shared IRQ
CONFIG_GPIO_DW_1_NAME Driver name
CONFIG_GPIO_DW_2 Designware GPIO block 1
CONFIG_GPIO_DW_2_CLOCK_GATE_SUBSYS Clock controller’s subsystem
CONFIG_GPIO_DW_2_IRQ_DIRECT Direct Hardware Interrupt
CONFIG_GPIO_DW_2_IRQ_PRI Controller interrupt priority
CONFIG_GPIO_DW_2_IRQ_SHARED Shared IRQ
CONFIG_GPIO_DW_2_NAME Driver name
CONFIG_GPIO_DW_3 Designware GPIO block 1
CONFIG_GPIO_DW_3_CLOCK_GATE_SUBSYS Clock controller’s subsystem
CONFIG_GPIO_DW_3_IRQ_DIRECT Direct Hardware Interrupt
CONFIG_GPIO_DW_3_IRQ_PRI Controller interrupt priority
CONFIG_GPIO_DW_3_IRQ_SHARED Shared IRQ
CONFIG_GPIO_DW_3_NAME Driver name
CONFIG_GPIO_DW_CLOCK_GATE Enable clock gating
CONFIG_GPIO_DW_CLOCK_GATE_DRV_NAME  
CONFIG_GPIO_DW_INIT_PRIORITY Init priority
CONFIG_GPIO_DW_SHARED_IRQ  
CONFIG_GPIO_D_STELLARIS Enable GPIO port D support
CONFIG_GPIO_ESP32 ESP32 GPIO
CONFIG_GPIO_ESP32_0 ESP32 GPIO (pins 0-31)
CONFIG_GPIO_ESP32_0_NAME Driver name
CONFIG_GPIO_ESP32_1 ESP32 GPIO (pins 32-39)
CONFIG_GPIO_ESP32_1_NAME Driver name
CONFIG_GPIO_ESP32_IRQ IRQ line for ESP32 GPIO pins
CONFIG_GPIO_E_STELLARIS Enable GPIO port E support
CONFIG_GPIO_F_STELLARIS Enable GPIO port F support
CONFIG_GPIO_GECKO Gecko GPIO driver
CONFIG_GPIO_GECKO_COMMON_INIT_PRIORITY Common initialization priority
CONFIG_GPIO_GECKO_PORTA Port A
CONFIG_GPIO_GECKO_PORTB Port B
CONFIG_GPIO_GECKO_PORTC Port C
CONFIG_GPIO_GECKO_PORTD Port D
CONFIG_GPIO_GECKO_PORTE Port E
CONFIG_GPIO_GECKO_PORTF Port F
CONFIG_GPIO_G_STELLARIS Enable GPIO port G support
CONFIG_GPIO_HT16K33 HT16K33 keyscan driver
CONFIG_GPIO_HT16K33_INIT_PRIORITY Driver init priority
CONFIG_GPIO_IMX IMX GPIO driver
CONFIG_GPIO_IMX_PORT_1 Port 1
CONFIG_GPIO_IMX_PORT_2 Port 2
CONFIG_GPIO_IMX_PORT_3 Port 3
CONFIG_GPIO_IMX_PORT_4 Port 4
CONFIG_GPIO_IMX_PORT_5 Port 5
CONFIG_GPIO_IMX_PORT_6 Port 6
CONFIG_GPIO_IMX_PORT_7 Port 7
CONFIG_GPIO_INTEL_APL Intel Apollo Lake SoC GPIO
CONFIG_GPIO_INTEL_APL_CHECK_PERMS Check permissions before manipulating GPIO
CONFIG_GPIO_LOG_LEVEL  
CONFIG_GPIO_LOG_LEVEL_DBG Debug
CONFIG_GPIO_LOG_LEVEL_ERR Error
CONFIG_GPIO_LOG_LEVEL_INF Info
CONFIG_GPIO_LOG_LEVEL_OFF Off
CONFIG_GPIO_LOG_LEVEL_WRN Warning
CONFIG_GPIO_MCUX MCUX GPIO driver
CONFIG_GPIO_MCUX_IGPIO MCUX IGPIO driver
CONFIG_GPIO_MCUX_IGPIO_1 Port 1
CONFIG_GPIO_MCUX_IGPIO_2 Port 2
CONFIG_GPIO_MCUX_IGPIO_3 Port 3
CONFIG_GPIO_MCUX_IGPIO_4 Port 4
CONFIG_GPIO_MCUX_IGPIO_5 Port 5
CONFIG_GPIO_MCUX_LPC MCUX LPC GPIO driver
CONFIG_GPIO_MCUX_LPC_PORT0 Port 0
CONFIG_GPIO_MCUX_LPC_PORT0_NAME Port 0 driver name
CONFIG_GPIO_MCUX_LPC_PORT1 Port 1
CONFIG_GPIO_MCUX_LPC_PORT1_NAME Port 1 driver name
CONFIG_GPIO_MCUX_PORTA Port A
CONFIG_GPIO_MCUX_PORTB Port B
CONFIG_GPIO_MCUX_PORTC Port C
CONFIG_GPIO_MCUX_PORTD Port D
CONFIG_GPIO_MCUX_PORTE Port E
CONFIG_GPIO_MMIO32  
CONFIG_GPIO_NRFX nRF GPIO driver
CONFIG_GPIO_NRF_INIT_PRIORITY nRF GPIO initialization priority
CONFIG_GPIO_NRF_P0 nRF GPIO Port P0
CONFIG_GPIO_NRF_P1 nRF GPIO Port P1
CONFIG_GPIO_PCAL9535A PCAL9535A I2C-based GPIO chip
CONFIG_GPIO_PCAL9535A_0 PCAL9535A GPIO chip #0
CONFIG_GPIO_PCAL9535A_0_DEV_NAME PCAL9535A GPIO chip #0 Device Name
CONFIG_GPIO_PCAL9535A_0_I2C_ADDR PCAL9535A GPIO chip #0 I2C slave address
CONFIG_GPIO_PCAL9535A_0_I2C_MASTER_DEV_NAME I2C Master where PCAL9535A GPIO chip #0 is connected
CONFIG_GPIO_PCAL9535A_1 PCAL9535A GPIO chip #1
CONFIG_GPIO_PCAL9535A_1_DEV_NAME PCAL9535A GPIO chip #1 Device Name
CONFIG_GPIO_PCAL9535A_1_I2C_ADDR PCAL9535A GPIO chip #1 I2C slave address
CONFIG_GPIO_PCAL9535A_1_I2C_MASTER_DEV_NAME I2C Master where PCAL9535A GPIO chip #1 is connected
CONFIG_GPIO_PCAL9535A_2 PCAL9535A GPIO chip #2
CONFIG_GPIO_PCAL9535A_2_DEV_NAME PCAL9535A GPIO chip #2 Device Name
CONFIG_GPIO_PCAL9535A_2_I2C_ADDR PCAL9535A GPIO chip #2 I2C slave address
CONFIG_GPIO_PCAL9535A_2_I2C_MASTER_DEV_NAME I2C Master where PCAL9535A GPIO chip #2 is connected
CONFIG_GPIO_PCAL9535A_3 PCAL9535A GPIO chip #3
CONFIG_GPIO_PCAL9535A_3_DEV_NAME PCAL9535A GPIO chip #3 Device Name
CONFIG_GPIO_PCAL9535A_3_I2C_ADDR PCAL9535A GPIO chip #3 I2C slave address
CONFIG_GPIO_PCAL9535A_3_I2C_MASTER_DEV_NAME I2C Master where PCAL9535A GPIO chip #3 is connected
CONFIG_GPIO_PCAL9535A_INIT_PRIORITY Init priority
CONFIG_GPIO_QMSI QMSI GPIO driver
CONFIG_GPIO_QMSI_0 QMSI GPIO block 0
CONFIG_GPIO_QMSI_1 QMSI GPIO block 1
CONFIG_GPIO_QMSI_API_REENTRANCY GPIO driver API reentrancy
CONFIG_GPIO_QMSI_INIT_PRIORITY Init priority
CONFIG_GPIO_QMSI_SS QMSI GPIO SS driver
CONFIG_GPIO_QMSI_SS_0 QMSI GPIO SS block 0
CONFIG_GPIO_QMSI_SS_1 QMSI GPIO SS block 1
CONFIG_GPIO_RV32M1 RV32M1 GPIO driver
CONFIG_GPIO_RV32M1_PORTA Port A
CONFIG_GPIO_RV32M1_PORTB Port B
CONFIG_GPIO_RV32M1_PORTC Port C
CONFIG_GPIO_RV32M1_PORTD Port D
CONFIG_GPIO_RV32M1_PORTE Port E
CONFIG_GPIO_SAM Atmel SAM GPIO (PORT) driver
CONFIG_GPIO_SAM0 Atmel SAM0 GPIO (PORT) driver
CONFIG_GPIO_SCH Intel SCH GPIO controller
CONFIG_GPIO_SCH_0 Enable SCH GPIO port 0
CONFIG_GPIO_SCH_0_DEV_NAME Name of the device
CONFIG_GPIO_SCH_1 Enable SCH GPIO port 1
CONFIG_GPIO_SCH_1_DEV_NAME Name of the device
CONFIG_GPIO_SCH_INIT_PRIORITY Init priority
CONFIG_GPIO_SHELL Enable GPIO Shell
CONFIG_GPIO_SIFIVE SiFive Freedom Processor GPIO driver
CONFIG_GPIO_SIFIVE_0_PRIORITY GPIO 0 interrupt priority
CONFIG_GPIO_SIFIVE_10_PRIORITY GPIO 10 interrupt priority
CONFIG_GPIO_SIFIVE_11_PRIORITY GPIO 11 interrupt priority
CONFIG_GPIO_SIFIVE_12_PRIORITY GPIO 12 interrupt priority
CONFIG_GPIO_SIFIVE_13_PRIORITY GPIO 13 interrupt priority
CONFIG_GPIO_SIFIVE_14_PRIORITY GPIO 14 interrupt priority
CONFIG_GPIO_SIFIVE_15_PRIORITY GPIO 15 interrupt priority
CONFIG_GPIO_SIFIVE_16_PRIORITY GPIO 16 interrupt priority
CONFIG_GPIO_SIFIVE_17_PRIORITY GPIO 17 interrupt priority
CONFIG_GPIO_SIFIVE_18_PRIORITY GPIO 18 interrupt priority
CONFIG_GPIO_SIFIVE_19_PRIORITY GPIO 19 interrupt priority
CONFIG_GPIO_SIFIVE_1_PRIORITY GPIO 1 interrupt priority
CONFIG_GPIO_SIFIVE_20_PRIORITY GPIO 20 interrupt priority
CONFIG_GPIO_SIFIVE_21_PRIORITY GPIO 21 interrupt priority
CONFIG_GPIO_SIFIVE_22_PRIORITY GPIO 22 interrupt priority
CONFIG_GPIO_SIFIVE_23_PRIORITY GPIO 23 interrupt priority
CONFIG_GPIO_SIFIVE_24_PRIORITY GPIO 24 interrupt priority
CONFIG_GPIO_SIFIVE_25_PRIORITY GPIO 25 interrupt priority
CONFIG_GPIO_SIFIVE_26_PRIORITY GPIO 26 interrupt priority
CONFIG_GPIO_SIFIVE_27_PRIORITY GPIO 27 interrupt priority
CONFIG_GPIO_SIFIVE_28_PRIORITY GPIO 28 interrupt priority
CONFIG_GPIO_SIFIVE_29_PRIORITY GPIO 29 interrupt priority
CONFIG_GPIO_SIFIVE_2_PRIORITY GPIO 2 interrupt priority
CONFIG_GPIO_SIFIVE_30_PRIORITY GPIO 30 interrupt priority
CONFIG_GPIO_SIFIVE_31_PRIORITY GPIO 31 interrupt priority
CONFIG_GPIO_SIFIVE_3_PRIORITY GPIO 3 interrupt priority
CONFIG_GPIO_SIFIVE_4_PRIORITY GPIO 4 interrupt priority
CONFIG_GPIO_SIFIVE_5_PRIORITY GPIO 5 interrupt priority
CONFIG_GPIO_SIFIVE_6_PRIORITY GPIO 6 interrupt priority
CONFIG_GPIO_SIFIVE_7_PRIORITY GPIO 7 interrupt priority
CONFIG_GPIO_SIFIVE_8_PRIORITY GPIO 8 interrupt priority
CONFIG_GPIO_SIFIVE_9_PRIORITY GPIO 9 interrupt priority
CONFIG_GPIO_STELLARIS TI Stellaris GPIO Driver
CONFIG_GPIO_STM32 GPIO Driver for STM32 family of MCUs
CONFIG_GPIO_STM32_PORTA Enable GPIO port A support
CONFIG_GPIO_STM32_PORTB Enable GPIO port B support
CONFIG_GPIO_STM32_PORTC Enable GPIO port C support
CONFIG_GPIO_STM32_PORTD Enable GPIO port D support
CONFIG_GPIO_STM32_PORTE Enable GPIO port E support
CONFIG_GPIO_STM32_PORTF Enable GPIO port F support
CONFIG_GPIO_STM32_PORTG Enable GPIO port G support
CONFIG_GPIO_STM32_PORTH Enable GPIO port H support
CONFIG_GPIO_STM32_PORTI Enable GPIO port I support
CONFIG_GPIO_STM32_PORTJ Enable GPIO port J support
CONFIG_GPIO_STM32_PORTK Enable GPIO port K support
CONFIG_GPIO_STM32_SWJ_DISABLE JTAG-DP Disabled and SW-DP Disabled
CONFIG_GPIO_STM32_SWJ_ENABLE Full SWJ (JTAG-DP + SW-DP): Reset State
CONFIG_GPIO_STM32_SWJ_NOJTAG JTAG-DP Disabled and SW-DP Enabled
CONFIG_GPIO_STM32_SWJ_NONJTRST Full SWJ (JTAG-DP + SW-DP) but without NJTRST
CONFIG_GPIO_SX1509B SX1509B I2C GPIO chip
CONFIG_GPIO_SX1509B_DEV_NAME SX1509B GPIO chip Device Name
CONFIG_GPIO_SX1509B_I2C_ADDR SX1509B GPIO chip I2C slave address
CONFIG_GPIO_SX1509B_I2C_MASTER_DEV_NAME I2C Master to which SX1509B GPIO chip is connected
CONFIG_GPIO_SX1509B_INIT_PRIORITY Init priority
CONFIG_GPIO_XEC XEC Microchip GPIO driver
CONFIG_GPIO_XEC_GPIO000_036 GPIO 000-036
CONFIG_GPIO_XEC_GPIO040_076 GPIO 040-036
CONFIG_GPIO_XEC_GPIO100_136 GPIO 100-136
CONFIG_GPIO_XEC_GPIO140_176 GPIO 140-176
CONFIG_GPIO_XEC_GPIO200_236 GPIO 200-236
CONFIG_GPIO_XEC_GPIO240_276 GPIO 240-276
CONFIG_GP_ALL_DATA All data global pointer references
CONFIG_GP_GLOBAL Global data global pointer references
CONFIG_GP_LOCAL Local data global pointer references
CONFIG_GP_NONE No global pointer
CONFIG_GROVE_LCD_RGB Enable the Seeed Grove LCD RGB Backlight
CONFIG_GROVE_LCD_RGB_I2C_MASTER_DEV_NAME I2C Master where Grove LCD is connected
CONFIG_GROVE_LIGHT_SENSOR Enable the Seeed Grove Light Sensor
CONFIG_GROVE_LIGHT_SENSOR_ADC_CHANNEL ADC channel used by Grove Light Sensor
CONFIG_GROVE_LIGHT_SENSOR_ADC_DEV_NAME ADC where Grove Light Sensor is connected
CONFIG_GROVE_LIGHT_SENSOR_NAME Driver name
CONFIG_GROVE_TEMPERATURE_SENSOR Enable the Seeed Grove Temperature Sensor
CONFIG_GROVE_TEMPERATURE_SENSOR_ADC_CHANNEL ADC channel used by Grove Temperature Sensor
CONFIG_GROVE_TEMPERATURE_SENSOR_ADC_DEV_NAME ADC where Grove Temperature Sensor is connected
CONFIG_GROVE_TEMPERATURE_SENSOR_NAME Driver name
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_0 v1.0
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_X v1.1/v1.2
CONFIG_HARVARD Harvard Architecture
CONFIG_HAS_ALTERA_HAL Altera HAL drivers support
CONFIG_HAS_CC13X2_CC26X2_SDK  
CONFIG_HAS_CC3220SDK  
CONFIG_HAS_CMSIS  
CONFIG_HAS_COVERAGE_SUPPORT  
CONFIG_HAS_CYPRESS_DRIVERS  
CONFIG_HAS_DIV_INSTRUCTION  
CONFIG_HAS_DTS  
CONFIG_HAS_DTS_ADC  
CONFIG_HAS_DTS_ENTROPY  
CONFIG_HAS_DTS_ETHERNET  
CONFIG_HAS_DTS_GPIO  
CONFIG_HAS_DTS_I2C  
CONFIG_HAS_DTS_QDEC  
CONFIG_HAS_DTS_SPI  
CONFIG_HAS_DTS_USB  
CONFIG_HAS_DTS_WDT  
CONFIG_HAS_FLASH_LOAD_OFFSET  
CONFIG_HAS_HW_NRF_ACL  
CONFIG_HAS_HW_NRF_ADC  
CONFIG_HAS_HW_NRF_BPROT  
CONFIG_HAS_HW_NRF_CC310  
CONFIG_HAS_HW_NRF_CCM  
CONFIG_HAS_HW_NRF_CLOCK  
CONFIG_HAS_HW_NRF_COMP  
CONFIG_HAS_HW_NRF_DPPIC  
CONFIG_HAS_HW_NRF_ECB  
CONFIG_HAS_HW_NRF_EGU0  
CONFIG_HAS_HW_NRF_EGU1  
CONFIG_HAS_HW_NRF_EGU2  
CONFIG_HAS_HW_NRF_EGU3  
CONFIG_HAS_HW_NRF_EGU4  
CONFIG_HAS_HW_NRF_EGU5  
CONFIG_HAS_HW_NRF_GPIO0  
CONFIG_HAS_HW_NRF_GPIO1  
CONFIG_HAS_HW_NRF_GPIOTE  
CONFIG_HAS_HW_NRF_I2S  
CONFIG_HAS_HW_NRF_IPC  
CONFIG_HAS_HW_NRF_LPCOMP  
CONFIG_HAS_HW_NRF_MPU  
CONFIG_HAS_HW_NRF_MWU  
CONFIG_HAS_HW_NRF_NFCT  
CONFIG_HAS_HW_NRF_PDM  
CONFIG_HAS_HW_NRF_POWER  
CONFIG_HAS_HW_NRF_PPI  
CONFIG_HAS_HW_NRF_PWM0  
CONFIG_HAS_HW_NRF_PWM1  
CONFIG_HAS_HW_NRF_PWM2  
CONFIG_HAS_HW_NRF_PWM3  
CONFIG_HAS_HW_NRF_QDEC  
CONFIG_HAS_HW_NRF_QSPI  
CONFIG_HAS_HW_NRF_RADIO_IEEE802154  
CONFIG_HAS_HW_NRF_RNG  
CONFIG_HAS_HW_NRF_RTC0  
CONFIG_HAS_HW_NRF_RTC1  
CONFIG_HAS_HW_NRF_RTC2  
CONFIG_HAS_HW_NRF_SAADC  
CONFIG_HAS_HW_NRF_SPI0  
CONFIG_HAS_HW_NRF_SPI1  
CONFIG_HAS_HW_NRF_SPI2  
CONFIG_HAS_HW_NRF_SPIM0  
CONFIG_HAS_HW_NRF_SPIM1  
CONFIG_HAS_HW_NRF_SPIM2  
CONFIG_HAS_HW_NRF_SPIM3  
CONFIG_HAS_HW_NRF_SPIS0  
CONFIG_HAS_HW_NRF_SPIS1  
CONFIG_HAS_HW_NRF_SPIS2  
CONFIG_HAS_HW_NRF_SPIS3  
CONFIG_HAS_HW_NRF_SPU  
CONFIG_HAS_HW_NRF_SWI0  
CONFIG_HAS_HW_NRF_SWI1  
CONFIG_HAS_HW_NRF_SWI2  
CONFIG_HAS_HW_NRF_SWI3  
CONFIG_HAS_HW_NRF_SWI4  
CONFIG_HAS_HW_NRF_SWI5  
CONFIG_HAS_HW_NRF_TEMP  
CONFIG_HAS_HW_NRF_TIMER0  
CONFIG_HAS_HW_NRF_TIMER1  
CONFIG_HAS_HW_NRF_TIMER2  
CONFIG_HAS_HW_NRF_TIMER3  
CONFIG_HAS_HW_NRF_TIMER4  
CONFIG_HAS_HW_NRF_TWI0  
CONFIG_HAS_HW_NRF_TWI1  
CONFIG_HAS_HW_NRF_TWIM0  
CONFIG_HAS_HW_NRF_TWIM1  
CONFIG_HAS_HW_NRF_TWIM2  
CONFIG_HAS_HW_NRF_TWIM3  
CONFIG_HAS_HW_NRF_TWIS0  
CONFIG_HAS_HW_NRF_TWIS1  
CONFIG_HAS_HW_NRF_TWIS2  
CONFIG_HAS_HW_NRF_TWIS3  
CONFIG_HAS_HW_NRF_UART0  
CONFIG_HAS_HW_NRF_UARTE0  
CONFIG_HAS_HW_NRF_UARTE1  
CONFIG_HAS_HW_NRF_UARTE2  
CONFIG_HAS_HW_NRF_UARTE3  
CONFIG_HAS_HW_NRF_USBD  
CONFIG_HAS_HW_NRF_WDT  
CONFIG_HAS_I2C_DW  
CONFIG_HAS_IMX_CCM  
CONFIG_HAS_IMX_EPIT  
CONFIG_HAS_IMX_GPIO  
CONFIG_HAS_IMX_HAL  
CONFIG_HAS_IMX_I2C  
CONFIG_HAS_IMX_RDC  
CONFIG_HAS_MCG  
CONFIG_HAS_MCUX  
CONFIG_HAS_MCUX_ADC12  
CONFIG_HAS_MCUX_ADC16  
CONFIG_HAS_MCUX_CACHE  
CONFIG_HAS_MCUX_CCM  
CONFIG_HAS_MCUX_ELCDIF  
CONFIG_HAS_MCUX_ENET  
CONFIG_HAS_MCUX_FLEXCAN  
CONFIG_HAS_MCUX_FTFX  
CONFIG_HAS_MCUX_FTM  
CONFIG_HAS_MCUX_GPT  
CONFIG_HAS_MCUX_IGPIO  
CONFIG_HAS_MCUX_LPI2C  
CONFIG_HAS_MCUX_LPSCI  
CONFIG_HAS_MCUX_LPSPI  
CONFIG_HAS_MCUX_LPUART  
CONFIG_HAS_MCUX_PCC  
CONFIG_HAS_MCUX_PWM  
CONFIG_HAS_MCUX_RNGA  
CONFIG_HAS_MCUX_RTC  
CONFIG_HAS_MCUX_SCG  
CONFIG_HAS_MCUX_SIM  
CONFIG_HAS_MCUX_TRNG  
CONFIG_HAS_MCUX_USB_EHCI  
CONFIG_HAS_MCUX_USDHC1  
CONFIG_HAS_MCUX_USDHC2  
CONFIG_HAS_MCUX_WDOG32  
CONFIG_HAS_MEC_HAL Microchip MEC HAL drivers support
CONFIG_HAS_MSP432P4XXSDK  
CONFIG_HAS_MULX_INSTRUCTION  
CONFIG_HAS_MUL_INSTRUCTION  
CONFIG_HAS_NORDIC_DRIVERS  
CONFIG_HAS_NRFX  
CONFIG_HAS_OSC  
CONFIG_HAS_QMSI  
CONFIG_HAS_RV32M1_FTFX  
CONFIG_HAS_RV32M1_LPI2C  
CONFIG_HAS_RV32M1_LPUART  
CONFIG_HAS_SDL  
CONFIG_HAS_SEGGER_RTT  
CONFIG_HAS_SILABS_GECKO  
CONFIG_HAS_SPI_DW  
CONFIG_HAS_STLIB  
CONFIG_HAS_STM32CUBE  
CONFIG_HAS_STMEMSC  
CONFIG_HAS_SWO  
CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_1  
CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_2  
CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_3  
CONFIG_HAS_SYS_POWER_STATE_SLEEP_1  
CONFIG_HAS_SYS_POWER_STATE_SLEEP_2  
CONFIG_HAS_SYS_POWER_STATE_SLEEP_3  
CONFIG_HAS_WDT_MULTISTAGE  
CONFIG_HAVE_CUSTOM_LINKER_SCRIPT Custom linker scripts provided
CONFIG_HEAP_MEM_POOL_MIN_SIZE The smallest blocks in the heap memory pool (in bytes)
CONFIG_HEAP_MEM_POOL_SIZE Heap memory pool size (in bytes)
CONFIG_HID_INTERRUPT_EP_MPS USB HID Device Interrupt Endpoint size
CONFIG_HMC5883L HMC5883L magnetometer
CONFIG_HMC5883L_FS Full-scale range
CONFIG_HMC5883L_GPIO_DEV_NAME GPIO device
CONFIG_HMC5883L_GPIO_PIN_NUM Interrupt GPIO pin number
CONFIG_HMC5883L_I2C_MASTER_DEV_NAME I2C master where HMC5883L is connected
CONFIG_HMC5883L_NAME Driver name
CONFIG_HMC5883L_ODR Output data rate
CONFIG_HMC5883L_THREAD_PRIORITY Thread priority
CONFIG_HMC5883L_THREAD_STACK_SIZE Thread stack size
CONFIG_HMC5883L_TRIGGER  
CONFIG_HMC5883L_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_HMC5883L_TRIGGER_NONE No trigger
CONFIG_HMC5883L_TRIGGER_OWN_THREAD Use own thread
CONFIG_HP206C HopeRF HP206C precision barometer and altimeter sensor
CONFIG_HP206C_ALT_OFFSET Altitude offset (in cm)
CONFIG_HP206C_ALT_OFFSET_RUNTIME Altitude offset set at runtime
CONFIG_HP206C_DRV_NAME Driver’s name
CONFIG_HP206C_I2C_PORT_NAME I2C master controller port name
CONFIG_HP206C_OSR Oversampling rate
CONFIG_HP206C_OSR_RUNTIME Oversampling rate set at runtime
CONFIG_HPET_TIMER HPET timer
CONFIG_HPET_TIMER_BASE_ADDRESS HPET Base Address
CONFIG_HPET_TIMER_IRQ HPET Timer IRQ
CONFIG_HPET_TIMER_IRQ_PRIORITY HPET Timer IRQ Priority
CONFIG_HT16K33 HT16K33 LED driver
CONFIG_HT16K33_KEYSCAN Enable keyscan support
CONFIG_HT16K33_KEYSCAN_DEBOUNCE_MSEC Keyscan debounce interval in milliseconds
CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_PRIO Priority for keyscan interrupt request handler thread
CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_STACK_SIZE Stack size for keyscan interrupt request handler thread
CONFIG_HT16K33_KEYSCAN_POLL_MSEC Keyscan poll interval in milliseconds
CONFIG_HTS221 HTS221 temperature and humidity sensor
CONFIG_HTS221_ODR Output data rate
CONFIG_HTS221_THREAD_PRIORITY Thread priority
CONFIG_HTS221_THREAD_STACK_SIZE Thread stack size
CONFIG_HTS221_TRIGGER  
CONFIG_HTS221_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_HTS221_TRIGGER_NONE No trigger
CONFIG_HTS221_TRIGGER_OWN_THREAD Use own thread
CONFIG_HTTP_PARSER HTTP Parser support
CONFIG_HTTP_PARSER_STRICT HTTP strict parsing
CONFIG_HTTP_PARSER_URL HTTP Parser for URL support
CONFIG_HWINFO Hardware Information driver
CONFIG_HWINFO_ESP32 ESP32 device ID
CONFIG_HWINFO_IMXRT NXP i.mx RT device ID
CONFIG_HWINFO_MCUX_SIM NXP kinetis device ID
CONFIG_HWINFO_NRF NRF device ID
CONFIG_HWINFO_SAM Atmel SAM device ID
CONFIG_HWINFO_SAM0 Atmel SAM0 device ID
CONFIG_HWINFO_SHELL Enable HWINFO Shell
CONFIG_HWINFO_STM32 STM32 hwinfo
CONFIG_HW_STACK_PROTECTION Hardware Stack Protection
CONFIG_I2C I2C Drivers
CONFIG_I2C_0 Enable I2C Port 0
CONFIG_I2C_0_DEFAULT_CFG Port 0 default configuration
CONFIG_I2C_0_IRQ_PRI Port 0 interrupt priority
CONFIG_I2C_0_NAME Port 0 device name
CONFIG_I2C_0_NRF_TWI nRF TWI 0
CONFIG_I2C_0_NRF_TWIM nRF TWIM 0
CONFIG_I2C_1 Enable I2C Port 1
CONFIG_I2C_1_DEFAULT_CFG Port 1 default configuration
CONFIG_I2C_1_IRQ_PRI Port 1 interrupt priority
CONFIG_I2C_1_NAME Port 1 device name
CONFIG_I2C_1_NRF_TWI nRF TWI 1
CONFIG_I2C_1_NRF_TWIM nRF TWIM 1
CONFIG_I2C_2 Enable I2C Port 2
CONFIG_I2C_2_DEFAULT_CFG Port 2 default configuration
CONFIG_I2C_2_IRQ_PRI Port 2 interrupt priority
CONFIG_I2C_2_NAME Port 2 device name
CONFIG_I2C_2_NRF_TWIM nRF TWIM 2
CONFIG_I2C_3 Enable I2C Port 3
CONFIG_I2C_3_DEFAULT_CFG Port 3 default configuration
CONFIG_I2C_3_IRQ_PRI Port 3 interrupt priority
CONFIG_I2C_3_NAME Port 3 device name
CONFIG_I2C_3_NRF_TWIM nRF TWIM 3
CONFIG_I2C_4 Enable I2C Port 4
CONFIG_I2C_4_DEFAULT_CFG Port 4 default configuration
CONFIG_I2C_4_IRQ_PRI Port 4 interrupt priority
CONFIG_I2C_4_NAME Port 4 device name
CONFIG_I2C_5 Enable I2C Port 5
CONFIG_I2C_5_DEFAULT_CFG Port 5 default configuration
CONFIG_I2C_5_IRQ_PRI Port 5 interrupt priority
CONFIG_I2C_5_NAME Port 5 device name
CONFIG_I2C_6 Enable I2C Port 6
CONFIG_I2C_6_DEFAULT_CFG Port 6 default configuration
CONFIG_I2C_6_IRQ_PRI Port 6 interrupt priority
CONFIG_I2C_6_NAME Port 6 device name
CONFIG_I2C_7 Enable I2C Port 7
CONFIG_I2C_7_DEFAULT_CFG Port 7 default configuration
CONFIG_I2C_7_IRQ_PRI Port 7 interrupt priority
CONFIG_I2C_7_NAME Port 7 device name
CONFIG_I2C_BITBANG  
CONFIG_I2C_CC13XX_CC26XX TI SimpleLink CC13xx / CC26xx I2C driver
CONFIG_I2C_CC32XX CC32XX I2C driver
CONFIG_I2C_DW Design Ware I2C support
CONFIG_I2C_DW_CLOCK_SPEED Set the clock speed for I2C
CONFIG_I2C_EEPROM_SLAVE I2C Slave EEPROM driver
CONFIG_I2C_EEPROM_SLAVE_0 Enable I2C Slave EEPROM driver instance 0
CONFIG_I2C_EEPROM_SLAVE_1 Enable I2C Slave EEPROM driver instance 1
CONFIG_I2C_ESP32 ESP32 I2C
CONFIG_I2C_ESP32_0_IRQ Port 0 IRQ line
CONFIG_I2C_ESP32_0_RX_LSB_FIRST Port 0 Receive LSB first
CONFIG_I2C_ESP32_0_SCL_PIN Port 0 SCL pin
CONFIG_I2C_ESP32_0_SDA_PIN Port 0 SDA pin
CONFIG_I2C_ESP32_0_TX_LSB_FIRST Port 0 Transmit LSB first
CONFIG_I2C_ESP32_1_IRQ Port 1 IRQ line
CONFIG_I2C_ESP32_1_RX_LSB_FIRST Port 1 Receive LSB first
CONFIG_I2C_ESP32_1_SCL_PIN Port 1 SCL pin
CONFIG_I2C_ESP32_1_SDA_PIN Port 1 SDA pin
CONFIG_I2C_ESP32_1_TX_LSB_FIRST Port 1 Transmit LSB first
CONFIG_I2C_ESP32_TIMEOUT I2C timeout to receive a data bit in APB clock cycles
CONFIG_I2C_GECKO Gecko I2C driver
CONFIG_I2C_GPIO GPIO bit banging I2C support
CONFIG_I2C_GPIO_0 Enable GPIO Bit Bang I2C device 0
CONFIG_I2C_GPIO_0_GPIO Bit Bang I2C device 0 GPIO name
CONFIG_I2C_GPIO_0_NAME GPIO Bit Bang I2C device 0 device name
CONFIG_I2C_GPIO_0_SCL_PIN Bit Bang I2C device 0 GPIO pin number for SCL
CONFIG_I2C_GPIO_0_SDA_PIN Bit Bang I2C device 0 GPIO pin number for SDA
CONFIG_I2C_GPIO_1 Enable GPIO Bit Bang I2C device 1
CONFIG_I2C_GPIO_1_GPIO Bit Bang I2C device 1 GPIO name
CONFIG_I2C_GPIO_1_NAME Bit Bang I2C device 1 device name
CONFIG_I2C_GPIO_1_SCL_PIN Bit Bang I2C device 1 GPIO pin number for SCL
CONFIG_I2C_GPIO_1_SDA_PIN Bit Bang I2C device 1 GPIO pin number for SDA
CONFIG_I2C_GPIO_2 Enable GPIO Bit Bang I2C device 2
CONFIG_I2C_GPIO_2_GPIO Bit Bang I2C device 2 GPIO name
CONFIG_I2C_GPIO_2_NAME Bit Bang I2C device 2 device name
CONFIG_I2C_GPIO_2_SCL_PIN Bit Bang I2C device 2 GPIO pin number for SCL
CONFIG_I2C_GPIO_2_SDA_PIN Bit Bang I2C device 2 GPIO pin number for SDA
CONFIG_I2C_GPIO_3 Enable GPIO Bit Bang I2C device 3
CONFIG_I2C_GPIO_3_GPIO Bit Bang I2C device 3 GPIO name
CONFIG_I2C_GPIO_3_NAME Bit Bang I2C device 3 device name
CONFIG_I2C_GPIO_3_SCL_PIN Bit Bang I2C device 3 GPIO pin number for SCL
CONFIG_I2C_GPIO_3_SDA_PIN Bit Bang I2C device 3 GPIO pin number for SDA
CONFIG_I2C_IMX i.MX I2C driver
CONFIG_I2C_INIT_PRIORITY Init priority
CONFIG_I2C_LOG_LEVEL  
CONFIG_I2C_LOG_LEVEL_DBG Debug
CONFIG_I2C_LOG_LEVEL_ERR Error
CONFIG_I2C_LOG_LEVEL_INF Info
CONFIG_I2C_LOG_LEVEL_OFF Off
CONFIG_I2C_LOG_LEVEL_WRN Warning
CONFIG_I2C_MCUX MCUX I2C driver
CONFIG_I2C_MCUX_LPI2C MCUX LPI2C driver
CONFIG_I2C_NIOS2 Nios-II I2C driver
CONFIG_I2C_NRFX nRF TWI nrfx drivers
CONFIG_I2C_QMSI QMSI I2C driver
CONFIG_I2C_QMSI_SS QMSI I2C driver for the Sensor Subsystem
CONFIG_I2C_RV32M1_LPI2C RV32M1 LPI2C driver
CONFIG_I2C_SAM0 SAM0 series I2C SERCOM driver
CONFIG_I2C_SAM0_DMA_DRIVEN Enable DMA support for SAM0 I2C devices
CONFIG_I2C_SAM_TWI Atmel SAM (TWI) I2C driver
CONFIG_I2C_SAM_TWIHS Atmel SAM (TWIHS) I2C driver
CONFIG_I2C_SBCON I2C driver for ARM’s SBCon two-wire serial bus interface
CONFIG_I2C_SDA_RX_HOLD  
CONFIG_I2C_SDA_SETUP  
CONFIG_I2C_SDA_TX_HOLD  
CONFIG_I2C_SIFIVE Sifive I2C driver
CONFIG_I2C_SLAVE I2C Slave Drivers
CONFIG_I2C_SLAVE_INIT_PRIORITY Init priority
CONFIG_I2C_SS_0 Enable I2C_SS_0
CONFIG_I2C_SS_1 Enable I2C SS Port 1
CONFIG_I2C_SS_SDA_HOLD  
CONFIG_I2C_SS_SDA_SETUP  
CONFIG_I2C_STM32 STM32 I2C driver
CONFIG_I2C_STM32_COMBINED_INTERRUPT  
CONFIG_I2C_STM32_INTERRUPT STM32 MCU I2C Interrupt Support
CONFIG_I2C_STM32_V1  
CONFIG_I2C_STM32_V2  
CONFIG_I2C_XEC XEC Microchip I2C driver
CONFIG_I2C_XEC_0 Enable I2C XEC device 0
CONFIG_I2C_XEC_1 Enable I2C XEC device 1
CONFIG_I2C_XEC_2 Enable I2C XEC device 2
CONFIG_I2S I2S bus drivers
CONFIG_I2S_1 I2S port 1
CONFIG_I2S_2 I2S port 2
CONFIG_I2S_3 I2S port 3
CONFIG_I2S_4 I2S port 4
CONFIG_I2S_5 I2S port 5
CONFIG_I2S_CAVS Intel I2S (SSP) Bus Driver
CONFIG_I2S_CAVS_1_DMA_RX_CHANNEL DMA RX channel
CONFIG_I2S_CAVS_1_DMA_TX_CHANNEL DMA TX channel
CONFIG_I2S_CAVS_1_NAME I2S 1 device name
CONFIG_I2S_CAVS_2_DMA_RX_CHANNEL DMA RX channel
CONFIG_I2S_CAVS_2_DMA_TX_CHANNEL DMA TX channel
CONFIG_I2S_CAVS_2_NAME I2S 2 device name
CONFIG_I2S_CAVS_3_DMA_RX_CHANNEL DMA RX channel
CONFIG_I2S_CAVS_3_DMA_TX_CHANNEL DMA TX channel
CONFIG_I2S_CAVS_3_NAME I2S 3 device name
CONFIG_I2S_CAVS_DMA_NAME DMA device name
CONFIG_I2S_CAVS_IRQ_PRI Interrupt priority
CONFIG_I2S_INIT_PRIORITY Init priority
CONFIG_I2S_LOG_LEVEL  
CONFIG_I2S_LOG_LEVEL_DBG Debug
CONFIG_I2S_LOG_LEVEL_ERR Error
CONFIG_I2S_LOG_LEVEL_INF Info
CONFIG_I2S_LOG_LEVEL_OFF Off
CONFIG_I2S_LOG_LEVEL_WRN Warning
CONFIG_I2S_SAM_SSC Atmel SAM MCU family I2S (SSC) Bus Driver
CONFIG_I2S_SAM_SSC_0_DMA_RX_CHANNEL DMA RX channel
CONFIG_I2S_SAM_SSC_0_DMA_TX_CHANNEL DMA TX channel
CONFIG_I2S_SAM_SSC_0_IRQ_PRI Interrupt priority
CONFIG_I2S_SAM_SSC_0_NAME I2S 0 device name
CONFIG_I2S_SAM_SSC_0_PIN_RF_EN RF pin enabled
CONFIG_I2S_SAM_SSC_0_PIN_RK_EN RK pin enabled
CONFIG_I2S_SAM_SSC_0_PIN_TD_PB5 PB5
CONFIG_I2S_SAM_SSC_0_PIN_TD_PD10 PD10
CONFIG_I2S_SAM_SSC_0_PIN_TD_PD26 PD26
CONFIG_I2S_SAM_SSC_DMA_NAME DMA device name
CONFIG_I2S_SAM_SSC_RX_BLOCK_COUNT RX queue length
CONFIG_I2S_SAM_SSC_TX_BLOCK_COUNT TX queue length
CONFIG_I2S_STM32 STM32 MCU I2S controller driver
CONFIG_I2S_STM32_PLLI2S_PLLM Division factor for PLLI2S VCO input clock
CONFIG_I2S_STM32_PLLI2S_PLLN Multiplier factor for PLLI2S VCO output clock
CONFIG_I2S_STM32_PLLI2S_PLLR Division factor for I2S clock
CONFIG_I2S_STM32_RX_BLOCK_COUNT RX queue length
CONFIG_I2S_STM32_TX_BLOCK_COUNT TX queue length
CONFIG_I2S_STM32_USE_PLLI2S_ENABLE Enable usage of PLL
CONFIG_IAQ_CORE_MAX_READ_RETRIES Number of read retries
CONFIG_IDLE_STACK_SIZE Size of stack for idle thread
CONFIG_IDT_NUM_VECTORS Number of IDT vectors
CONFIG_IEEE802154 IEEE 802.15.4 drivers options
CONFIG_IEEE802154_CC1200 TI CC1200 Driver support
CONFIG_IEEE802154_CC1200_CCA_THRESHOLD Value in dbm of the CCA threshold
CONFIG_IEEE802154_CC1200_DRV_NAME TI CC1200 Driver’s name
CONFIG_IEEE802154_CC1200_GPIO_SPI_CS Manage SPI CS through a GPIO pin
CONFIG_IEEE802154_CC1200_INIT_PRIO CC1200 initialization priority
CONFIG_IEEE802154_CC1200_MAC4 MAC Address Byte 4
CONFIG_IEEE802154_CC1200_MAC5 MAC Address Byte 5
CONFIG_IEEE802154_CC1200_MAC6 MAC Address Byte 6
CONFIG_IEEE802154_CC1200_MAC7 MAC Address Byte 7
CONFIG_IEEE802154_CC1200_PKTCFG0  
CONFIG_IEEE802154_CC1200_PKTCFG1  
CONFIG_IEEE802154_CC1200_PKTCFG2  
CONFIG_IEEE802154_CC1200_RANDOM_MAC Random MAC address
CONFIG_IEEE802154_CC1200_RFEND_CFG0  
CONFIG_IEEE802154_CC1200_RFEND_CFG1  
CONFIG_IEEE802154_CC1200_RF_PRESET Use TI CC1200 RF pre-sets
CONFIG_IEEE802154_CC1200_RF_SET_0 868MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI
CONFIG_IEEE802154_CC1200_RF_SET_1 920MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ARIB
CONFIG_IEEE802154_CC1200_RF_SET_2 434MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI
CONFIG_IEEE802154_CC1200_RSSI_OFFSET Value in dbm of the RSSI offset
CONFIG_IEEE802154_CC1200_RX_STACK_SIZE Driver’s internal RX thread stack size
CONFIG_IEEE802154_CC1200_SETTLING_CFG  
CONFIG_IEEE802154_CC1200_XOSC Value of the Crystal oscillator in kHz
CONFIG_IEEE802154_CC2520 TI CC2520 Driver support
CONFIG_IEEE802154_CC2520_CRYPTO Enable hardware crypto helper on cc2520
CONFIG_IEEE802154_CC2520_CRYPTO_DRV_NAME TI CC2520 Crypto Driver’s name
CONFIG_IEEE802154_CC2520_CRYPTO_INIT_PRIO TI CC2520 crypto device initialization priority
CONFIG_IEEE802154_CC2520_DRV_NAME TI CC2520 Driver’s name
CONFIG_IEEE802154_CC2520_GPIO_SPI_CS Manage SPI CS through a GPIO pin
CONFIG_IEEE802154_CC2520_INIT_PRIO CC2520 initialization priority
CONFIG_IEEE802154_CC2520_MAC4 MAC Address Byte 4
CONFIG_IEEE802154_CC2520_MAC5 MAC Address Byte 5
CONFIG_IEEE802154_CC2520_MAC6 MAC Address Byte 6
CONFIG_IEEE802154_CC2520_MAC7 MAC Address Byte 7
CONFIG_IEEE802154_CC2520_RANDOM_MAC Random MAC address
CONFIG_IEEE802154_CC2520_RX_STACK_SIZE Driver’s internal RX thread stack size
CONFIG_IEEE802154_DRIVER_LOG_LEVEL  
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_DBG Debug
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_ERR Error
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_INF Info
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_OFF Off
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_WRN Warning
CONFIG_IEEE802154_KW41Z NXP KW41Z Driver support
CONFIG_IEEE802154_KW41Z_DRV_NAME NXP KW41Z Driver’s name
CONFIG_IEEE802154_KW41Z_INIT_PRIO KW41Z initialization priority
CONFIG_IEEE802154_MCR20A NXP MCR20A Driver support
CONFIG_IEEE802154_MCR20A_DRV_NAME NXP MCR20A Driver’s name
CONFIG_IEEE802154_MCR20A_INIT_PRIO MCR20A initialization priority
CONFIG_IEEE802154_MCR20A_RX_STACK_SIZE Driver’s internal RX thread stack size
CONFIG_IEEE802154_NRF5 nRF52 series IEEE 802.15.4 Driver
CONFIG_IEEE802154_NRF5_CCA_CORR_LIMIT nRF52 IEEE 802.15.4 CCA Correlator limit
CONFIG_IEEE802154_NRF5_CCA_CORR_THRESHOLD nRF52 IEEE 802.15.4 CCA Correlator threshold
CONFIG_IEEE802154_NRF5_CCA_ED_THRESHOLD nRF52 IEEE 802.15.4 CCA Energy Detection threshold
CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER Carrier Seen
CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER_AND_ED Energy Above Threshold AND Carrier Seen
CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER_OR_ED Energy Above Threshold OR Carrier Seen
CONFIG_IEEE802154_NRF5_CCA_MODE_ED Energy Above Threshold
CONFIG_IEEE802154_NRF5_DRV_NAME nRF52 IEEE 802.15.4 Driver’s name
CONFIG_IEEE802154_NRF5_INIT_PRIO nRF52 IEEE 802.15.4 initialization priority
CONFIG_IEEE802154_NRF5_RX_STACK_SIZE Driver’s internal RX thread stack size
CONFIG_IEEE802154_RAW_MODE Use IEEE 802.15.4 driver without the MAC stack
CONFIG_IEEE802154_UPIPE UART PIPE fake radio driver support for QEMU
CONFIG_IEEE802154_UPIPE_DRV_NAME UART PIPE Driver name
CONFIG_IEEE802154_UPIPE_HW_FILTER Hw Filtering
CONFIG_IEEE802154_UPIPE_MAC4 MAC Address Byte 4
CONFIG_IEEE802154_UPIPE_MAC5 MAC Address Byte 5
CONFIG_IEEE802154_UPIPE_MAC6 MAC Address Byte 6
CONFIG_IEEE802154_UPIPE_MAC7 MAC Address Byte 7
CONFIG_IEEE802154_UPIPE_RANDOM_MAC Random MAC address
CONFIG_ILI9340 ILI9340 display driver
CONFIG_ILI9340_LCD_ADAFRUIT_1480 Adafruit 2.2” TFT 1480
CONFIG_ILI9340_LCD_SEEED_TFTV2 Seeed 2.8” TFT v2.0
CONFIG_ILI9340_RGB565 RGB565
CONFIG_ILI9340_RGB888 RGB888
CONFIG_IMAGE_VECTOR_TABLE_OFFSET Image vector table offset
CONFIG_IMG_BLOCK_BUF_SIZE Image writer buffer size
CONFIG_IMG_ERASE_PROGRESSIVELY Erase flash progressively when receiving new firmware
CONFIG_IMG_MANAGER DFU image manager
CONFIG_IMG_MANAGER_LOG_LEVEL  
CONFIG_IMG_MANAGER_LOG_LEVEL_DBG Debug
CONFIG_IMG_MANAGER_LOG_LEVEL_ERR Error
CONFIG_IMG_MANAGER_LOG_LEVEL_INF Info
CONFIG_IMG_MANAGER_LOG_LEVEL_OFF Off
CONFIG_IMG_MANAGER_LOG_LEVEL_WRN Warning
CONFIG_IMG_MGMT_UL_CHUNK_SIZE Maximum chunk size for image uploads
CONFIG_INCLUDE_RESET_VECTOR Include Reset vector / Include Reset vector
CONFIG_INIT_ARM_PLL Initialize ARM PLL
CONFIG_INIT_ENET_PLL  
CONFIG_INIT_STACKS Initialize stack areas
CONFIG_INIT_SYS_PLL Initialize SYS PLL
CONFIG_INIT_USB1_PLL Initialize USB1 PLL
CONFIG_INIT_VIDEO_PLL Initialize Video PLL
CONFIG_INTEL_GNA Intel GNA Inferencing Engine
CONFIG_INTEL_GNA_INIT_PRIORITY Init priority
CONFIG_INTEL_GNA_MAX_MODELS Max number of neural network models supported by driver
CONFIG_INTEL_GNA_MAX_PENDING_REQUESTS Max number of pending inference requests
CONFIG_INTEL_GNA_NAME GNA device name
CONFIG_INTEL_GNA_POWER_MODE GNA operation mode
CONFIG_IOAPIC IO-APIC
CONFIG_IOAPIC_DEBUG IO-APIC Debugging
CONFIG_IOAPIC_MASK_RTE Mask out RTE entries on boot
CONFIG_IOAPIC_NUM_RTES Number of Redirection Table Entries available
CONFIG_IPG_DIV IPG clock divider
CONFIG_IPM IPM drivers
CONFIG_IPM_CONSOLE_INIT_PRIORITY IPM console init priority
CONFIG_IPM_CONSOLE_RECEIVER Inter-processor Mailbox console receiver
CONFIG_IPM_CONSOLE_SENDER Inter-processor Mailbox console sender
CONFIG_IPM_CONSOLE_STACK_SIZE Stack size for IPM console receiver thread
CONFIG_IPM_IMX IMX IPM driver
CONFIG_IPM_IMX_MAX_DATA_SIZE  
CONFIG_IPM_IMX_MAX_DATA_SIZE_16 16 bytes
CONFIG_IPM_IMX_MAX_DATA_SIZE_4 4 bytes
CONFIG_IPM_IMX_MAX_DATA_SIZE_8 8 bytes
CONFIG_IPM_IMX_MAX_ID_VAL  
CONFIG_IPM_LOG_LEVEL  
CONFIG_IPM_LOG_LEVEL_DBG Debug
CONFIG_IPM_LOG_LEVEL_ERR Error
CONFIG_IPM_LOG_LEVEL_INF Info
CONFIG_IPM_LOG_LEVEL_OFF Off
CONFIG_IPM_LOG_LEVEL_WRN Warning
CONFIG_IPM_MCUX MCUX IPM driver
CONFIG_IPM_MHU IPM MHU driver
CONFIG_IPM_STM32_IPCC STM32 IPCC controller
CONFIG_IPM_STM32_IPCC_PROCID STM32 IPCC Processor ID
CONFIG_IRQ_OFFLOAD Enable IRQ offload
CONFIG_IRQ_OFFLOAD_INTNUM IRQ offload SW interrupt index
CONFIG_IRQ_OFFLOAD_VECTOR IDT vector to use for IRQ offload / Interrupt vector for irq_offload
CONFIG_ISA_ARM  
CONFIG_ISA_THUMB2  
CONFIG_ISL29035 ISL29035 light sensor
CONFIG_ISL29035_GPIO_DEV_NAME GPIO device
CONFIG_ISL29035_GPIO_PIN_NUM GPIO pin number
CONFIG_ISL29035_I2C_MASTER_DEV_NAME I2C Master
CONFIG_ISL29035_INTEGRATION_TIME_105K 105 ms
CONFIG_ISL29035_INTEGRATION_TIME_26 0.0256 ms
CONFIG_ISL29035_INTEGRATION_TIME_410 0.41 ms
CONFIG_ISL29035_INTEGRATION_TIME_6500 6.5 ms
CONFIG_ISL29035_INT_PERSIST_1 1
CONFIG_ISL29035_INT_PERSIST_16 16
CONFIG_ISL29035_INT_PERSIST_4 4
CONFIG_ISL29035_INT_PERSIST_8 8
CONFIG_ISL29035_LUX_RANGE_16K 16000
CONFIG_ISL29035_LUX_RANGE_1K 1000
CONFIG_ISL29035_LUX_RANGE_4K 4000
CONFIG_ISL29035_LUX_RANGE_64K 64000
CONFIG_ISL29035_MODE_ALS ambient light
CONFIG_ISL29035_MODE_IR infrared
CONFIG_ISL29035_NAME Driver name
CONFIG_ISL29035_THREAD_PRIORITY Thread priority / Thread priority
CONFIG_ISL29035_THREAD_STACK_SIZE Thread stack size
CONFIG_ISL29035_TRIGGER  
CONFIG_ISL29035_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_ISL29035_TRIGGER_NONE No trigger
CONFIG_ISL29035_TRIGGER_OWN_THREAD Use own thread
CONFIG_ISR_STACK_SIZE ISR and initialization stack size (in bytes)
CONFIG_IS_BOOTLOADER Act as a bootloader
CONFIG_IWDG_STM32 Independent Watchdog (IWDG) Driver for STM32 family of MCUs
CONFIG_IWDG_STM32_START_AT_BOOT Start IWDG during boot
CONFIG_IWDG_STM32_TIMEOUT Value for IWDG timeout in [us]
CONFIG_JSON_LIBRARY Build JSON library
CONFIG_JWT Enable JSON Web Token generation
CONFIG_JWT_SIGN_ECDSA Use ECDSA signature (ES-256)
CONFIG_JWT_SIGN_RSA Use RSA signature (RS-256)
CONFIG_K64_BUS_CLOCK_DIVIDER Freescale K64 bus clock divider
CONFIG_K64_CORE_CLOCK_DIVIDER Freescale K64 core clock divider
CONFIG_K64_FLASH_CLOCK_DIVIDER Freescale K64 flash clock divider
CONFIG_K64_FLEXBUS_CLOCK_DIVIDER Freescale K64 FlexBus clock divider
CONFIG_KERNEL_BIN_NAME The kernel binary name
CONFIG_KERNEL_DEBUG Kernel debugging
CONFIG_KERNEL_ENTRY Kernel entry symbol
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT Default init priority
CONFIG_KERNEL_INIT_PRIORITY_DEVICE Default init priority for device drivers
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS Kernel objects initialization priority
CONFIG_KERNEL_LOG_LEVEL  
CONFIG_KERNEL_LOG_LEVEL_DBG Debug
CONFIG_KERNEL_LOG_LEVEL_ERR Error
CONFIG_KERNEL_LOG_LEVEL_INF Info
CONFIG_KERNEL_LOG_LEVEL_OFF Off
CONFIG_KERNEL_LOG_LEVEL_WRN Warning
CONFIG_KERNEL_SHELL Enable kernel shell
CONFIG_KINETIS_KE1XF_ENABLE_CODE_CACHE Enable the code cache
CONFIG_KOBJECT_TEXT_AREA Size if kobject text area
CONFIG_KW2XD_BUS_CLOCK_DIVIDER KW2xD bus clock divider
CONFIG_KW2XD_CORE_CLOCK_DIVIDER KW2xD core clock divider
CONFIG_KW2XD_FLASH_CLOCK_DIVIDER KW2xD flash clock divider
CONFIG_KW41_DBG_TRACE Enabled simplified debug tracing of events
CONFIG_LAZY_FP_SHARING  
CONFIG_LDREX_STREX_AVAILABLE  
CONFIG_LED LED drivers
CONFIG_LED_INIT_PRIORITY LED initialization priority
CONFIG_LED_LOG_LEVEL  
CONFIG_LED_LOG_LEVEL_DBG Debug
CONFIG_LED_LOG_LEVEL_ERR Error
CONFIG_LED_LOG_LEVEL_INF Info
CONFIG_LED_LOG_LEVEL_OFF Off
CONFIG_LED_LOG_LEVEL_WRN Warning
CONFIG_LED_STRIP LED strip drivers
CONFIG_LED_STRIP_INIT_PRIORITY LED strip initialization priority
CONFIG_LED_STRIP_LOG_LEVEL  
CONFIG_LED_STRIP_LOG_LEVEL_DBG Debug
CONFIG_LED_STRIP_LOG_LEVEL_ERR Error
CONFIG_LED_STRIP_LOG_LEVEL_INF Info
CONFIG_LED_STRIP_LOG_LEVEL_OFF Off
CONFIG_LED_STRIP_LOG_LEVEL_WRN Warning
CONFIG_LED_STRIP_RGB_SCRATCH  
CONFIG_LEUART_GECKO Gecko leuart driver
CONFIG_LIBMETAL libmetal Support
CONFIG_LIBMETAL_SRC_PATH libmetal library source path
CONFIG_LIB_CPLUSPLUS Link with STD C++ library
CONFIG_LINKER_ORPHAN_SECTION_ERROR Error
CONFIG_LINKER_ORPHAN_SECTION_PLACE Place
CONFIG_LINKER_ORPHAN_SECTION_WARN Warn
CONFIG_LINKER_SORT_BY_ALIGNMENT Sort input sections by alignment
CONFIG_LINK_WHOLE_ARCHIVE Allow linking with –whole-archive
CONFIG_LIS2DH LIS2DH Three Axis Accelerometer
CONFIG_LIS2DH_ACCEL_RANGE_16G +/-16g
CONFIG_LIS2DH_ACCEL_RANGE_2G +/-2g
CONFIG_LIS2DH_ACCEL_RANGE_4G +/-4g
CONFIG_LIS2DH_ACCEL_RANGE_8G +/-8g
CONFIG_LIS2DH_ACCEL_RANGE_RUNTIME Set at runtime
CONFIG_LIS2DH_ODR_1 1Hz
CONFIG_LIS2DH_ODR_2 10Hz
CONFIG_LIS2DH_ODR_3 25Hz
CONFIG_LIS2DH_ODR_4 50Hz
CONFIG_LIS2DH_ODR_5 100Hz
CONFIG_LIS2DH_ODR_6 200Hz
CONFIG_LIS2DH_ODR_7 400Hz
CONFIG_LIS2DH_ODR_8 1.6KHz
CONFIG_LIS2DH_ODR_9_LOW 5KHz
CONFIG_LIS2DH_ODR_9_NORMAL 1.25KHz
CONFIG_LIS2DH_ODR_RUNTIME Set at runtime
CONFIG_LIS2DH_OPER_MODE_HIGH_RES high resolution (12 bit)
CONFIG_LIS2DH_OPER_MODE_LOW_POWER low power (8 bit)
CONFIG_LIS2DH_OPER_MODE_NORMAL normal (10 bit)
CONFIG_LIS2DH_THREAD_PRIORITY Thread priority
CONFIG_LIS2DH_THREAD_STACK_SIZE Thread stack size
CONFIG_LIS2DH_TRIGGER  
CONFIG_LIS2DH_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LIS2DH_TRIGGER_NONE No trigger
CONFIG_LIS2DH_TRIGGER_OWN_THREAD Use own thread
CONFIG_LIS2DS12 LIS2DS12 I2C/SPI accelerometer sensor driver
CONFIG_LIS2DS12_ENABLE_TEMP Enable temperature
CONFIG_LIS2DS12_FS Accelerometer full-scale range
CONFIG_LIS2DS12_ODR Accelerometer Output data rate frequency
CONFIG_LIS2DS12_THREAD_PRIORITY Thread priority
CONFIG_LIS2DS12_THREAD_STACK_SIZE Thread stack size
CONFIG_LIS2DS12_TRIGGER  
CONFIG_LIS2DS12_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LIS2DS12_TRIGGER_NONE No trigger
CONFIG_LIS2DS12_TRIGGER_OWN_THREAD Use own thread
CONFIG_LIS2DW12 LIS2DW12 I2C/SPI accelerometer sensor driver
CONFIG_LIS2DW12_ACCEL_RANGE_16G 16G
CONFIG_LIS2DW12_ACCEL_RANGE_2G 2G
CONFIG_LIS2DW12_ACCEL_RANGE_4G 4G
CONFIG_LIS2DW12_ACCEL_RANGE_8G 8G
CONFIG_LIS2DW12_ACCEL_RANGE_RUNTIME Set at runtime (Default 2G)
CONFIG_LIS2DW12_INT_PIN_1 int1
CONFIG_LIS2DW12_INT_PIN_2 int2
CONFIG_LIS2DW12_ODR_100 100 Hz
CONFIG_LIS2DW12_ODR_12_5 12.5 Hz
CONFIG_LIS2DW12_ODR_1600 1600 Hz
CONFIG_LIS2DW12_ODR_1_6 1.6 Hz
CONFIG_LIS2DW12_ODR_200 200 Hz
CONFIG_LIS2DW12_ODR_25 25 Hz
CONFIG_LIS2DW12_ODR_400 400 Hz
CONFIG_LIS2DW12_ODR_50 50 Hz
CONFIG_LIS2DW12_ODR_800 800 Hz
CONFIG_LIS2DW12_ODR_RUNTIME Set at runtime (Default 100 Hz)
CONFIG_LIS2DW12_POWER_MODE Sensor Power Modes
CONFIG_LIS2DW12_THREAD_PRIORITY Thread priority
CONFIG_LIS2DW12_THREAD_STACK_SIZE Thread stack size
CONFIG_LIS2DW12_TRIGGER  
CONFIG_LIS2DW12_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LIS2DW12_TRIGGER_NONE No trigger
CONFIG_LIS2DW12_TRIGGER_OWN_THREAD Use own thread
CONFIG_LIS2MDL LIS2MDL Magnetometer
CONFIG_LIS2MDL_MAG_ODR_10 10 Hz
CONFIG_LIS2MDL_MAG_ODR_100 100 Hz
CONFIG_LIS2MDL_MAG_ODR_20 20 Hz
CONFIG_LIS2MDL_MAG_ODR_50 50 Hz
CONFIG_LIS2MDL_MAG_ODR_RUNTIME Set ODR at runtime (default 10 Hz)
CONFIG_LIS2MDL_THREAD_PRIORITY Thread priority
CONFIG_LIS2MDL_THREAD_STACK_SIZE Thread stack size
CONFIG_LIS2MDL_TRIGGER  
CONFIG_LIS2MDL_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LIS2MDL_TRIGGER_NONE No trigger
CONFIG_LIS2MDL_TRIGGER_OWN_THREAD Use own thread
CONFIG_LIS3MDL LIS3MDL magnetometer
CONFIG_LIS3MDL_FS Full-scale range
CONFIG_LIS3MDL_GPIO_DEV_NAME GPIO device
CONFIG_LIS3MDL_GPIO_PIN_NUM Interrupt GPIO pin number
CONFIG_LIS3MDL_ODR Output data rate
CONFIG_LIS3MDL_THREAD_PRIORITY Thread priority
CONFIG_LIS3MDL_THREAD_STACK_SIZE Thread stack size
CONFIG_LIS3MDL_TRIGGER  
CONFIG_LIS3MDL_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LIS3MDL_TRIGGER_NONE No trigger
CONFIG_LIS3MDL_TRIGGER_OWN_THREAD Use own thread
CONFIG_LITEX_TIMER LiteX Timer
CONFIG_LLMNR_RESOLVER Enable LLMNR support
CONFIG_LLMNR_RESOLVER_ADDITIONAL_BUF_CTR Additional DNS buffers
CONFIG_LLMNR_RESPONDER LLMNR responder
CONFIG_LLMNR_RESPONDER_INIT_PRIO Startup priority for the LLMNR responder init
CONFIG_LLMNR_RESPONDER_LOG_LEVEL  
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_DBG Debug
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_DEFAULT Default
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_ERR Error
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_INF Info
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_OFF Off
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_WRN Warning
CONFIG_LLMNR_RESPONDER_TTL Time-to-Live of returned DNS name
CONFIG_LOAPIC LOAPIC
CONFIG_LOAPIC_BASE_ADDRESS Local APIC Base Address
CONFIG_LOAPIC_SPURIOUS_VECTOR Handle LOAPIC spurious interrupts
CONFIG_LOAPIC_SPURIOUS_VECTOR_ID LOAPIC spurious vector ID
CONFIG_LOAPIC_TIMER LOAPIC timer
CONFIG_LOAPIC_TIMER_IRQ Local APIC Timer IRQ
CONFIG_LOAPIC_TIMER_IRQ_PRIORITY Local APIC Timer IRQ Priority
CONFIG_LOG Logging
CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP Enable timestamp formatting in the backend
CONFIG_LOG_BACKEND_NATIVE_POSIX Enable native backend
CONFIG_LOG_BACKEND_NET Enable networking backend
CONFIG_LOG_BACKEND_NET_MAX_BUF How many network buffers to allocate for sending messages
CONFIG_LOG_BACKEND_NET_MAX_BUF_SIZE Max syslog message size
CONFIG_LOG_BACKEND_NET_SERVER Syslog server IP address
CONFIG_LOG_BACKEND_QEMU_X86_64 Enable QEMU x86_64 backend
CONFIG_LOG_BACKEND_RTT Enable Segger J-Link RTT backend
CONFIG_LOG_BACKEND_RTT_BUFFER Buffer number used for logger output.
CONFIG_LOG_BACKEND_RTT_BUFFER_SIZE Size of reserved up-buffer for logger output.
CONFIG_LOG_BACKEND_RTT_FORCE_PRINTK  
CONFIG_LOG_BACKEND_RTT_MESSAGE_SIZE Size of internal buffer for storing messages.
CONFIG_LOG_BACKEND_RTT_MODE_BLOCK Block until message is transferred to host.
CONFIG_LOG_BACKEND_RTT_MODE_DROP Drop messages that do not fit in up-buffer.
CONFIG_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE Size of the output buffer
CONFIG_LOG_BACKEND_RTT_RETRY_CNT Number of retries
CONFIG_LOG_BACKEND_RTT_RETRY_DELAY_MS Delay between TX retries in milliseconds
CONFIG_LOG_BACKEND_SHOW_COLOR Enable colors in the backend
CONFIG_LOG_BACKEND_SWO Enable Serial Wire Output (SWO) backend
CONFIG_LOG_BACKEND_SWO_FREQ_HZ Set SWO output frequency
CONFIG_LOG_BACKEND_UART Enable UART backend
CONFIG_LOG_BACKEND_XTENSA_OUTPUT_BUFFER_SIZE Size of the output buffer
CONFIG_LOG_BACKEND_XTENSA_SIM Enable xtensa simulator backend
CONFIG_LOG_BUFFER_SIZE Number of bytes dedicated for the logger internal buffer.
CONFIG_LOG_CMDS Enable shell commands
CONFIG_LOG_DEFAULT_LEVEL Default log level
CONFIG_LOG_DETECT_MISSED_STRDUP Detect missed handling of transient strings
CONFIG_LOG_DOMAIN_ID Domain ID
CONFIG_LOG_ENABLE_FANCY_OUTPUT_FORMATTING Format strings with minimal libc _prf() instead of _vprintk()
CONFIG_LOG_FRONTEND Enable frontend
CONFIG_LOG_FUNC_NAME_PREFIX_DBG Debug messages prepended
CONFIG_LOG_FUNC_NAME_PREFIX_ERR Error messages prepended
CONFIG_LOG_FUNC_NAME_PREFIX_INF Info messages prepended
CONFIG_LOG_FUNC_NAME_PREFIX_WRN Warning messages prepended
CONFIG_LOG_I2C_SLAVE_LEVEL I2C Slave log level
CONFIG_LOG_IMMEDIATE Enable synchronous processing
CONFIG_LOG_MAX_LEVEL Maximal log level compiled in the system
CONFIG_LOG_MGMT_BODY_LEN Maximum log body length
CONFIG_LOG_MGMT_CHUNK_SIZE Maximum chunk size for log downloads
CONFIG_LOG_MGMT_NAME_LEN Maximum log name length
CONFIG_LOG_MODE_NO_OVERFLOW New logs are dropped
CONFIG_LOG_MODE_OVERFLOW Oldest logs are discarded
CONFIG_LOG_OVERRIDE_LEVEL Override lowest log level
CONFIG_LOG_PRINTK Enable processing of printk messages.
CONFIG_LOG_PRINTK_MAX_STRING_LENGTH Maximum string length supported by LOG_PRINTK
CONFIG_LOG_PROCESS_THREAD Enable internal thread for log processing
CONFIG_LOG_PROCESS_THREAD_SLEEP_MS Set internal log processing thread sleep period
CONFIG_LOG_PROCESS_THREAD_STACK_SIZE Stack size for the internal log processing thread
CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD Amount of buffered logs which triggers processing thread.
CONFIG_LOG_RUNTIME_FILTERING Enable runtime reconfiguration of the logger
CONFIG_LOG_STRDUP_BUF_COUNT Number of buffers in the pool used by log_strdup()
CONFIG_LOG_STRDUP_MAX_STRING Longest string that can be duplicated using log_strdup()
CONFIG_LOG_STRDUP_POOL_PROFILING Enable profiling of pool used for log_strdup()
CONFIG_LOOPBACK_BULK_EP_MPS  
CONFIG_LP3943 LP3943 LED driver
CONFIG_LP3943_DEV_NAME LP3943 device name
CONFIG_LP3943_I2C_ADDRESS LP3943 I2C slave address
CONFIG_LP3943_I2C_MASTER_DEV_NAME I2C master where LP3943 is connected
CONFIG_LP5562 LP5562 LED driver
CONFIG_LP5562_DEV_NAME LP5562 device name
CONFIG_LP5562_I2C_ADDRESS LP5562 I2C slave address
CONFIG_LP5562_I2C_MASTER_DEV_NAME I2C master where LP5562 is connected
CONFIG_LPD880X_STRIP Enable LPD880x SPI LED strip driver
CONFIG_LPS22HB LPS22HB pressure and temperature
CONFIG_LPS22HB_SAMPLING_RATE Output data rate
CONFIG_LPS22HH LPS22HH pressure and temperature
CONFIG_LPS22HH_SAMPLING_RATE Output data rate
CONFIG_LPS22HH_THREAD_PRIORITY Thread priority
CONFIG_LPS22HH_THREAD_STACK_SIZE Thread stack size
CONFIG_LPS22HH_TRIGGER  
CONFIG_LPS22HH_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LPS22HH_TRIGGER_NONE No trigger
CONFIG_LPS22HH_TRIGGER_OWN_THREAD Use own thread
CONFIG_LPS25HB LPS25HB pressure and temperature
CONFIG_LPS25HB_SAMPLING_RATE Output data rate
CONFIG_LPUART_1 Enable STM32 LPUART1 Port
CONFIG_LSM303DLHC_MAGN LSM303DLHC Three Axis Magnetometer
CONFIG_LSM303DLHC_MAGN_ODR Data rate frequency
CONFIG_LSM303DLHC_MAGN_RANGE Magnetometer measurement range
CONFIG_LSM6DS0 LSM6DS0 I2C accelerometer and gyroscope Chip
CONFIG_LSM6DS0_ACCEL_ENABLE_X_AXIS Enable accelerometer X axis
CONFIG_LSM6DS0_ACCEL_ENABLE_Y_AXIS Enable accelerometer Y axis
CONFIG_LSM6DS0_ACCEL_ENABLE_Z_AXIS Enable accelerometer Z axis
CONFIG_LSM6DS0_ACCEL_FULLSCALE Accelerometer full-scale range
CONFIG_LSM6DS0_ACCEL_SAMPLING_RATE Output data rate
CONFIG_LSM6DS0_ENABLE_TEMP Enable temperature
CONFIG_LSM6DS0_GYRO_ENABLE_X_AXIS Enable gyroscope X axis
CONFIG_LSM6DS0_GYRO_ENABLE_Y_AXIS Enable gyroscope Y axis
CONFIG_LSM6DS0_GYRO_ENABLE_Z_AXIS Enable gyroscope Z axis
CONFIG_LSM6DS0_GYRO_FULLSCALE Gyroscope full-scale range
CONFIG_LSM6DS0_GYRO_SAMPLING_RATE Output data rate
CONFIG_LSM6DSL LSM6DSL I2C/SPI accelerometer and gyroscope Chip
CONFIG_LSM6DSL_ACCEL_FS Accelerometer full-scale range
CONFIG_LSM6DSL_ACCEL_ODR Accelerometer Output data rate frequency
CONFIG_LSM6DSL_ENABLE_INTERNAL_PULLUP Enabled internals pull-up resistors
CONFIG_LSM6DSL_ENABLE_TEMP Enable temperature
CONFIG_LSM6DSL_EXT0_LIS2MDL LIS2MDL
CONFIG_LSM6DSL_EXT0_LPS22HB LPS22HB
CONFIG_LSM6DSL_GYRO_FS Gyroscope full-scale range
CONFIG_LSM6DSL_GYRO_ODR Gyroscope Output data rate frequency
CONFIG_LSM6DSL_SENSORHUB Enable I2C sensorhub feature
CONFIG_LSM6DSL_THREAD_PRIORITY Thread priority
CONFIG_LSM6DSL_THREAD_STACK_SIZE Thread stack size
CONFIG_LSM6DSL_TRIGGER  
CONFIG_LSM6DSL_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LSM6DSL_TRIGGER_NONE No trigger
CONFIG_LSM6DSL_TRIGGER_OWN_THREAD Use own thread
CONFIG_LSM6DSO LSM6DSO I2C/SPI accelerometer and gyroscope Chip
CONFIG_LSM6DSO_ACCEL_FS Accelerometer full-scale range
CONFIG_LSM6DSO_ACCEL_ODR Accelerometer Output data rate frequency
CONFIG_LSM6DSO_ENABLE_TEMP Enable temperature
CONFIG_LSM6DSO_EXT_HTS221 Enable HTS221 as external sensor
CONFIG_LSM6DSO_EXT_LIS2MDL Enable LIS2MDL as external sensor
CONFIG_LSM6DSO_EXT_LPS22HB Enable LPS22HB as external sensor
CONFIG_LSM6DSO_EXT_LPS22HH Enable LPS22HH as external sensor
CONFIG_LSM6DSO_GYRO_FS Gyroscope full-scale range
CONFIG_LSM6DSO_GYRO_ODR Gyroscope Output data rate frequency
CONFIG_LSM6DSO_INT_PIN_1 int1
CONFIG_LSM6DSO_INT_PIN_2 int2
CONFIG_LSM6DSO_SENSORHUB Enable I2C sensorhub feature
CONFIG_LSM6DSO_THREAD_PRIORITY Thread priority
CONFIG_LSM6DSO_THREAD_STACK_SIZE Thread stack size
CONFIG_LSM6DSO_TRIGGER  
CONFIG_LSM6DSO_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_LSM6DSO_TRIGGER_NONE No trigger
CONFIG_LSM6DSO_TRIGGER_OWN_THREAD Use own thread
CONFIG_LSM9DS0_GYRO LSM9DS0 I2C gyroscope Chip
CONFIG_LSM9DS0_GYRO_FULLSCALE_2000 2000 DPS
CONFIG_LSM9DS0_GYRO_FULLSCALE_245 245 DPS
CONFIG_LSM9DS0_GYRO_FULLSCALE_500 500 DPS
CONFIG_LSM9DS0_GYRO_FULLSCALE_RUNTIME Enable dynamic full-scale
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_190 190 Hz
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_380 380 Hz
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_760 760 Hz
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_95 95 Hz
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_RUNTIME Enable dynamic sampling rate
CONFIG_LSM9DS0_GYRO_THREAD_STACK_SIZE Thread stack size
CONFIG_LSM9DS0_GYRO_TRIGGERS Enable triggers
CONFIG_LSM9DS0_GYRO_TRIGGER_DRDY Enable data ready trigger
CONFIG_LSM9DS0_MFD LSM9DS0 I2C accelerometer, magnetometer and temperature sensor chip
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE Enable accelerometer
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_X Enable accelerometer X axis
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_Y Enable accelerometer Y axis
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_Z Enable accelerometer Z axis
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_16 16G
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_2 2G
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_4 4G
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_6 6G
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_8 8G
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_RUNTIME Enable dynamic full-scale for accelerometer
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_0 0 Hz (power down)
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_100 100 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_12_5 12.5 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_1600 1600 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_200 200 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_25 25 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_3_125 3.125 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_400 400 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_50 50 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_6_25 6.25 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_800 800 Hz
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_RUNTIME Enable dynamic sampling rate for accelerometer
CONFIG_LSM9DS0_MFD_MAGN_ENABLE Enable magnetometer
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_12 12 Gauss
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_2 2 Gauss
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_4 4 Gauss
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_8 8 Gauss
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_RUNTIME Enable dynamic full-scale for magnetometer
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_100 100 Hz
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_12_5 12.5 Hz
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_25 25 Hz
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_3_125 3.125 Hz
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_50 50 Hz
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_6_25 6.25 Hz
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_RUNTIME Enable dynamic sampling rate for magnetometer
CONFIG_LSM9DS0_MFD_TEMP_ENABLE Enable temperature sensor
CONFIG_LVGL LittlevGL GUI library
CONFIG_LVGL_ANIMATION Enable animations
CONFIG_LVGL_ANTIALIAS Enable anti-aliasing
CONFIG_LVGL_BITS_PER_PIXEL Bits per pixel
CONFIG_LVGL_BUFFER_ALLOC_DYNAMIC Dynamic
CONFIG_LVGL_BUFFER_ALLOC_STATIC Static
CONFIG_LVGL_BUILD_IN_FONT_ROBOTO_12 Enable build-in 12px fonts
CONFIG_LVGL_BUILD_IN_FONT_ROBOTO_16 Enable build-in 16px fonts
CONFIG_LVGL_BUILD_IN_FONT_ROBOTO_22 Enable build-in 22px fonts
CONFIG_LVGL_BUILD_IN_FONT_ROBOTO_28 Enable build-in 28px fonts
CONFIG_LVGL_BUILD_IN_FONT_UNSCII_8 Enable build-in 8px monospace fonts
CONFIG_LVGL_CHROMA_KEY_BLUE Blue
CONFIG_LVGL_CHROMA_KEY_CUSTOM Custom
CONFIG_LVGL_CHROMA_KEY_GREEN Green
CONFIG_LVGL_CHROMA_KEY_RED Red
CONFIG_LVGL_COLOR_16_SWAP RGB565 byte swap
CONFIG_LVGL_COLOR_DEPTH_1 1-bit
CONFIG_LVGL_COLOR_DEPTH_16 16-bit
CONFIG_LVGL_COLOR_DEPTH_32 32-bit
CONFIG_LVGL_COLOR_DEPTH_8 8-bit
CONFIG_LVGL_COLOR_SCREEN_TRANSP Transparency support
CONFIG_LVGL_CUSTOM_CHROMA_KEY_BLUE Chroma Key Blue
CONFIG_LVGL_CUSTOM_CHROMA_KEY_GREEN Chroma Key Green
CONFIG_LVGL_CUSTOM_CHROMA_KEY_RED Chroma Key Red
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_ROBOTO_12 Build-in font size 12
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_ROBOTO_16 Build-in font size 16
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_ROBOTO_22 Build-in font size 22
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_ROBOTO_28 Build-in font size 28
CONFIG_LVGL_DEFAULT_FONT_BUILD_IN_UNSCII_8 Build-in monospace font
CONFIG_LVGL_DEFAULT_FONT_CUSTOM Custom font
CONFIG_LVGL_DISPLAY_DEV_NAME Display device name
CONFIG_LVGL_DOUBLE_VDB Use two rendering buffers
CONFIG_LVGL_DPI DPI
CONFIG_LVGL_EXT_CLICK_AREA_FULL Full flexibility
CONFIG_LVGL_EXT_CLICK_AREA_OFF Disabled
CONFIG_LVGL_EXT_CLICK_AREA_TINY Only horizontally and vertical
CONFIG_LVGL_FILESYSTEM Enable file system
CONFIG_LVGL_GPU Enable GPU support
CONFIG_LVGL_GROUP Enable group support
CONFIG_LVGL_HOR_RES Horizontal Screen Resolution
CONFIG_LVGL_IMG_CACHE_DEF_SIZE Default image cache size
CONFIG_LVGL_IMG_CF_ALPHA Enable alpha indexed image support
CONFIG_LVGL_IMG_CF_INDEXED Enable indexed image support
CONFIG_LVGL_INPUT_DRAG_THRESHOLD Drag Threshold
CONFIG_LVGL_INPUT_DRAG_THROW_SLOW_DOWN Drag throw slow-down
CONFIG_LVGL_INPUT_LONG_PRESS_TIME Long press time
CONFIG_LVGL_INPUT_LONG_RESS_REPEAT_TIME Long press repeat time
CONFIG_LVGL_INPUT_REFRESH_PERIOD Input device refresh period
CONFIG_LVGL_LOG_LEVEL  
CONFIG_LVGL_LOG_LEVEL_DBG Debug
CONFIG_LVGL_LOG_LEVEL_ERR Error
CONFIG_LVGL_LOG_LEVEL_INF Info
CONFIG_LVGL_LOG_LEVEL_OFF Off
CONFIG_LVGL_LOG_LEVEL_WRN Warning
CONFIG_LVGL_MEM_POOL_HEAP_KERNEL Kernel Heap
CONFIG_LVGL_MEM_POOL_HEAP_LIB_C C library Heap
CONFIG_LVGL_MEM_POOL_KERNEL Kernel space lvgl pool
CONFIG_LVGL_MEM_POOL_MAX_SIZE Maximum memory pool block size
CONFIG_LVGL_MEM_POOL_MIN_SIZE Minimum memory pool block size
CONFIG_LVGL_MEM_POOL_NUMBER_BLOCKS Number of max size blocks in memory pool
CONFIG_LVGL_MEM_POOL_USER User space lvgl pool
CONFIG_LVGL_OBJ_ARC Arc Object
CONFIG_LVGL_OBJ_BAR Bar object
CONFIG_LVGL_OBJ_BUTTON Button object
CONFIG_LVGL_OBJ_BUTTON_INK_EFFECT Enable ink effect
CONFIG_LVGL_OBJ_BUTTON_MATRIX Button Matrix object
CONFIG_LVGL_OBJ_CALENDAR Calendar object
CONFIG_LVGL_OBJ_CANVAS Canvas object
CONFIG_LVGL_OBJ_CHART Chart object
CONFIG_LVGL_OBJ_CHART_AXIS_TICK_LABEL_MAX_LEN Maximum length of axis label
CONFIG_LVGL_OBJ_CHECK_BOX Check box object
CONFIG_LVGL_OBJ_CONTAINER Container Object
CONFIG_LVGL_OBJ_DROP_DOWN_LIST Drop Down List object
CONFIG_LVGL_OBJ_DROP_DOWN_LIST_ANIM_TIME Drop Down list animation time
CONFIG_LVGL_OBJ_GAUGE Gauge object
CONFIG_LVGL_OBJ_IMAGE Image Object
CONFIG_LVGL_OBJ_IMG_BUTTON Image Button
CONFIG_LVGL_OBJ_IMG_BUTTON_TILED Image button tile support
CONFIG_LVGL_OBJ_KEYBOARD Keyboard object
CONFIG_LVGL_OBJ_LABEL Label Object
CONFIG_LVGL_OBJ_LABEL_LONG_TXT_HINT Enable long text hint for labels
CONFIG_LVGL_OBJ_LABEL_SCROLL_SPEED Label scroll speed
CONFIG_LVGL_OBJ_LABEL_TEXT_SEL Enable label text selection
CONFIG_LVGL_OBJ_LABEL_WAIT_CHAR_COUNT Waiting period for label animation
CONFIG_LVGL_OBJ_LED LED object
CONFIG_LVGL_OBJ_LINE Line Object
CONFIG_LVGL_OBJ_LINE_METER Line meter object
CONFIG_LVGL_OBJ_LIST List object
CONFIG_LVGL_OBJ_LIST_FOCUS_TIME List focus time
CONFIG_LVGL_OBJ_MSG_BOX Message box object
CONFIG_LVGL_OBJ_PAGE Page object
CONFIG_LVGL_OBJ_PAGE_DEF_ANIM_TIME Default page focus animation time
CONFIG_LVGL_OBJ_PRELOAD Pre-load object
CONFIG_LVGL_OBJ_PRELOAD_DEF_ANIMATION_FILL Fill
CONFIG_LVGL_OBJ_PRELOAD_DEF_ANIMATION_SPIN_ARC Spinning Arc
CONFIG_LVGL_OBJ_PRELOAD_DEF_ARC_LENGTH Default arc length
CONFIG_LVGL_OBJ_PRELOAD_DEF_SPIN_TIME Default spin time
CONFIG_LVGL_OBJ_REALIGN Object realign support
CONFIG_LVGL_OBJ_ROLLER Roller object
CONFIG_LVGL_OBJ_ROLLER_ANIM_TIME Roller animation time
CONFIG_LVGL_OBJ_ROLLER_INF_PAGES Number of pages for infinite roller
CONFIG_LVGL_OBJ_SLIDER Slider object
CONFIG_LVGL_OBJ_SPINBOX Spinbox object
CONFIG_LVGL_OBJ_SWITCH Switch object
CONFIG_LVGL_OBJ_TABLE Table object
CONFIG_LVGL_OBJ_TABLE_COLUMN_MAX Maximum number of table columns
CONFIG_LVGL_OBJ_TAB_VIEW Tab view object
CONFIG_LVGL_OBJ_TAB_VIEW_ANIMATION_TIME Tab view animation time
CONFIG_LVGL_OBJ_TEXT_AREA Text area object
CONFIG_LVGL_OBJ_TEXT_AREA_CURSOR_BLINK_TIME Cursor Blink Time
CONFIG_LVGL_OBJ_TEXT_AREA_PWD_SHOW_TIME Label scroll speed
CONFIG_LVGL_OBJ_TILE_VIEW Tile view object
CONFIG_LVGL_OBJ_TILE_VIEW_ANIMATION_TIME Tile view animation time
CONFIG_LVGL_OBJ_WINDOW Window object
CONFIG_LVGL_SCREEN_REFRESH_PERIOD Screen refresh period
CONFIG_LVGL_SHADOW Enable shadows
CONFIG_LVGL_TEXT_BREAK_CHARACTERS Text break characters
CONFIG_LVGL_THEMES Enable build-in themes
CONFIG_LVGL_THEME_ALIEN Enable alien theme support
CONFIG_LVGL_THEME_DEFAULT Enable default theme support
CONFIG_LVGL_THEME_LIVE_UPDATE Enable runtime theme switching
CONFIG_LVGL_THEME_MATERIAL Enable material theme support
CONFIG_LVGL_THEME_MONO Enable mono theme support
CONFIG_LVGL_THEME_NEMO Enable nemo theme support
CONFIG_LVGL_THEME_NIGHT Enable night theme support
CONFIG_LVGL_THEME_ZEN Enable zen theme support
CONFIG_LVGL_TXT_ENC_ASCII ASCII string encoding
CONFIG_LVGL_TXT_ENC_UTF8 UTF-8 string encoding
CONFIG_LVGL_VDB_SIZE Rendering buffer size
CONFIG_LVGL_VER_RES Vertical Screen Resolution
CONFIG_LWM2M OMA LWM2M protocol stack
CONFIG_LWM2M_COAP_BLOCK_SIZE LWM2M CoAP block-wise transfer size
CONFIG_LWM2M_CONN_MON_APN_MAX Maximum # of APN resource instances
CONFIG_LWM2M_CONN_MON_BEARER_MAX Maximum # of available network bearer resource instances
CONFIG_LWM2M_CONN_MON_OBJ_SUPPORT Connectivity Monitoring object support
CONFIG_LWM2M_DEVICE_ERROR_CODE_MAX Maximum # of device obj error codes to store
CONFIG_LWM2M_DEVICE_PWRSRC_MAX Maximum # of device power source records
CONFIG_LWM2M_DTLS_SUPPORT Enable DTLS support in the LwM2M client
CONFIG_LWM2M_ENGINE_DEFAULT_LIFETIME LWM2M engine default server connection lifetime
CONFIG_LWM2M_ENGINE_MAX_MESSAGES LWM2M engine max. message object
CONFIG_LWM2M_ENGINE_MAX_OBSERVER Maximum # of observable LWM2M resources
CONFIG_LWM2M_ENGINE_MAX_PENDING LWM2M engine max. pending objects
CONFIG_LWM2M_ENGINE_MAX_REPLIES LWM2M engine max. reply objects
CONFIG_LWM2M_ENGINE_MESSAGE_HEADER_SIZE Room for CoAP header data
CONFIG_LWM2M_ENGINE_STACK_SIZE LWM2M engine stack size
CONFIG_LWM2M_FIRMWARE_UPDATE_OBJ_SUPPORT Firmware Update object support
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_ADDR CoAP proxy network address
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_SUPPORT Firmware Update object pull via CoAP-CoAP/HTTP proxy support
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT LWM2M client firmware pull local port
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_SUPPORT Firmware Update object pull support
CONFIG_LWM2M_IPSO_ACCELEROMETER IPSO Accelerometer Support
CONFIG_LWM2M_IPSO_ACCELEROMETER_INSTANCE_COUNT Maximum # of IPSO Accelerometer object instances
CONFIG_LWM2M_IPSO_BUZZER IPSO Buzzer Support
CONFIG_LWM2M_IPSO_BUZZER_INSTANCE_COUNT Maximum # of IPSO Buzzer instances
CONFIG_LWM2M_IPSO_LIGHT_CONTROL IPSO Light Control Support
CONFIG_LWM2M_IPSO_LIGHT_CONTROL_INSTANCE_COUNT Maximum # of IPSO Light Control object instances
CONFIG_LWM2M_IPSO_ONOFF_SWITCH IPSO On/Off Switch Support
CONFIG_LWM2M_IPSO_ONOFF_SWITCH_INSTANCE_COUNT Maximum # of IPSO On/Off Switch object instances
CONFIG_LWM2M_IPSO_PUSH_BUTTON IPSO Push Button Support
CONFIG_LWM2M_IPSO_PUSH_BUTTON_INSTANCE_COUNT Maximum # of IPSO On/Off Switch object instances
CONFIG_LWM2M_IPSO_SUPPORT IPSO Alliance Smart Object Support
CONFIG_LWM2M_IPSO_TEMP_SENSOR IPSO Temperature Sensor Support
CONFIG_LWM2M_IPSO_TEMP_SENSOR_INSTANCE_COUNT Maximum # of IPSO Temperature Sensor object instances
CONFIG_LWM2M_IPSO_TIMER IPSO Light Control Support
CONFIG_LWM2M_IPSO_TIMER_INSTANCE_COUNT Maximum # of IPSO Timer object instances
CONFIG_LWM2M_LOCAL_PORT LWM2M client port
CONFIG_LWM2M_LOCATION_OBJ_SUPPORT Location object support
CONFIG_LWM2M_LOG_LEVEL  
CONFIG_LWM2M_LOG_LEVEL_DBG Debug
CONFIG_LWM2M_LOG_LEVEL_DEFAULT Default
CONFIG_LWM2M_LOG_LEVEL_ERR Error
CONFIG_LWM2M_LOG_LEVEL_INF Info
CONFIG_LWM2M_LOG_LEVEL_OFF Off
CONFIG_LWM2M_LOG_LEVEL_WRN Warning
CONFIG_LWM2M_NUM_ATTR Maximum # of LWM2M attributes
CONFIG_LWM2M_NUM_BLOCK1_CONTEXT Maximum # of LWM2M block1 contexts
CONFIG_LWM2M_PEER_PORT LWM2M server port
CONFIG_LWM2M_RD_CLIENT_SUPPORT support for LWM2M client bootstrap/registration state machine
CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP Enable bootstrap support
CONFIG_LWM2M_RW_JSON_SUPPORT support for JSON writer
CONFIG_LWM2M_SECURITY_INSTANCE_COUNT Maximum # of LWM2M Security object instances
CONFIG_LWM2M_SECURITY_KEY_SIZE Buffer size of the security key resources
CONFIG_LWM2M_SERVER_DEFAULT_PMAX Default server record PMAX
CONFIG_LWM2M_SERVER_DEFAULT_PMIN Default server record PMIN
CONFIG_LWM2M_SERVER_INSTANCE_COUNT Maximum # of LWM2M Server object instances
CONFIG_MAIN_STACK_SIZE Size of stack for initialization and main thread
CONFIG_MAIN_THREAD_PRIORITY Priority of initialization/main thread
CONFIG_MASS_STORAGE_BULK_EP_MPS  
CONFIG_MASS_STORAGE_DISK_NAME Mass storage disk or drive name
CONFIG_MAX30101 MAX30101 Pulse Oximeter and Heart Rate Sensor
CONFIG_MAX30101_ADC_RGE ADC range control
CONFIG_MAX30101_FIFO_A_FULL FIFO almost full value
CONFIG_MAX30101_FIFO_ROLLOVER_EN FIFO rolls on full
CONFIG_MAX30101_HEART_RATE_MODE Heart rate mode
CONFIG_MAX30101_LED1_PA LED1 (red) pulse amplitude
CONFIG_MAX30101_LED2_PA LED2 (IR) pulse amplitude
CONFIG_MAX30101_LED3_PA LED2 (green) pulse amplitude
CONFIG_MAX30101_MULTI_LED_MODE Multi-LED mode
CONFIG_MAX30101_SLOT1 Slot 1
CONFIG_MAX30101_SLOT2 Slot 2
CONFIG_MAX30101_SLOT3 Slot 3
CONFIG_MAX30101_SLOT4 Slot 4
CONFIG_MAX30101_SMP_AVE Sample averaging
CONFIG_MAX30101_SPO2_MODE SpO2 mode
CONFIG_MAX30101_SR ADC sample rate control
CONFIG_MAX44009 MAX44009 Light Sensor
CONFIG_MAX44009_DRV_NAME Driver name
CONFIG_MAX44009_I2C_ADDR MAX44009 I2C address
CONFIG_MAX44009_I2C_DEV_NAME I2C master where MAX44009 is connected
CONFIG_MAX_DOMAIN_PARTITIONS Maximum number of partitions per memory domain
CONFIG_MAX_IRQ_LINES Number of IRQ lines
CONFIG_MAX_IRQ_PER_AGGREGATOR Max IRQs per interrupt aggregator
CONFIG_MAX_PTHREAD_COUNT Maximum simultaneously active pthread count in POSIX application
CONFIG_MAX_THREAD_BYTES Bytes to use when tracking object thread permissions
CONFIG_MAX_TIMER_COUNT Maximum timer count in POSIX application
CONFIG_MBEDTLS mbedTLS Support
CONFIG_MBEDTLS_AES_ROM_TABLES Use precomputed AES tables stored in ROM. / Use precomputed AES tables stored in ROM.
CONFIG_MBEDTLS_BUILTIN Enable mbedTLS integrated sources
CONFIG_MBEDTLS_CFG_FILE mbed TLS configuration file
CONFIG_MBEDTLS_CHACHAPOLY_AEAD_ENABLED Enable the ChaCha20-Poly1305 AEAD algorithm / Enable the ChaCha20-Poly1305 AEAD algorithm
CONFIG_MBEDTLS_CIPHER_AES_ENABLED Enable the AES block cipher / Enable the AES block cipher
CONFIG_MBEDTLS_CIPHER_ALL_ENABLED Enable all available ciphers / Enable all available ciphers
CONFIG_MBEDTLS_CIPHER_ARC4_ENABLED Enable the ARC4 stream cipher / Enable the ARC4 stream cipher
CONFIG_MBEDTLS_CIPHER_BLOWFISH_ENABLED Enable the Blowfish block cipher / Enable the Blowfish block cipher
CONFIG_MBEDTLS_CIPHER_CAMELLIA_ENABLED Enable the Camellia block cipher / Enable the Camellia block cipher
CONFIG_MBEDTLS_CIPHER_CBC_ENABLED Enable Cipher Block Chaining mode (CBC) for symmetric ciphers / Enable Cipher Block Chaining mode (CBC) for symmetric ciphers
CONFIG_MBEDTLS_CIPHER_CCM_ENABLED Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher / Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher
CONFIG_MBEDTLS_CIPHER_CHACHA20_ENABLED Enable the ChaCha20 stream cipher / Enable the ChaCha20 stream cipher
CONFIG_MBEDTLS_CIPHER_DES_ENABLED Enable the DES block cipher / Enable the DES block cipher
CONFIG_MBEDTLS_CIPHER_MODE_GCM_ENABLED Enable the Galois/Counter Mode (GCM) for AES / Enable the Galois/Counter Mode (GCM) for AES
CONFIG_MBEDTLS_CIPHER_MODE_XTS_ENABLED Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES / Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES
CONFIG_MBEDTLS_CTR_DRBG_ENABLED Enable the CTR_DRBG AES-256-based random generator / Enable the CTR_DRBG AES-256-based random generator
CONFIG_MBEDTLS_DEBUG mbed TLS debug activation
CONFIG_MBEDTLS_DEBUG_LEVEL mbed TLS default debug level
CONFIG_MBEDTLS_DTLS Enable support for DTLS / Enable support for DTLS
CONFIG_MBEDTLS_ECP_ALL_ENABLED Enable all available elliptic curves / Enable all available elliptic curves
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED Enable BP256R1 elliptic curve / Enable BP256R1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED Enable BP384R1 elliptic curve / Enable BP384R1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED Enable BP512R1 elliptic curve / Enable BP512R1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED Enable CURVE25519 elliptic curve / Enable CURVE25519 elliptic curve
CONFIG_MBEDTLS_ECP_DP_CURVE448_ENABLED Enable CURVE448 elliptic curve / Enable CURVE448 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED Enable SECP192K1 elliptic curve / Enable SECP192K1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED Enable SECP192R1 elliptic curve / Enable SECP192R1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED Enable SECP224K1 elliptic curve / Enable SECP224K1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED Enable SECP224R1 elliptic curve / Enable SECP224R1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED Enable SECP256K1 elliptic curve / Enable SECP256K1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED Enable SECP256R1 elliptic curve / Enable SECP256R1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED Enable SECP384R1 elliptic curve / Enable SECP384R1 elliptic curve
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED Enable SECP521R1 elliptic curve / Enable SECP521R1 elliptic curve
CONFIG_MBEDTLS_ECP_NIST_OPTIM Enable NSIT curves optimization / Enable NSIT curves optimization
CONFIG_MBEDTLS_ENABLE_HEAP Enable global heap for mbed TLS
CONFIG_MBEDTLS_ENTROPY_ENABLED Enable mbedTLS generic entropy pool / Enable mbedTLS generic entropy pool
CONFIG_MBEDTLS_GENPRIME_ENABLED Enable the prime-number generation code. / Enable the prime-number generation code.
CONFIG_MBEDTLS_HAVE_ASM Enable use of assembly code / Enable use of assembly code
CONFIG_MBEDTLS_HEAP_SIZE Heap size for mbed TLS
CONFIG_MBEDTLS_HMAC_DRBG_ENABLED Enable the HMAC_DRBG random generator / Enable the HMAC_DRBG random generator
CONFIG_MBEDTLS_INSTALL_PATH mbedTLS install path
CONFIG_MBEDTLS_KEY_EXCHANGE_ALL_ENABLED Enable all available ciphersuite modes / Enable all available ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED Enable the DHE-PSK based ciphersuite modes / Enable the DHE-PSK based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED Enable the DHE-RSA based ciphersuite modes / Enable the DHE-RSA based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED Enable the ECDHE-ECDSA based ciphersuite modes / Enable the ECDHE-ECDSA based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED Enable the ECDHE-PSK based ciphersuite modes / Enable the ECDHE-PSK based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED Enable the ECDHE-RSA based ciphersuite modes / Enable the ECDHE-RSA based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED Enable the ECDH-ECDSA based ciphersuite modes / Enable the ECDH-ECDSA based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED Enable the ECDH-RSA based ciphersuite modes / Enable the ECDH-RSA based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED Enable the ECJPAKE based ciphersuite modes / Enable the ECJPAKE based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK_ENABLED Enable the PSK based ciphersuite modes / Enable the PSK based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_ENABLED Enable the RSA-only based ciphersuite modes / Enable the RSA-only based ciphersuite modes
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED Enable the RSA-PSK based ciphersuite modes / Enable the RSA-PSK based ciphersuite modes
CONFIG_MBEDTLS_LIBRARY Enable mbedTLS external library
CONFIG_MBEDTLS_MAC_ALL_ENABLED Enable all available MAC methods / Enable all available MAC methods
CONFIG_MBEDTLS_MAC_CMAC_ENABLED Enable the CMAC (Cipher-based Message Authentication Code) mode for block ciphers. / Enable the CMAC (Cipher-based Message Authentication Code) mode for block ciphers.
CONFIG_MBEDTLS_MAC_MD4_ENABLED Enable the MD4 hash algorithm / Enable the MD4 hash algorithm
CONFIG_MBEDTLS_MAC_MD5_ENABLED Enable the MD5 hash algorithm / Enable the MD5 hash algorithm
CONFIG_MBEDTLS_MAC_POLY1305_ENABLED Enable the Poly1305 MAC algorithm / Enable the Poly1305 MAC algorithm
CONFIG_MBEDTLS_MAC_SHA1_ENABLED Enable the SHA1 hash algorithm / Enable the SHA1 hash algorithm
CONFIG_MBEDTLS_MAC_SHA256_ENABLED Enable the SHA-224 and SHA-256 hash algorithms / Enable the SHA-224 and SHA-256 hash algorithms
CONFIG_MBEDTLS_MAC_SHA512_ENABLED Enable the SHA-384 and SHA-512 hash algorithms / Enable the SHA-384 and SHA-512 hash algorithms
CONFIG_MBEDTLS_PEM_CERTIFICATE_FORMAT Enable support for PEM certificate format / Enable support for PEM certificate format
CONFIG_MBEDTLS_SHA256_SMALLER Enable smaller SHA-256 implementation / Enable smaller SHA-256 implementation
CONFIG_MBEDTLS_SSL_EXPORT_KEYS Enable support for exporting SSL key block and master secret / Enable support for exporting SSL key block and master secret
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN Max payload size for TLS protocol message
CONFIG_MBEDTLS_TEST Compile internal self test functions
CONFIG_MBEDTLS_TLS_VERSION_1_0 Enable support for TLS 1.0 / Enable support for TLS 1.0
CONFIG_MBEDTLS_TLS_VERSION_1_1 Enable support for TLS 1.1 (DTLS 1.0) / Enable support for TLS 1.1 (DTLS 1.0)
CONFIG_MBEDTLS_TLS_VERSION_1_2 Enable support for TLS 1.2 (DTLS 1.2) / Enable support for TLS 1.2 (DTLS 1.2)
CONFIG_MBEDTLS_USER_CONFIG_ENABLE Enable user mbedTLS config file / Enable user mbedTLS config file
CONFIG_MBEDTLS_USER_CONFIG_FILE User configuration file for mbedTLS / User configuration file for mbedTLS
CONFIG_MCG_FCRDIV Fast internal reference clock divider
CONFIG_MCG_FRDIV FLL external reference divider
CONFIG_MCG_PRDIV0 PLL external reference divider
CONFIG_MCG_VDIV0 VCO 0 divider
CONFIG_MCHP_XEC_RTOS_TIMER Microchip XEC series RTOS timer
CONFIG_MCP9808 MCP9808 temperature sensor
CONFIG_MCP9808_DEV_NAME MCP9808 device name
CONFIG_MCP9808_GPIO_CONTROLLER GPIO controller for MCP9808 interrupt
CONFIG_MCP9808_GPIO_PIN GPIO pin for MCP9808 interrupt
CONFIG_MCP9808_I2C_ADDR MCP9808 I2C slave address
CONFIG_MCP9808_I2C_DEV_NAME I2C master where MCP9808 is connected
CONFIG_MCP9808_THREAD_PRIORITY MCP9808 thread priority
CONFIG_MCP9808_THREAD_STACK_SIZE Sensor delayed work thread stack size
CONFIG_MCP9808_TRIGGER  
CONFIG_MCP9808_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_MCP9808_TRIGGER_NONE No trigger
CONFIG_MCP9808_TRIGGER_OWN_THREAD Use own thread
CONFIG_MCR20A_CLK_OUT_16MHZ 16 MHz
CONFIG_MCR20A_CLK_OUT_1MHZ 1 MHz
CONFIG_MCR20A_CLK_OUT_250KHZ 250 kHz
CONFIG_MCR20A_CLK_OUT_32768HZ 32768 Hz
CONFIG_MCR20A_CLK_OUT_32MHZ 32 MHz
CONFIG_MCR20A_CLK_OUT_4MHZ 4 MHz
CONFIG_MCR20A_CLK_OUT_62500HZ 62500 Hz
CONFIG_MCR20A_CLK_OUT_8MHZ 8 MHz
CONFIG_MCR20A_CLK_OUT_DISABLED Disabled
CONFIG_MCR20A_IS_PART_OF_KW2XD_SIP MCR20A device is part of KW2xD SiP
CONFIG_MCUBOOT_IMG_MANAGER Image manager for mcuboot
CONFIG_MCUBOOT_TRAILER_SWAP_TYPE use trailer’s swap_type field
CONFIG_MCUMGR mcumgr Support
CONFIG_MCUMGR_BUF_COUNT Number of mcumgr buffers
CONFIG_MCUMGR_BUF_SIZE Size of each mcumgr buffer
CONFIG_MCUMGR_BUF_USER_DATA_SIZE Size of mcumgr buffer user data
CONFIG_MCUMGR_CMD_FS_MGMT Enable mcumgr handlers for file management
CONFIG_MCUMGR_CMD_IMG_MGMT Enable mcumgr handlers for image management
CONFIG_MCUMGR_CMD_LOG_MGMT Enable mcumgr handlers for log management
CONFIG_MCUMGR_CMD_OS_MGMT Enable mcumgr handlers for OS management
CONFIG_MCUMGR_CMD_STAT_MGMT Enable mcumgr handlers for statistics management
CONFIG_MCUMGR_SMP_BT Bluetooth mcumgr SMP transport
CONFIG_MCUMGR_SMP_SHELL Shell mcumgr SMP transport
CONFIG_MCUMGR_SMP_SHELL_MTU Shell SMP MTU
CONFIG_MCUMGR_SMP_UART UART mcumgr SMP transport
CONFIG_MCUMGR_SMP_UART_MTU UART SMP MTU
CONFIG_MCUX_ELCDIF_PANEL_RK043FN02H Rocktech rk043fn02h-ct
CONFIG_MCUX_ELCDIF_POOL_BLOCK_ALIGN Alignment of memory pool blocks
CONFIG_MCUX_ELCDIF_POOL_BLOCK_MAX Maximum memory pool block size
CONFIG_MCUX_ELCDIF_POOL_BLOCK_MIN Minimum memory pool block size
CONFIG_MCUX_ELCDIF_POOL_BLOCK_NUM Number of memory pool blocks
CONFIG_MDNS_RESOLVER Enable mDNS support
CONFIG_MDNS_RESOLVER_ADDITIONAL_BUF_CTR Additional DNS buffers
CONFIG_MDNS_RESPONDER mDNS responder
CONFIG_MDNS_RESPONDER_INIT_PRIO Startup priority for the mDNS responder init
CONFIG_MDNS_RESPONDER_LOG_LEVEL  
CONFIG_MDNS_RESPONDER_LOG_LEVEL_DBG Debug
CONFIG_MDNS_RESPONDER_LOG_LEVEL_DEFAULT Default
CONFIG_MDNS_RESPONDER_LOG_LEVEL_ERR Error
CONFIG_MDNS_RESPONDER_LOG_LEVEL_INF Info
CONFIG_MDNS_RESPONDER_LOG_LEVEL_OFF Off
CONFIG_MDNS_RESPONDER_LOG_LEVEL_WRN Warning
CONFIG_MDNS_RESPONDER_TTL Time-to-Live of returned DNS name
CONFIG_MEMORY_PROTECTION  
CONFIG_MICROBIT_DISPLAY BBC micro:bit 5x5 LED Display support
CONFIG_MICROBIT_DISPLAY_STR_MAX Maximum length of strings that can be shown on the display
CONFIG_MINIMAL_LIBC_LL_PRINTF Build with minimal libc long long printf
CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE Size of the minimal libc malloc arena
CONFIG_MISRA_SANE MISRA standards compliance features
CONFIG_MODEM Modem Drivers
CONFIG_MODEM_CMD_HANDLER Generic modem command handler
CONFIG_MODEM_CMD_HANDLER_MAX_PARAM_COUNT Maximum number of params parsed per command
CONFIG_MODEM_CONTEXT Modem context helper driver [EXPERIMENTAL]
CONFIG_MODEM_CONTEXT_MAX_NUM Maximum number of modem contexts
CONFIG_MODEM_CONTEXT_VERBOSE_DEBUG Verbose debug output in the modem context
CONFIG_MODEM_IFACE_UART UART-based modem interface
CONFIG_MODEM_LOG_LEVEL  
CONFIG_MODEM_LOG_LEVEL_DBG Debug
CONFIG_MODEM_LOG_LEVEL_ERR Error
CONFIG_MODEM_LOG_LEVEL_INF Info
CONFIG_MODEM_LOG_LEVEL_OFF Off
CONFIG_MODEM_LOG_LEVEL_WRN Warning
CONFIG_MODEM_RECEIVER Enable modem receiver helper driver
CONFIG_MODEM_RECEIVER_MAX_CONTEXTS Maximum number of modem receiver contexts
CONFIG_MODEM_SHELL Enable modem shell utilities
CONFIG_MODEM_SOCKET Generic modem socket support layer
CONFIG_MODEM_SOCKET_PACKET_COUNT Maximum number of stored packet sizes per socket
CONFIG_MODEM_UBLOX_SARA Enable u-blox SARA modem driver
CONFIG_MODEM_UBLOX_SARA_R4 u-blox SARA-R4
CONFIG_MODEM_UBLOX_SARA_R4_APN APN for establishing network connection
CONFIG_MODEM_UBLOX_SARA_R4_INIT_PRIORITY u-blox SARA-R4 driver init priority
CONFIG_MODEM_UBLOX_SARA_R4_MANUAL_MCCMNO MCC/MNOfor establishing network connection
CONFIG_MODEM_UBLOX_SARA_R4_NAME Driver name
CONFIG_MODEM_UBLOX_SARA_R4_RX_STACK_SIZE Stack size for the u-blox SARA-R4 modem driver RX thread
CONFIG_MODEM_UBLOX_SARA_R4_RX_WORKQ_STACK_SIZE Stack size for the u-blox SARA-R4 modem driver work queue
CONFIG_MODEM_UBLOX_SARA_U2 u-blox SARA-U2
CONFIG_MODEM_WNCM14A2A Enable Wistron LTE-M modem driver
CONFIG_MODEM_WNCM14A2A_APN_NAME APN name for establishing network connection
CONFIG_MODEM_WNCM14A2A_INIT_PRIORITY WNC-M14A2A driver init priority
CONFIG_MODEM_WNCM14A2A_RX_STACK_SIZE Size of the stack for the WNC-M14A2A modem driver RX thread
CONFIG_MODEM_WNCM14A2A_RX_WORKQ_STACK_SIZE Size of the stack for the WNC-M14A2A modem driver work queue
CONFIG_MPU6050 MPU6050 Six-Axis Motion Tracking Device
CONFIG_MPU6050_ACCEL_FS Accelerometer full-scale range
CONFIG_MPU6050_GPIO_DEV_NAME GPIO device
CONFIG_MPU6050_GPIO_PIN_NUM Interrupt GPIO pin number
CONFIG_MPU6050_GYRO_FS Gyroscope full-scale range
CONFIG_MPU6050_I2C_ADDR I2C address
CONFIG_MPU6050_I2C_MASTER_DEV_NAME I2C master where MPU6050 is connected
CONFIG_MPU6050_NAME Driver name
CONFIG_MPU6050_THREAD_PRIORITY Thread priority
CONFIG_MPU6050_THREAD_STACK_SIZE Thread stack size
CONFIG_MPU6050_TRIGGER  
CONFIG_MPU6050_TRIGGER_GLOBAL_THREAD Use global thread
CONFIG_MPU6050_TRIGGER_NONE No trigger
CONFIG_MPU6050_TRIGGER_OWN_THREAD Use own thread
CONFIG_MPU9150 Enable MPU9180 support
CONFIG_MPU9150_I2C_ADDR MPU9180 I2C address
CONFIG_MPU_ALLOW_FLASH_WRITE Add MPU access to write to flash
CONFIG_MPU_LOG_LEVEL  
CONFIG_MPU_LOG_LEVEL_DBG Debug
CONFIG_MPU_LOG_LEVEL_ERR Error
CONFIG_MPU_LOG_LEVEL_INF Info
CONFIG_MPU_LOG_LEVEL_OFF Off
CONFIG_MPU_LOG_LEVEL_WRN Warning
CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS  
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT  
CONFIG_MPU_STACK_GUARD Thread Stack Guards / Thread Stack Guards
CONFIG_MPU_STACK_GUARD_MIN_SIZE_FLOAT  
CONFIG_MP_NUM_CPUS Number of CPUs/cores
CONFIG_MQTT_KEEPALIVE Maximum number of clients Keep alive time for MQTT (in seconds)
CONFIG_MQTT_LIB Socket MQTT Library Support
CONFIG_MQTT_LIB_TLS TLS support for socket MQTT Library
CONFIG_MQTT_LOG_LEVEL  
CONFIG_MQTT_LOG_LEVEL_DBG Debug
CONFIG_MQTT_LOG_LEVEL_DEFAULT Default
CONFIG_MQTT_LOG_LEVEL_ERR Error
CONFIG_MQTT_LOG_LEVEL_INF Info
CONFIG_MQTT_LOG_LEVEL_OFF Off
CONFIG_MQTT_LOG_LEVEL_WRN Warning
CONFIG_MQUEUE_NAMELEN_MAX Maximum size of a name length
CONFIG_MS5837 MS5837 pressure and temperature sensor
CONFIG_MSG_COUNT_MAX Maximum number of messages in message queue
CONFIG_MSG_SIZE_MAX Maximum size of a message
CONFIG_MULTITHREADING Multi-threading
CONFIG_MULTI_LEVEL_INTERRUPTS Multi-level interrupt support
CONFIG_NATIVE_APPLICATION Build as a native host application
CONFIG_NATIVE_POSIX_CONSOLE Use the host terminal for console
CONFIG_NATIVE_POSIX_CONSOLE_INIT_PRIORITY Init priority
CONFIG_NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME Slow down execution to real time
CONFIG_NATIVE_POSIX_STDIN_CONSOLE Use the host terminal stdin
CONFIG_NATIVE_POSIX_STDOUT_CONSOLE Print to the host terminal stdout
CONFIG_NATIVE_POSIX_TIMER (POSIX) native_posix timer driver
CONFIG_NATIVE_STDIN_POLL_PERIOD Polling period for stdin
CONFIG_NATIVE_STDIN_PRIO Priority of the stdin polling thread
CONFIG_NATIVE_UART_0_ON_OWN_PTY Connect the UART to its own pseudo terminal
CONFIG_NATIVE_UART_0_ON_STDINOUT Connect the UART to the invoking shell stdin/stdout
CONFIG_NATIVE_UART_AUTOATTACH_DEFAULT_CMD Default command to attach the UART to a new terminal
CONFIG_NESTED_INTERRUPTS Enable nested interrupts
CONFIG_NETWORKING Link layer and IP networking support
CONFIG_NET_6LO Enable 6lowpan IPv6 Compression library
CONFIG_NET_6LO_CONTEXT Enable 6lowpan context based compression
CONFIG_NET_6LO_LOG_LEVEL  
CONFIG_NET_6LO_LOG_LEVEL_DBG Debug
CONFIG_NET_6LO_LOG_LEVEL_DEFAULT Default
CONFIG_NET_6LO_LOG_LEVEL_ERR Error
CONFIG_NET_6LO_LOG_LEVEL_INF Info
CONFIG_NET_6LO_LOG_LEVEL_OFF Off
CONFIG_NET_6LO_LOG_LEVEL_WRN Warning
CONFIG_NET_ARP Enable ARP
CONFIG_NET_ARP_GRATUITOUS Support gratuitous ARP requests/replies.
CONFIG_NET_ARP_LOG_LEVEL  
CONFIG_NET_ARP_LOG_LEVEL_DBG Debug
CONFIG_NET_ARP_LOG_LEVEL_DEFAULT Default
CONFIG_NET_ARP_LOG_LEVEL_ERR Error
CONFIG_NET_ARP_LOG_LEVEL_INF Info
CONFIG_NET_ARP_LOG_LEVEL_OFF Off
CONFIG_NET_ARP_LOG_LEVEL_WRN Warning
CONFIG_NET_ARP_TABLE_SIZE Number of entries in ARP table.
CONFIG_NET_BUF Network buffer support
CONFIG_NET_BUF_DATA_POOL_SIZE Size of the memory pool where buffers are allocated from
CONFIG_NET_BUF_DATA_SIZE Size of each network data fragment