nRF91 nrfx example¶
This sample demonstrates the usage of nrfx library in Zephyr. GPIOTE and DPPI are used as examples of nrfx drivers.
The code shows how to initialize the GPIOTE interrupt in Zephyr so that the nrfx_gpiote driver can use it. Additionally, it shows how the DPPI subsystem can be used to connect tasks and events of nRF peripherals, enabling those peripherals to interact with each other without any intervention from the CPU.
Zephyr GPIO driver is disabled to prevent it from registering its own handler
for the GPIOTE interrupt. Button 1 is configured to create an event when pushed.
This calls the
button_handler() callback and triggers the LED 1 pin OUT task.
LED is then toggled.
This sample has been tested on the NordicSemiconductor nRF9160 DK (nrf9160dk_nrf9160) board.
Building and Running¶
The code can be found in samples/boards/nrf/nrfx.
To build and flash the application:
west build -b nrf9160dk_nrf9160 samples/boards/nrf/nrfx west flash
Push Button 1 to toggle the LED 1.
Connect to the serial port - notice that each time the button is pressed,
button_handler() function is called.
See nrfx_repository for more information about nrfx.