This is the documentation for the latest (main) development branch of Zephyr. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

Broadcom BCM958402M2 (Cortex-A72)

Overview

The Broadcom bcm958402m2/bcm58402/a72 board utilizes the Viper BCM58402_A72 SoC to provide support for PCIe offload engine functionality.

Hardware

The bcm958402m2/bcm58402/a72 is a PCIe card with the following physical features:

• PCIe Gen4 interface

• RS232 UART (optionally populated)

• JTAG (optionally populated)

Supported Features

The Broadcom bcm958402m2/bcm58402/a72 board configuration supports the following hardware features:

Interface	Controller	Driver/Component
GIC-500	on-chip	GICv3 interrupt controller
UART	on-chip	NS16550 compatible serial port

Other hardware features have not been enabled yet for this board.

The default configuration can be found in boards/brcm/bcm958402m2/bcm958402m2_bcm58402_a72_defconfig

Programming and Debugging

Flashing

The flash on board is not supported by Zephyr at this time. Board is booted over PCIe interface.

Debugging

The bcm958402m2/bcm58402/a72 board includes pads for soldering a JTAG connector. Zephyr applications running on the Cortex-A72 core can also be tested by observing UART console output.