The latest development version of this page may be more current than this released 1.14.0 version.
CONFIG_CLOCK_STM32_PLL_R_DIVISOR

PLL R Divisor

Type: int

Help

PLL R Output divisor, allowed values: 0, 2, 4, 6, 8.

Kconfig definitions

At boards/arm/disco_l475_iot1/Kconfig.defconfig:53

Included via Kconfig:10 → Kconfig.zephyr:21

Menu path: (top menu)

config CLOCK_STM32_PLL_R_DIVISOR
    int
    default 4 if CLOCK_STM32_PLL_SRC_HSI && CLOCK_STM32_SYSCLK_SRC_PLL && BOARD_DISCO_L475_IOT1
    depends on CLOCK_STM32_PLL_SRC_HSI && CLOCK_STM32_SYSCLK_SRC_PLL && BOARD_DISCO_L475_IOT1

At drivers/clock_control/Kconfig.stm32:360

Included via Kconfig:10 → Kconfig.zephyr:35 → drivers/Kconfig:52 → drivers/clock_control/Kconfig:30

Menu path: (top menu) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control

config CLOCK_STM32_PLL_R_DIVISOR
    int
    prompt "PLL R Divisor" if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    range 0 8 if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    default 4 if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    depends on CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L4X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    help
      PLL R Output divisor, allowed values: 0, 2, 4, 6, 8.

(Definitions include propagated dependencies, including from if’s and menus.)