The latest development version of this page may be more current than this released 2.7.5 version.

nordic,nrf-sw-pwm¶

Description¶

nRFx S/W PWM

Properties¶

Properties not inherited from the base binding file.

Name	Type	Details
`generator`	`phandle`	Reference to TIMER or RTC instance for generating PWM output signals This property is required.
`channel-count`	`int`	Number of PWM channels. Limited by RTC/TIMER instance compare registers minus 1. This property is required.
`clock-prescaler`	`int`	Clock prescaler for RTC or TIMER used for generating PWM output signals. RTC: needs to be set to 0, which gives 32768 Hz base clock for PWM generation. TIMER: 16 MHz / 2^prescaler base clock is used for PWM generation. This property is required.
`ppi-base`	`int`	PPI base used for PPI index calculation used for PWM output generation This property is required.
`gpiote-base`	`int`	GPIOTE base used for GPIOTE index calculation used for PWM output generation This property is required.
`#pwm-cells`	`int`	Number of items to expect in a pwm specifier This property is required. Constant value: `1`

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-sw-pwm” compatible.

Name	Type	Details
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg`	`array`	register space See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts`	`array`	interrupts for device See Important properties for more information.
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.

Specifier cell names¶

pwm cells: channel