R-CAR Salvator XS M3 ARM CA57 (ARMv8)
Overview
The R-Car M3-W is an SOC that features the basic functions for next-generation car navigation systems.
Hardware
The R-Car M3-W includes:
two 1.5-GHz ARM Cortex-A57 MPCore cores;
four 1.3-GHz ARM Cortex-A53 MPCore cores,
memory controller for LPDDR4-3200 with 32 bits x 2 channels;
1 channels for HDMI1.4b output and 1 channel for RGB888 output and 1channel for LVDS;
2 channels MIPI-CSI2 Video Input, 2 channels digital Video Input;
USB3.0 x 1ch and USB2.0 x 2ch interfaces;
800-MHz ARM Cortex-R7 core;
two- and three-dimensional graphics engines;
video processing units;
sound processing units;
MediaLB interface;
SD card host interface;
USB3.0 and USB2.0 interfaces;
PCI Express interface;
CAN interface;
EtherAVB.
Supported Features
The Renesas rcar_salvator_xs board configuration supports the following hardware features:
Interface |
Driver/components |
Support level |
|---|---|---|
PINCTRL |
pinctrl |
|
CLOCK |
clock_control |
|
UART |
uart |
serial port-polling |
MMC |
renesas_rcar_mmc |
DMA and SCC |
Other hardware features have not been enabled yet for this board.
The default configuration can be found in boards/renesas/rcar_salvator_xs/rcar_salvator_xs_defconfig
Programming and Debugging
Build and flash applications as usual (see Building an Application and Run an Application for more details).