Data Structures
struct	lorawan_join_otaa
	LoRaWAN join parameters for over-the-Air activation (OTAA) More...

struct	lorawan_join_abp
	LoRaWAN join parameters for activation by personalization (ABP) More...

struct	lorawan_join_config
	LoRaWAN join parameters. More...

struct	lorawan_downlink_cb
	LoRaWAN downlink callback parameters. More...

Macros
#define	LW_RECV_PORT_ANY UINT16_MAX
	Flag to indicate receiving on any port.

Typedefs
typedef uint8_t(*	lorawan_battery_level_cb_t) (void)
	Defines the battery level callback handler function signature.

typedef void(*	lorawan_dr_changed_cb_t) (enum lorawan_datarate dr)
	Defines the datarate changed callback handler function signature.

Enumerations
enum	lorawan_class { LORAWAN_CLASS_A = 0x00 , LORAWAN_CLASS_B = 0x01 , LORAWAN_CLASS_C = 0x02 }
	LoRaWAN class types. More...

enum	lorawan_act_type { LORAWAN_ACT_OTAA = 0 , LORAWAN_ACT_ABP }
	LoRaWAN activation types. More...

enum	lorawan_channels_mask_size { LORAWAN_CHANNELS_MASK_SIZE_AS923 = 1 , LORAWAN_CHANNELS_MASK_SIZE_AU915 = 6 , LORAWAN_CHANNELS_MASK_SIZE_CN470 = 6 , LORAWAN_CHANNELS_MASK_SIZE_CN779 = 1 , LORAWAN_CHANNELS_MASK_SIZE_EU433 = 1 , LORAWAN_CHANNELS_MASK_SIZE_EU868 = 1 , LORAWAN_CHANNELS_MASK_SIZE_KR920 = 1 , LORAWAN_CHANNELS_MASK_SIZE_IN865 = 1 , LORAWAN_CHANNELS_MASK_SIZE_US915 = 6 , LORAWAN_CHANNELS_MASK_SIZE_RU864 = 1 }
	LoRaWAN channels mask sizes. More...

enum	lorawan_datarate { LORAWAN_DR_0 = 0 , LORAWAN_DR_1 , LORAWAN_DR_2 , LORAWAN_DR_3 , LORAWAN_DR_4 , LORAWAN_DR_5 , LORAWAN_DR_6 , LORAWAN_DR_7 , LORAWAN_DR_8 , LORAWAN_DR_9 , LORAWAN_DR_10 , LORAWAN_DR_11 , LORAWAN_DR_12 , LORAWAN_DR_13 , LORAWAN_DR_14 , LORAWAN_DR_15 }
	LoRaWAN datarate types. More...

enum	lorawan_region { LORAWAN_REGION_AS923 , LORAWAN_REGION_AU915 , LORAWAN_REGION_CN470 , LORAWAN_REGION_CN779 , LORAWAN_REGION_EU433 , LORAWAN_REGION_EU868 , LORAWAN_REGION_KR920 , LORAWAN_REGION_IN865 , LORAWAN_REGION_US915 , LORAWAN_REGION_RU864 }
	LoRaWAN region types. More...

enum	lorawan_message_type { LORAWAN_MSG_UNCONFIRMED = 0 , LORAWAN_MSG_CONFIRMED }
	LoRaWAN message types. More...

Functions
void	lorawan_register_battery_level_callback (lorawan_battery_level_cb_t cb)
	Register a battery level callback function.

void	lorawan_register_downlink_callback (struct lorawan_downlink_cb *cb)
	Register a callback to be run on downlink packets.

void	lorawan_register_dr_changed_callback (lorawan_dr_changed_cb_t cb)
	Register a callback to be called when the datarate changes.

int	lorawan_join (const struct lorawan_join_config *config)
	Join the LoRaWAN network.

int	lorawan_start (void)
	Start the LoRaWAN stack.

int	lorawan_send (uint8_t port, uint8_t *data, uint8_t len, enum lorawan_message_type type)
	Send data to the LoRaWAN network.

int	lorawan_set_class (enum lorawan_class dev_class)
	Set the current device class.

int	lorawan_set_conf_msg_tries (uint8_t tries)
	Set the number of tries used for transmissions.

void	lorawan_enable_adr (bool enable)
	Enable Adaptive Data Rate (ADR)

int	lorawan_set_channels_mask (uint16_t *channels_mask, size_t channels_mask_size)
	Set the channels mask.

int	lorawan_set_datarate (enum lorawan_datarate dr)
	Set the default data rate.

enum lorawan_datarate	lorawan_get_min_datarate (void)
	Get the minimum possible datarate.

void	lorawan_get_payload_sizes (uint8_t max_next_payload_size, uint8_t max_payload_size)
	Get the current payload sizes.

int	lorawan_set_region (enum lorawan_region region)
	Set the region and frequency to be used.

Detailed Description

Since: 2.5

Version: 0.1.0

Macro Definition Documentation

◆ LW_RECV_PORT_ANY

#define LW_RECV_PORT_ANY UINT16_MAX

#include <zephyr/lorawan/lorawan.h>

Flag to indicate receiving on any port.

Typedef Documentation

◆ lorawan_battery_level_cb_t

typedef uint8_t(* lorawan_battery_level_cb_t) (void)

#include <zephyr/lorawan/lorawan.h>

Defines the battery level callback handler function signature.

Return values

0	if the node is connected to an external power source
1..254	battery level, where 1 is the minimum and 254 is the maximum value
255	if the node was not able to measure the battery level

◆ lorawan_dr_changed_cb_t

typedef void(* lorawan_dr_changed_cb_t) (enum lorawan_datarate dr)

#include <zephyr/lorawan/lorawan.h>

Defines the datarate changed callback handler function signature.

Parameters

dr	Updated datarate.

Enumeration Type Documentation

◆ lorawan_act_type

enum lorawan_act_type

#include <zephyr/lorawan/lorawan.h>

LoRaWAN activation types.

Enumerator
LORAWAN_ACT_OTAA	Over-the-Air Activation (OTAA)
LORAWAN_ACT_ABP	Activation by Personalization (ABP)

◆ lorawan_channels_mask_size

enum lorawan_channels_mask_size

#include <zephyr/lorawan/lorawan.h>

LoRaWAN channels mask sizes.

Enumerator
LORAWAN_CHANNELS_MASK_SIZE_AS923	Region AS923 mask size.
LORAWAN_CHANNELS_MASK_SIZE_AU915	Region AU915 mask size.
LORAWAN_CHANNELS_MASK_SIZE_CN470	Region CN470 mask size.
LORAWAN_CHANNELS_MASK_SIZE_CN779	Region CN779 mask size.
LORAWAN_CHANNELS_MASK_SIZE_EU433	Region EU433 mask size.
LORAWAN_CHANNELS_MASK_SIZE_EU868	Region EU868 mask size.
LORAWAN_CHANNELS_MASK_SIZE_KR920	Region KR920 mask size.
LORAWAN_CHANNELS_MASK_SIZE_IN865	Region IN865 mask size.
LORAWAN_CHANNELS_MASK_SIZE_US915	Region US915 mask size.
LORAWAN_CHANNELS_MASK_SIZE_RU864	Region RU864 mask size.

◆ lorawan_class

enum lorawan_class

#include <zephyr/lorawan/lorawan.h>

LoRaWAN class types.

Enumerator
LORAWAN_CLASS_A	Class A device.
LORAWAN_CLASS_B	Class B device.
LORAWAN_CLASS_C	Class C device.

◆ lorawan_datarate

enum lorawan_datarate

#include <zephyr/lorawan/lorawan.h>

LoRaWAN datarate types.

Enumerator
LORAWAN_DR_0	DR0 data rate.
LORAWAN_DR_1	DR1 data rate.
LORAWAN_DR_2	DR2 data rate.
LORAWAN_DR_3	DR3 data rate.
LORAWAN_DR_4	DR4 data rate.
LORAWAN_DR_5	DR5 data rate.
LORAWAN_DR_6	DR6 data rate.
LORAWAN_DR_7	DR7 data rate.
LORAWAN_DR_8	DR8 data rate.
LORAWAN_DR_9	DR9 data rate.
LORAWAN_DR_10	DR10 data rate.
LORAWAN_DR_11	DR11 data rate.
LORAWAN_DR_12	DR12 data rate.
LORAWAN_DR_13	DR13 data rate.
LORAWAN_DR_14	DR14 data rate.
LORAWAN_DR_15	DR15 data rate.

◆ lorawan_message_type

enum lorawan_message_type

#include <zephyr/lorawan/lorawan.h>

LoRaWAN message types.

Enumerator
LORAWAN_MSG_UNCONFIRMED	Unconfirmed message.
LORAWAN_MSG_CONFIRMED	Confirmed message.

◆ lorawan_region

enum lorawan_region

#include <zephyr/lorawan/lorawan.h>

LoRaWAN region types.

Enumerator
LORAWAN_REGION_AS923	Asia 923 MHz frequency band.
LORAWAN_REGION_AU915	Australia 915 MHz frequency band.
LORAWAN_REGION_CN470	China 470 MHz frequency band.
LORAWAN_REGION_CN779	China 779 MHz frequency band.
LORAWAN_REGION_EU433	Europe 433 MHz frequency band.
LORAWAN_REGION_EU868	Europe 868 MHz frequency band.
LORAWAN_REGION_KR920	South Korea 920 MHz frequency band.
LORAWAN_REGION_IN865	India 865 MHz frequency band.
LORAWAN_REGION_US915	United States 915 MHz frequency band.
LORAWAN_REGION_RU864	Russia 864 MHz frequency band.

Function Documentation

◆ lorawan_enable_adr()

void lorawan_enable_adr ( bool enable )

#include <zephyr/lorawan/lorawan.h>

Enable Adaptive Data Rate (ADR)

Control whether adaptive data rate (ADR) is enabled. When ADR is enabled, the data rate is treated as a default data rate that will be used if the ADR algorithm has not established a data rate. ADR should normally only be enabled for devices with stable RF conditions (i.e., devices in a mostly static location).

Parameters

enable Enable or Disable adaptive data rate.

◆ lorawan_get_min_datarate()

enum lorawan_datarate lorawan_get_min_datarate ( void )

#include <zephyr/lorawan/lorawan.h>

Get the minimum possible datarate.

The minimum possible datarate may change in response to a TxParamSetupReq command from the network server.

Returns: Minimum possible data rate

◆ lorawan_get_payload_sizes()

void lorawan_get_payload_sizes	(	uint8_t *	max_next_payload_size,
		uint8_t *	max_payload_size
	)

#include <zephyr/lorawan/lorawan.h>

Get the current payload sizes.

Query the current payload sizes. The maximum payload size varies with datarate, while the current payload size can be less due to MAC layer commands which are inserted into uplink packets.

Parameters

max_next_payload_size	Maximum payload size for the next transmission
max_payload_size	Maximum payload size for this datarate

◆ lorawan_join()

int lorawan_join ( const struct lorawan_join_config * config )

#include <zephyr/lorawan/lorawan.h>

Join the LoRaWAN network.

Join the LoRaWAN network using OTAA or AWB.

Parameters

config Configuration to be used

Returns: 0 if successful, negative errno code if failure

◆ lorawan_register_battery_level_callback()

void lorawan_register_battery_level_callback ( lorawan_battery_level_cb_t cb )

#include <zephyr/lorawan/lorawan.h>

Register a battery level callback function.

Provide the LoRaWAN stack with a function to be called whenever a battery level needs to be read.

Should no callback be provided the lorawan backend will report 255.

Parameters

cb	Pointer to the battery level function

◆ lorawan_register_downlink_callback()

void lorawan_register_downlink_callback ( struct lorawan_downlink_cb * cb )

#include <zephyr/lorawan/lorawan.h>

Register a callback to be run on downlink packets.

Parameters

cb	Pointer to structure containing callback parameters

◆ lorawan_register_dr_changed_callback()

void lorawan_register_dr_changed_callback ( lorawan_dr_changed_cb_t cb )

#include <zephyr/lorawan/lorawan.h>

Register a callback to be called when the datarate changes.

The callback is called once upon successfully joining a network and again each time the datarate changes due to ADR.

Parameters

cb	Pointer to datarate update callback

◆ lorawan_send()

int lorawan_send	(	uint8_t	port,
		uint8_t *	data,
		uint8_t	len,
		enum lorawan_message_type	type
	)

#include <zephyr/lorawan/lorawan.h>

Send data to the LoRaWAN network.

Send data to the connected LoRaWAN network.

Parameters

port	Port to be used for sending data. Must be set if the payload is not empty.
data	Data buffer to be sent
len	Length of the buffer to be sent. Maximum length of this buffer is 255 bytes but the actual payload size varies with region and datarate.
type	Specifies if the message shall be confirmed or unconfirmed. Must be one of lorawan_message_type.

Returns: 0 if successful, negative errno code if failure

◆ lorawan_set_channels_mask()

int lorawan_set_channels_mask	(	uint16_t *	channels_mask,
		size_t	channels_mask_size
	)

#include <zephyr/lorawan/lorawan.h>

Set the channels mask.

Change the default channels mask. When mask is not changed, all the channels can be used for data transmission. Some Network Servers don't use all the channels, in this case, the channels mask must be provided.

Parameters

channels_mask	Buffer with channels mask to be used.
channels_mask_size	Size of channels mask buffer.

Return values

0	successful
-EINVAL	channels mask or channels mask size is wrong

◆ lorawan_set_class()

int lorawan_set_class ( enum lorawan_class dev_class )

#include <zephyr/lorawan/lorawan.h>

Set the current device class.

Change the current device class. This function may be called before or after a network connection has been established.

Parameters

dev_class New device class

Returns: 0 if successful, negative errno code if failure

◆ lorawan_set_conf_msg_tries()

int lorawan_set_conf_msg_tries ( uint8_t tries )

#include <zephyr/lorawan/lorawan.h>

Set the number of tries used for transmissions.

Parameters

tries Number of tries to be used

Returns: 0 if successful, negative errno code if failure

◆ lorawan_set_datarate()

int lorawan_set_datarate ( enum lorawan_datarate dr )

#include <zephyr/lorawan/lorawan.h>

Set the default data rate.

Change the default data rate.

Parameters

dr	Data rate used for transmissions

Returns: 0 if successful, negative errno code if failure

◆ lorawan_set_region()

int lorawan_set_region ( enum lorawan_region region )

#include <zephyr/lorawan/lorawan.h>

Set the region and frequency to be used.

Control the LoRa region and frequency settings. This should be called before lorawan_start(). If you only have support for a single region selected via Kconfig, this function does not need to be called at all.

Parameters

region The region to be selected

Returns: 0 if successful, negative errno otherwise

◆ lorawan_start()

int lorawan_start ( void )

#include <zephyr/lorawan/lorawan.h>

Start the LoRaWAN stack.

This function need to be called before joining the network.

Returns: 0 if successful, negative errno code if failure

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ LW_RECV_PORT_ANY

Typedef Documentation

◆ lorawan_battery_level_cb_t

◆ lorawan_dr_changed_cb_t

Enumeration Type Documentation

◆ lorawan_act_type

◆ lorawan_channels_mask_size

◆ lorawan_class

◆ lorawan_datarate

◆ lorawan_message_type

◆ lorawan_region

Function Documentation

◆ lorawan_enable_adr()

◆ lorawan_get_min_datarate()

◆ lorawan_get_payload_sizes()

◆ lorawan_join()

◆ lorawan_register_battery_level_callback()

◆ lorawan_register_downlink_callback()

◆ lorawan_register_dr_changed_callback()

◆ lorawan_send()

◆ lorawan_set_channels_mask()

◆ lorawan_set_class()

◆ lorawan_set_conf_msg_tries()

◆ lorawan_set_datarate()

◆ lorawan_set_region()

◆ lorawan_start()