Zephyr API Documentation
3.7.0
A Scalable Open Source RTOS
|
BSD Sockets compatible API definitions. More...
#include <zephyr/kernel.h>
#include <sys/types.h>
#include <zephyr/types.h>
#include <zephyr/device.h>
#include <zephyr/net/net_ip.h>
#include <zephyr/net/socket_select.h>
#include <zephyr/net/socket_poll.h>
#include <zephyr/sys/iterable_sections.h>
#include <zephyr/sys/fdtable.h>
#include <zephyr/net/dns_resolve.h>
#include <stdlib.h>
#include <zephyr/syscalls/socket.h>
Go to the source code of this file.
Data Structures | |
struct | zsock_addrinfo |
Definition used when querying address information. More... | |
struct | ifreq |
Interface description structure. More... | |
struct | in_pktinfo |
Incoming IPv4 packet information. More... | |
struct | ip_mreqn |
Struct used when joining or leaving a IPv4 multicast group. More... | |
struct | ipv6_mreq |
Struct used when joining or leaving a IPv6 multicast group. More... | |
struct | in6_pktinfo |
Incoming IPv6 packet information. More... | |
Macros | |
Options for poll() | |
#define | ZSOCK_POLLIN 1 |
zsock_poll: Poll for readability | |
#define | ZSOCK_POLLPRI 2 |
zsock_poll: Poll for exceptional condition | |
#define | ZSOCK_POLLOUT 4 |
zsock_poll: Poll for writability | |
#define | ZSOCK_POLLERR 8 |
zsock_poll: Poll results in error condition (output value only) | |
#define | ZSOCK_POLLHUP 0x10 |
zsock_poll: Poll detected closed connection (output value only) | |
#define | ZSOCK_POLLNVAL 0x20 |
zsock_poll: Invalid socket (output value only) | |
Options for sending and receiving data | |
#define | ZSOCK_MSG_PEEK 0x02 |
zsock_recv: Read data without removing it from socket input queue | |
#define | ZSOCK_MSG_CTRUNC 0x08 |
zsock_recvmsg: Control data buffer too small. | |
#define | ZSOCK_MSG_TRUNC 0x20 |
zsock_recv: return the real length of the datagram, even when it was longer than the passed buffer | |
#define | ZSOCK_MSG_DONTWAIT 0x40 |
zsock_recv/zsock_send: Override operation to non-blocking | |
#define | ZSOCK_MSG_WAITALL 0x100 |
zsock_recv: block until the full amount of data can be returned | |
Options for shutdown() function | |
#define | ZSOCK_SHUT_RD 0 |
zsock_shutdown: Shut down for reading | |
#define | ZSOCK_SHUT_WR 1 |
zsock_shutdown: Shut down for writing | |
#define | ZSOCK_SHUT_RDWR 2 |
zsock_shutdown: Shut down for both reading and writing | |
Socket options for TLS | |
#define | SOL_TLS 282 |
Protocol level for TLS. | |
#define | TLS_SEC_TAG_LIST 1 |
Socket option to select TLS credentials to use. | |
#define | TLS_HOSTNAME 2 |
Write-only socket option to set hostname. | |
#define | TLS_CIPHERSUITE_LIST 3 |
Socket option to select ciphersuites to use. | |
#define | TLS_CIPHERSUITE_USED 4 |
Read-only socket option to read a ciphersuite chosen during TLS handshake. | |
#define | TLS_PEER_VERIFY 5 |
Write-only socket option to set peer verification level for TLS connection. | |
#define | TLS_DTLS_ROLE 6 |
Write-only socket option to set role for DTLS connection. | |
#define | TLS_ALPN_LIST 7 |
Socket option for setting the supported Application Layer Protocols. | |
#define | TLS_DTLS_HANDSHAKE_TIMEOUT_MIN 8 |
Socket option to set DTLS min handshake timeout. | |
#define | TLS_DTLS_HANDSHAKE_TIMEOUT_MAX 9 |
Socket option to set DTLS max handshake timeout. | |
#define | TLS_CERT_NOCOPY 10 |
Socket option for preventing certificates from being copied to the mbedTLS heap if possible. | |
#define | TLS_NATIVE 11 |
TLS socket option to use with offloading. | |
#define | TLS_SESSION_CACHE 12 |
Socket option to control TLS session caching on a socket. | |
#define | TLS_SESSION_CACHE_PURGE 13 |
Write-only socket option to purge session cache immediately. | |
#define | TLS_DTLS_CID 14 |
Write-only socket option to control DTLS CID. | |
#define | TLS_DTLS_CID_STATUS 15 |
Read-only socket option to get DTLS CID status. | |
#define | TLS_DTLS_CID_VALUE 16 |
Socket option to set or get the value of the DTLS connection ID to be used for the DTLS session. | |
#define | TLS_DTLS_PEER_CID_VALUE 17 |
Read-only socket option to get the value of the DTLS connection ID received from the peer. | |
#define | TLS_DTLS_HANDSHAKE_ON_CONNECT 18 |
Socket option to configure DTLS socket behavior on connect(). | |
#define | TLS_PEER_VERIFY_NONE 0 |
Peer verification disabled. | |
#define | TLS_PEER_VERIFY_OPTIONAL 1 |
Peer verification optional. | |
#define | TLS_PEER_VERIFY_REQUIRED 2 |
Peer verification required. | |
#define | TLS_DTLS_ROLE_CLIENT 0 |
Client role in a DTLS session. | |
#define | TLS_DTLS_ROLE_SERVER 1 |
Server role in a DTLS session. | |
#define | TLS_CERT_NOCOPY_NONE 0 |
Cert duplicated in heap. | |
#define | TLS_CERT_NOCOPY_OPTIONAL 1 |
Cert not copied in heap if DER. | |
#define | TLS_SESSION_CACHE_DISABLED 0 |
Disable TLS session caching. | |
#define | TLS_SESSION_CACHE_ENABLED 1 |
Enable TLS session caching. | |
#define | TLS_DTLS_CID_DISABLED 0 |
CID is disabled | |
#define | TLS_DTLS_CID_SUPPORTED 1 |
CID is supported. | |
#define | TLS_DTLS_CID_ENABLED 2 |
CID is enabled | |
#define | TLS_DTLS_CID_STATUS_DISABLED 0 |
CID is disabled. | |
#define | TLS_DTLS_CID_STATUS_DOWNLINK 1 |
CID is in use by us. | |
#define | TLS_DTLS_CID_STATUS_UPLINK 2 |
CID is in use by peer. | |
#define | TLS_DTLS_CID_STATUS_BIDIRECTIONAL 3 |
CID is in use by us and peer. | |
Flags for getaddrinfo() hints | |
#define | AI_PASSIVE 0x1 |
Address for bind() (vs for connect()) | |
#define | AI_CANONNAME 0x2 |
Fill in ai_canonname. | |
#define | AI_NUMERICHOST 0x4 |
Assume host address is in numeric notation, don't DNS lookup. | |
#define | AI_V4MAPPED 0x8 |
May return IPv4 mapped address for IPv6 | |
#define | AI_ALL 0x10 |
May return both native IPv6 and mapped IPv4 address for IPv6. | |
#define | AI_ADDRCONFIG 0x20 |
IPv4/IPv6 support depends on local system config. | |
#define | AI_NUMERICSERV 0x400 |
Assume service (port) is numeric. | |
#define | AI_EXTFLAGS 0x800 |
Extra flags present (see RFC 5014) | |
Flags for getnameinfo() | |
#define | NI_NUMERICHOST 1 |
zsock_getnameinfo(): Resolve to numeric address. | |
#define | NI_NUMERICSERV 2 |
zsock_getnameinfo(): Resolve to numeric port number. | |
#define | NI_NOFQDN 4 |
zsock_getnameinfo(): Return only hostname instead of FQDN | |
#define | NI_NAMEREQD 8 |
zsock_getnameinfo(): Dummy option for compatibility | |
#define | NI_DGRAM 16 |
zsock_getnameinfo(): Dummy option for compatibility | |
#define | NI_MAXHOST 64 |
zsock_getnameinfo(): Max supported hostname length | |
Network interface name description | |
#define | IFNAMSIZ Z_DEVICE_MAX_NAME_LEN |
Network interface name length. | |
Socket level options (SOL_SOCKET) | |
#define | SOL_SOCKET 1 |
Socket-level option. | |
#define | SO_DEBUG 1 |
Recording debugging information (ignored, for compatibility) | |
#define | SO_REUSEADDR 2 |
address reuse | |
#define | SO_TYPE 3 |
Type of the socket. | |
#define | SO_ERROR 4 |
Async error. | |
#define | SO_DONTROUTE 5 |
Bypass normal routing and send directly to host (ignored, for compatibility) | |
#define | SO_BROADCAST 6 |
Transmission of broadcast messages is supported (ignored, for compatibility) | |
#define | SO_SNDBUF 7 |
Size of socket send buffer. | |
#define | SO_RCVBUF 8 |
Size of socket recv buffer. | |
#define | SO_KEEPALIVE 9 |
Enable sending keep-alive messages on connections. | |
#define | SO_OOBINLINE 10 |
Place out-of-band data into receive stream (ignored, for compatibility) | |
#define | SO_PRIORITY 12 |
Socket priority. | |
#define | SO_LINGER 13 |
Socket lingers on close (ignored, for compatibility) | |
#define | SO_REUSEPORT 15 |
Allow multiple sockets to reuse a single port. | |
#define | SO_RCVLOWAT 18 |
Receive low watermark (ignored, for compatibility) | |
#define | SO_SNDLOWAT 19 |
Send low watermark (ignored, for compatibility) | |
#define | SO_RCVTIMEO 20 |
Receive timeout Applies to receive functions like recv(), but not to connect() | |
#define | SO_SNDTIMEO 21 |
Send timeout. | |
#define | SO_BINDTODEVICE 25 |
Bind a socket to an interface. | |
#define | SO_ACCEPTCONN 30 |
Socket accepts incoming connections (ignored, for compatibility) | |
#define | SO_TIMESTAMPING 37 |
Timestamp TX RX or both packets. | |
#define | SO_PROTOCOL 38 |
Protocol used with the socket. | |
#define | SO_DOMAIN 39 |
Domain used with SOCKET. | |
#define | SO_SOCKS5 60 |
Enable SOCKS5 for Socket. | |
#define | SO_TXTIME 61 |
Socket TX time (when the data should be sent) | |
#define | SCM_TXTIME SO_TXTIME |
Socket TX time (same as SO_TXTIME) | |
#define | SOF_TIMESTAMPING_RX_HARDWARE BIT(0) |
Timestamp generation flags. | |
#define | SOF_TIMESTAMPING_TX_HARDWARE BIT(1) |
Request TX timestamps generated by network adapter. | |
TCP level options (IPPROTO_TCP) | |
#define | TCP_NODELAY 1 |
Disable TCP buffering (ignored, for compatibility) | |
#define | TCP_KEEPIDLE 2 |
Start keepalives after this period (seconds) | |
#define | TCP_KEEPINTVL 3 |
Interval between keepalives (seconds) | |
#define | TCP_KEEPCNT 4 |
Number of keepalives before dropping connection. | |
IPv4 level options (IPPROTO_IP) | |
#define | IP_TOS 1 |
Set or receive the Type-Of-Service value for an outgoing packet. | |
#define | IP_TTL 2 |
Set or receive the Time-To-Live value for an outgoing packet. | |
#define | IP_PKTINFO 8 |
Pass an IP_PKTINFO ancillary message that contains a pktinfo structure that supplies some information about the incoming packet. | |
#define | IP_MULTICAST_TTL 33 |
Set IPv4 multicast TTL value. | |
#define | IP_ADD_MEMBERSHIP 35 |
Join IPv4 multicast group. | |
#define | IP_DROP_MEMBERSHIP 36 |
Leave IPv4 multicast group. | |
IPv6 level options (IPPROTO_IPV6) | |
#define | IPV6_UNICAST_HOPS 16 |
Set the unicast hop limit for the socket. | |
#define | IPV6_MULTICAST_HOPS 18 |
Set the multicast hop limit for the socket. | |
#define | IPV6_ADD_MEMBERSHIP 20 |
Join IPv6 multicast group. | |
#define | IPV6_DROP_MEMBERSHIP 21 |
Leave IPv6 multicast group. | |
#define | IPV6_V6ONLY 26 |
Don't support IPv4 access. | |
#define | IPV6_RECVPKTINFO 49 |
Pass an IPV6_RECVPKTINFO ancillary message that contains a in6_pktinfo structure that supplies some information about the incoming packet. | |
#define | IPV6_ADDR_PREFERENCES 72 |
RFC5014: Source address selection. | |
#define | IPV6_PREFER_SRC_TMP 0x0001 |
Prefer temporary address as source. | |
#define | IPV6_PREFER_SRC_PUBLIC 0x0002 |
Prefer public address as source. | |
#define | IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100 |
Either public or temporary address is selected as a default source depending on the output interface configuration (this is the default value). | |
#define | IPV6_PREFER_SRC_COA 0x0004 |
Prefer Care-of address as source. | |
#define | IPV6_PREFER_SRC_HOME 0x0400 |
Prefer Home address as source. | |
#define | IPV6_PREFER_SRC_CGA 0x0008 |
Prefer CGA (Cryptographically Generated Address) address as source. | |
#define | IPV6_PREFER_SRC_NONCGA 0x0800 |
Prefer non-CGA address as source. | |
#define | IPV6_TCLASS 67 |
Set or receive the traffic class value for an outgoing packet. | |
Backlog size for listen() | |
#define | SOMAXCONN 128 |
listen: The maximum backlog queue length | |
Functions | |
void * | zsock_get_context_object (int sock) |
Obtain a file descriptor's associated net context. | |
int | zsock_socket (int family, int type, int proto) |
Create a network socket. | |
int | zsock_socketpair (int family, int type, int proto, int *sv) |
Create an unnamed pair of connected sockets. | |
int | zsock_close (int sock) |
Close a network socket. | |
int | zsock_shutdown (int sock, int how) |
Shutdown socket send/receive operations. | |
int | zsock_bind (int sock, const struct sockaddr *addr, socklen_t addrlen) |
Bind a socket to a local network address. | |
int | zsock_connect (int sock, const struct sockaddr *addr, socklen_t addrlen) |
Connect a socket to a peer network address. | |
int | zsock_listen (int sock, int backlog) |
Set up a STREAM socket to accept peer connections. | |
int | zsock_accept (int sock, struct sockaddr *addr, socklen_t *addrlen) |
Accept a connection on listening socket. | |
ssize_t | zsock_sendto (int sock, const void *buf, size_t len, int flags, const struct sockaddr *dest_addr, socklen_t addrlen) |
Send data to an arbitrary network address. | |
static ssize_t | zsock_send (int sock, const void *buf, size_t len, int flags) |
Send data to a connected peer. | |
ssize_t | zsock_sendmsg (int sock, const struct msghdr *msg, int flags) |
Send data to an arbitrary network address. | |
ssize_t | zsock_recvfrom (int sock, void *buf, size_t max_len, int flags, struct sockaddr *src_addr, socklen_t *addrlen) |
Receive data from an arbitrary network address. | |
ssize_t | zsock_recvmsg (int sock, struct msghdr *msg, int flags) |
Receive a message from an arbitrary network address. | |
static ssize_t | zsock_recv (int sock, void *buf, size_t max_len, int flags) |
Receive data from a connected peer. | |
int | zsock_fcntl_impl (int sock, int cmd, int flags) |
Control blocking/non-blocking mode of a socket. | |
int | zsock_ioctl_impl (int sock, unsigned long request, va_list ap) |
Control underlying socket parameters. | |
int | zsock_poll (struct zsock_pollfd *fds, int nfds, int timeout) |
Efficiently poll multiple sockets for events. | |
int | zsock_getsockopt (int sock, int level, int optname, void *optval, socklen_t *optlen) |
Get various socket options. | |
int | zsock_setsockopt (int sock, int level, int optname, const void *optval, socklen_t optlen) |
Set various socket options. | |
int | zsock_getpeername (int sock, struct sockaddr *addr, socklen_t *addrlen) |
Get peer name. | |
int | zsock_getsockname (int sock, struct sockaddr *addr, socklen_t *addrlen) |
Get socket name. | |
int | zsock_gethostname (char *buf, size_t len) |
Get local host name. | |
static char * | zsock_inet_ntop (sa_family_t family, const void *src, char *dst, size_t size) |
Convert network address from internal to numeric ASCII form. | |
int | zsock_inet_pton (sa_family_t family, const char *src, void *dst) |
Convert network address from numeric ASCII form to internal representation. | |
int | zsock_getaddrinfo (const char *host, const char *service, const struct zsock_addrinfo *hints, struct zsock_addrinfo **res) |
Resolve a domain name to one or more network addresses. | |
void | zsock_freeaddrinfo (struct zsock_addrinfo *ai) |
Free results returned by zsock_getaddrinfo() | |
const char * | zsock_gai_strerror (int errcode) |
Convert zsock_getaddrinfo() error code to textual message. | |
int | zsock_getnameinfo (const struct sockaddr *addr, socklen_t addrlen, char *host, socklen_t hostlen, char *serv, socklen_t servlen, int flags) |
Resolve a network address to a domain name or ASCII address. | |
Socket APIs available if CONFIG_NET_SOCKETS_POSIX_NAMES is enabled | |
#define | pollfd zsock_pollfd |
POSIX wrapper for zsock_pollfd. | |
#define | addrinfo zsock_addrinfo |
POSIX wrapper for zsock_addrinfo. | |
#define | POLLIN ZSOCK_POLLIN |
POSIX wrapper for ZSOCK_POLLIN. | |
#define | POLLOUT ZSOCK_POLLOUT |
POSIX wrapper for ZSOCK_POLLOUT. | |
#define | POLLERR ZSOCK_POLLERR |
POSIX wrapper for ZSOCK_POLLERR. | |
#define | POLLHUP ZSOCK_POLLHUP |
POSIX wrapper for ZSOCK_POLLHUP. | |
#define | POLLNVAL ZSOCK_POLLNVAL |
POSIX wrapper for ZSOCK_POLLNVAL. | |
#define | MSG_PEEK ZSOCK_MSG_PEEK |
POSIX wrapper for ZSOCK_MSG_PEEK. | |
#define | MSG_CTRUNC ZSOCK_MSG_CTRUNC |
POSIX wrapper for ZSOCK_MSG_CTRUNC. | |
#define | MSG_TRUNC ZSOCK_MSG_TRUNC |
POSIX wrapper for ZSOCK_MSG_TRUNC. | |
#define | MSG_DONTWAIT ZSOCK_MSG_DONTWAIT |
POSIX wrapper for ZSOCK_MSG_DONTWAIT. | |
#define | MSG_WAITALL ZSOCK_MSG_WAITALL |
POSIX wrapper for ZSOCK_MSG_WAITALL. | |
#define | SHUT_RD ZSOCK_SHUT_RD |
POSIX wrapper for ZSOCK_SHUT_RD. | |
#define | SHUT_WR ZSOCK_SHUT_WR |
POSIX wrapper for ZSOCK_SHUT_WR. | |
#define | SHUT_RDWR ZSOCK_SHUT_RDWR |
POSIX wrapper for ZSOCK_SHUT_RDWR. | |
#define | EAI_BADFLAGS DNS_EAI_BADFLAGS |
POSIX wrapper for DNS_EAI_BADFLAGS. | |
#define | EAI_NONAME DNS_EAI_NONAME |
POSIX wrapper for DNS_EAI_NONAME. | |
#define | EAI_AGAIN DNS_EAI_AGAIN |
POSIX wrapper for DNS_EAI_AGAIN. | |
#define | EAI_FAIL DNS_EAI_FAIL |
POSIX wrapper for DNS_EAI_FAIL. | |
#define | EAI_NODATA DNS_EAI_NODATA |
POSIX wrapper for DNS_EAI_NODATA. | |
#define | EAI_MEMORY DNS_EAI_MEMORY |
POSIX wrapper for DNS_EAI_MEMORY. | |
#define | EAI_SYSTEM DNS_EAI_SYSTEM |
POSIX wrapper for DNS_EAI_SYSTEM. | |
#define | EAI_SERVICE DNS_EAI_SERVICE |
POSIX wrapper for DNS_EAI_SERVICE. | |
#define | EAI_SOCKTYPE DNS_EAI_SOCKTYPE |
POSIX wrapper for DNS_EAI_SOCKTYPE. | |
#define | EAI_FAMILY DNS_EAI_FAMILY |
POSIX wrapper for DNS_EAI_FAMILY. | |
static int | socket (int family, int type, int proto) |
POSIX wrapper for zsock_socket. | |
static int | socketpair (int family, int type, int proto, int sv[2]) |
POSIX wrapper for zsock_socketpair. | |
static int | close (int sock) |
POSIX wrapper for zsock_close. | |
static int | shutdown (int sock, int how) |
POSIX wrapper for zsock_shutdown. | |
static int | bind (int sock, const struct sockaddr *addr, socklen_t addrlen) |
POSIX wrapper for zsock_bind. | |
static int | connect (int sock, const struct sockaddr *addr, socklen_t addrlen) |
POSIX wrapper for zsock_connect. | |
static int | listen (int sock, int backlog) |
POSIX wrapper for zsock_listen. | |
static int | accept (int sock, struct sockaddr *addr, socklen_t *addrlen) |
POSIX wrapper for zsock_accept. | |
static ssize_t | send (int sock, const void *buf, size_t len, int flags) |
POSIX wrapper for zsock_send. | |
static ssize_t | recv (int sock, void *buf, size_t max_len, int flags) |
POSIX wrapper for zsock_recv. | |
static ssize_t | sendto (int sock, const void *buf, size_t len, int flags, const struct sockaddr *dest_addr, socklen_t addrlen) |
POSIX wrapper for zsock_sendto. | |
static ssize_t | sendmsg (int sock, const struct msghdr *message, int flags) |
POSIX wrapper for zsock_sendmsg. | |
static ssize_t | recvfrom (int sock, void *buf, size_t max_len, int flags, struct sockaddr *src_addr, socklen_t *addrlen) |
POSIX wrapper for zsock_recvfrom. | |
static ssize_t | recvmsg (int sock, struct msghdr *msg, int flags) |
POSIX wrapper for zsock_recvmsg. | |
static int | poll (struct zsock_pollfd *fds, int nfds, int timeout) |
POSIX wrapper for zsock_poll. | |
static int | getsockopt (int sock, int level, int optname, void *optval, socklen_t *optlen) |
POSIX wrapper for zsock_getsockopt. | |
static int | setsockopt (int sock, int level, int optname, const void *optval, socklen_t optlen) |
POSIX wrapper for zsock_setsockopt. | |
static int | getpeername (int sock, struct sockaddr *addr, socklen_t *addrlen) |
POSIX wrapper for zsock_getpeername. | |
static int | getsockname (int sock, struct sockaddr *addr, socklen_t *addrlen) |
POSIX wrapper for zsock_getsockname. | |
static int | getaddrinfo (const char *host, const char *service, const struct zsock_addrinfo *hints, struct zsock_addrinfo **res) |
POSIX wrapper for zsock_getaddrinfo. | |
static void | freeaddrinfo (struct zsock_addrinfo *ai) |
POSIX wrapper for zsock_freeaddrinfo. | |
static const char * | gai_strerror (int errcode) |
POSIX wrapper for zsock_gai_strerror. | |
static int | getnameinfo (const struct sockaddr *addr, socklen_t addrlen, char *host, socklen_t hostlen, char *serv, socklen_t servlen, int flags) |
POSIX wrapper for zsock_getnameinfo. | |
static int | gethostname (char *buf, size_t len) |
POSIX wrapper for zsock_gethostname. | |
static int | inet_pton (sa_family_t family, const char *src, void *dst) |
POSIX wrapper for zsock_inet_pton. | |
static char * | inet_ntop (sa_family_t family, const void *src, char *dst, size_t size) |
POSIX wrapper for zsock_inet_ntop. | |
BSD Sockets compatible API definitions.
An API for applications to use BSD Sockets like API.