spi_config Struct Reference

SPI controller configuration structure. More...

#include <spi.h>

Data Fields
uint32_t	frequency
	Bus frequency in Hertz.
spi_operation_t	operation
	Operation flags.
uint16_t	slave
	Slave number from 0 to host controller slave limit.
struct spi_cs_control	cs
	GPIO chip-select line (optional, must be initialized to zero if not used).

Detailed Description

SPI controller configuration structure.

Field Documentation

cs

struct spi_cs_control spi_config::cs

GPIO chip-select line (optional, must be initialized to zero if not used).

frequency

uint32_t spi_config::frequency

Bus frequency in Hertz.

operation

spi_operation_t spi_config::operation

Operation flags.

It is a bit field with the following parts:

• 0: Master or slave.
• 1..3: Polarity, phase and loop mode.
• 4: LSB or MSB first.
• 5..10: Size of a data frame in bits.
• 11: Full/half duplex.
• 12: Hold on the CS line if possible.
• 13: Keep resource locked for the caller.
• 14: Active high CS logic.
• 15: Motorola or TI frame format (optional).

If CONFIG_SPI_EXTENDED_MODES is enabled:

• 16..17: MISO lines (Single/Dual/Quad/Octal).
• 18..31: Reserved for future use.

slave

uint16_t spi_config::slave

Slave number from 0 to host controller slave limit.

---

The documentation for this struct was generated from the following file:

• zephyr/drivers/spi.h