Bluetooth: HCI IPC
Overview
This sample exposes Bluetooth Controller support to another device or CPU using IPC subsystem.
Requirements
A board with IPC subsystem and Bluetooth LE support
Building and Running
This sample can be found under samples/bluetooth/hci_ipc in the Zephyr tree.
To use this application, you need a board with a Bluetooth controller and IPC support. You can then build this application and flash it onto your board in the usual way. See Supported Boards for board-specific building and programming information.
To test this sample, you need a separate device/CPU that acts as Bluetooth
HCI IPC peer.
This sample is compatible with the HCI IPC driver provided by
Zephyr’s Bluetooth HCI Drivers core. See the
CONFIG_BT_HCI_IPC configuration option for more information.
You might need to adjust the Kconfig configuration of this sample to make it
compatible with the peer application. For example, CONFIG_BT_MAX_CONN
must be equal to the maximum number of connections supported by the peer application.
Refer to Bluetooth samples for general information about Bluetooth samples.