BBC micro:bit line-follower robot
Overview
This sample controls a stand-alone line-following DFRobot Maqueen robot chassis containing a BBC micro:bit board.
Requirements
To build and run this sample you’ll need a DFRobot Maqueen robot chassis (ROB0148) with a BBC micro:bit board. Use black tape to create a line track for the robot to follow. Build and flash the program to the BBC micro:bit board (described below), turn on the robot, and put it on the black line track.
Building and running
Build and flash this sample project using these commands:
west build -b bbc_microbit samples/boards/bbc_microbit/line_follower_robot
west flash
Sample Output
The sample program controls the robot to follow a line track and does not write to the console. You can watch this robot video to see it in action.