Intel Agilex SoC Development Kit
Overview
The Intel Agilex SoC Development Kit offers a complete design environment that includes both hardware and software for developing Intel Agilex F-Series FPGA designs. This kit is recommended for developing custom Arm* processor-based SoC designs and evaluating transceiver performance.
Hardware
The Intel Agilex SoC Development Kit supports the following physical features:
Intel Agilex F-Series FPGA, 1400 KLE, 2486A package integrate the quad-core Arm Cortex-A53 processor
On-board 8 GB DDR4 memory
On-board JTAG Intel FPGA Download Cable II
QSPI flash daughtercard
HPS OOBE daughtercard with UART and SD Card support
Supported Features
The Intel Agilex SoC Development Kit configuration supports the following hardware features:
Interface |
Controller |
Driver/Component |
|---|---|---|
GIC-400 |
on-chip |
GICv2 interrupt controller |
ARM TIMER |
on-chip |
System Clock |
UART |
on-chip |
NS16550 compatible serial port |
Other hardware features have not been enabled yet for this board.
The default configuration can be found in boards/intel/socfpga/agilex_socdk/intel_socfpga_agilex_socdk_defconfig
Programming and Debugging
Boot Flow
Zephyr image will need to be loaded by Intel Arm Trusted Firmware (ATF). ATF BL2 is first stage boot loader (FSBL) and ATF BL31 is second stage boot loader (SSBL).
Zephyr boot flow:
ATF BL2 (EL3) -> ATF BL31 (EL3) -> Zephyr (EL2->EL1)
Intel Arm Trusted Firmware (ATF) can be downloaded from github:
Flashing
Zephyr image can be loaded in DDR memory at address 0x10000000 from SD Card or QSPI Flash in ATF BL2.
Debugging
The Intel Agilex SoC Development Kit includes one JTAG connector on board, connect it to Intel USB blaster download cables for debugging.
Zephyr applications running on the Cortex-A53 core can be tested by observing UART console output.