Configuration Client Model . More...

Data Structures
struct	bt_mesh_cfg_cli_cb
	Mesh Configuration Client Status messages callback. More...

struct	bt_mesh_cfg_cli
	Mesh Configuration Client Model Context. More...

struct	bt_mesh_cfg_cli_mod_pub
	Model publication configuration parameters. More...

struct	bt_mesh_cfg_cli_hb_sub
	Heartbeat subscription configuration parameters. More...

struct	bt_mesh_cfg_cli_hb_pub
	Heartbeat publication configuration parameters. More...

struct	bt_mesh_comp_p0
	Parsed Composition data page 0 representation. More...

struct	bt_mesh_comp_p0_elem
	Composition data page 0 element representation. More...

struct	bt_mesh_comp_p1_elem
	Composition data page 1 element representation. More...

struct	bt_mesh_comp_p1_model_item
	Composition data page 1 model item representation. More...

struct	bt_mesh_comp_p1_item_short
	Extended Model Item in short representation. More...

struct	bt_mesh_comp_p1_item_long
	Extended Model Item in long representation. More...

struct	bt_mesh_comp_p1_ext_item
	Extended Model Item. More...

struct	bt_mesh_comp_p2_record
	Composition data page 2 record parsing structure. More...

Macros
#define	BT_MESH_MODEL_CFG_CLI(cli_data)
	Generic Configuration Client model composition data entry.

#define	BT_MESH_PUB_PERIOD_100MS(steps)
	Helper macro to encode model publication period in units of 100ms.

#define	BT_MESH_PUB_PERIOD_SEC(steps)
	Helper macro to encode model publication period in units of 1 second.

#define	BT_MESH_PUB_PERIOD_10SEC(steps)
	Helper macro to encode model publication period in units of 10 seconds.

#define	BT_MESH_PUB_PERIOD_10MIN(steps)
	Helper macro to encode model publication period in units of 10 minutes.

Functions
int	bt_mesh_cfg_cli_node_reset (uint16_t net_idx, uint16_t addr, bool *status)
	Reset the target node and remove it from the network.

int	bt_mesh_cfg_cli_comp_data_get (uint16_t net_idx, uint16_t addr, uint8_t page, uint8_t rsp, struct net_buf_simple comp)
	Get the target node's composition data.

int	bt_mesh_cfg_cli_beacon_get (uint16_t net_idx, uint16_t addr, uint8_t *status)
	Get the target node's network beacon state.

int	bt_mesh_cfg_cli_krp_get (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t status, uint8_t phase)
	Get the target node's network key refresh phase state.

int	bt_mesh_cfg_cli_krp_set (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t transition, uint8_t status, uint8_t phase)
	Set the target node's network key refresh phase parameters.

int	bt_mesh_cfg_cli_beacon_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *status)
	Set the target node's network beacon state.

int	bt_mesh_cfg_cli_ttl_get (uint16_t net_idx, uint16_t addr, uint8_t *ttl)
	Get the target node's Time To Live value.

int	bt_mesh_cfg_cli_ttl_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *ttl)
	Set the target node's Time To Live value.

int	bt_mesh_cfg_cli_friend_get (uint16_t net_idx, uint16_t addr, uint8_t *status)
	Get the target node's Friend feature status.

int	bt_mesh_cfg_cli_friend_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *status)
	Set the target node's Friend feature state.

int	bt_mesh_cfg_cli_gatt_proxy_get (uint16_t net_idx, uint16_t addr, uint8_t *status)
	Get the target node's Proxy feature state.

int	bt_mesh_cfg_cli_gatt_proxy_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *status)
	Set the target node's Proxy feature state.

int	bt_mesh_cfg_cli_net_transmit_get (uint16_t net_idx, uint16_t addr, uint8_t *transmit)
	Get the target node's network_transmit state.

int	bt_mesh_cfg_cli_net_transmit_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *transmit)
	Set the target node's network transmit parameters.

int	bt_mesh_cfg_cli_relay_get (uint16_t net_idx, uint16_t addr, uint8_t status, uint8_t transmit)
	Get the target node's Relay feature state.

int	bt_mesh_cfg_cli_relay_set (uint16_t net_idx, uint16_t addr, uint8_t new_relay, uint8_t new_transmit, uint8_t status, uint8_t transmit)
	Set the target node's Relay parameters.

int	bt_mesh_cfg_cli_net_key_add (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, const uint8_t net_key[16], uint8_t *status)
	Add a network key to the target node.

int	bt_mesh_cfg_cli_net_key_get (uint16_t net_idx, uint16_t addr, uint16_t keys, size_t key_cnt)
	Get a list of the target node's network key indexes.

int	bt_mesh_cfg_cli_net_key_del (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t *status)
	Delete a network key from the target node.

int	bt_mesh_cfg_cli_app_key_add (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint16_t key_app_idx, const uint8_t app_key[16], uint8_t *status)
	Add an application key to the target node.

int	bt_mesh_cfg_cli_app_key_get (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t status, uint16_t keys, size_t *key_cnt)
	Get a list of the target node's application key indexes for a specific network key.

int	bt_mesh_cfg_cli_app_key_del (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint16_t key_app_idx, uint8_t *status)
	Delete an application key from the target node.

int	bt_mesh_cfg_cli_mod_app_bind (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint8_t *status)
	Bind an application to a SIG model on the target node.

int	bt_mesh_cfg_cli_mod_app_unbind (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint8_t *status)
	Unbind an application from a SIG model on the target node.

int	bt_mesh_cfg_cli_mod_app_bind_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint16_t cid, uint8_t *status)
	Bind an application to a vendor model on the target node.

int	bt_mesh_cfg_cli_mod_app_unbind_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint16_t cid, uint8_t *status)
	Unbind an application from a vendor model on the target node.

int	bt_mesh_cfg_cli_mod_app_get (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint8_t status, uint16_t apps, size_t *app_cnt)
	Get a list of all applications bound to a SIG model on the target node.

int	bt_mesh_cfg_cli_mod_app_get_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, uint8_t status, uint16_t apps, size_t *app_cnt)
	Get a list of all applications bound to a vendor model on the target node.

int	bt_mesh_cfg_cli_mod_pub_get (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, struct bt_mesh_cfg_cli_mod_pub pub, uint8_t status)
	Get publish parameters for a SIG model on the target node.

int	bt_mesh_cfg_cli_mod_pub_get_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, struct bt_mesh_cfg_cli_mod_pub pub, uint8_t status)
	Get publish parameters for a vendor model on the target node.

int	bt_mesh_cfg_cli_mod_pub_set (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, struct bt_mesh_cfg_cli_mod_pub pub, uint8_t status)
	Set publish parameters for a SIG model on the target node.

int	bt_mesh_cfg_cli_mod_pub_set_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, struct bt_mesh_cfg_cli_mod_pub pub, uint8_t status)
	Set publish parameters for a vendor model on the target node.

int	bt_mesh_cfg_cli_mod_sub_add (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint8_t *status)
	Add a group address to a SIG model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_add_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint16_t cid, uint8_t *status)
	Add a group address to a vendor model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_del (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint8_t *status)
	Delete a group address in a SIG model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_del_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint16_t cid, uint8_t *status)
	Delete a group address in a vendor model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_overwrite (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint8_t *status)
	Overwrite all addresses in a SIG model's subscription list with a group address.

int	bt_mesh_cfg_cli_mod_sub_overwrite_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint16_t cid, uint8_t *status)
	Overwrite all addresses in a vendor model's subscription list with a group address.

int	bt_mesh_cfg_cli_mod_sub_va_add (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t virt_addr, uint8_t status)
	Add a virtual address to a SIG model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_va_add_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t cid, uint16_t virt_addr, uint8_t status)
	Add a virtual address to a vendor model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_va_del (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t virt_addr, uint8_t status)
	Delete a virtual address in a SIG model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_va_del_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t cid, uint16_t virt_addr, uint8_t status)
	Delete a virtual address in a vendor model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_va_overwrite (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t virt_addr, uint8_t status)
	Overwrite all addresses in a SIG model's subscription list with a virtual address.

int	bt_mesh_cfg_cli_mod_sub_va_overwrite_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t cid, uint16_t virt_addr, uint8_t status)
	Overwrite all addresses in a vendor model's subscription list with a virtual address.

int	bt_mesh_cfg_cli_mod_sub_get (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint8_t status, uint16_t subs, size_t *sub_cnt)
	Get the subscription list of a SIG model on the target node.

int	bt_mesh_cfg_cli_mod_sub_get_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, uint8_t status, uint16_t subs, size_t *sub_cnt)
	Get the subscription list of a vendor model on the target node.

int	bt_mesh_cfg_cli_hb_sub_set (uint16_t net_idx, uint16_t addr, struct bt_mesh_cfg_cli_hb_sub sub, uint8_t status)
	Set the target node's Heartbeat subscription parameters.

int	bt_mesh_cfg_cli_hb_sub_get (uint16_t net_idx, uint16_t addr, struct bt_mesh_cfg_cli_hb_sub sub, uint8_t status)
	Get the target node's Heartbeat subscription parameters.

int	bt_mesh_cfg_cli_hb_pub_set (uint16_t net_idx, uint16_t addr, const struct bt_mesh_cfg_cli_hb_pub pub, uint8_t status)
	Set the target node's Heartbeat publication parameters.

int	bt_mesh_cfg_cli_hb_pub_get (uint16_t net_idx, uint16_t addr, struct bt_mesh_cfg_cli_hb_pub pub, uint8_t status)
	Get the target node's Heartbeat publication parameters.

int	bt_mesh_cfg_cli_mod_sub_del_all (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint8_t *status)
	Delete all group addresses in a SIG model's subscription list.

int	bt_mesh_cfg_cli_mod_sub_del_all_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, uint8_t *status)
	Delete all group addresses in a vendor model's subscription list.

int	bt_mesh_cfg_cli_net_key_update (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, const uint8_t net_key[16], uint8_t *status)
	Update a network key to the target node.

int	bt_mesh_cfg_cli_app_key_update (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint16_t key_app_idx, const uint8_t app_key[16], uint8_t *status)
	Update an application key to the target node.

int	bt_mesh_cfg_cli_node_identity_set (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t new_identity, uint8_t status, uint8_t identity)
	Set the Node Identity parameters.

int	bt_mesh_cfg_cli_node_identity_get (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t status, uint8_t identity)
	Get the Node Identity parameters.

int	bt_mesh_cfg_cli_lpn_timeout_get (uint16_t net_idx, uint16_t addr, uint16_t unicast_addr, int32_t *polltimeout)
	Get the Low Power Node Polltimeout parameters.

int32_t	bt_mesh_cfg_cli_timeout_get (void)
	Get the current transmission timeout value.

void	bt_mesh_cfg_cli_timeout_set (int32_t timeout)
	Set the transmission timeout value.

int	bt_mesh_comp_p0_get (struct bt_mesh_comp_p0 comp, struct net_buf_simple buf)
	Create a composition data page 0 representation from a buffer.

struct bt_mesh_comp_p0_elem *	bt_mesh_comp_p0_elem_pull (const struct bt_mesh_comp_p0 comp, struct bt_mesh_comp_p0_elem elem)
	Pull a composition data page 0 element from a composition data page 0 instance.

uint16_t	bt_mesh_comp_p0_elem_mod (struct bt_mesh_comp_p0_elem *elem, int idx)
	Get a SIG model from the given composition data page 0 element.

struct bt_mesh_mod_id_vnd	bt_mesh_comp_p0_elem_mod_vnd (struct bt_mesh_comp_p0_elem *elem, int idx)
	Get a vendor model from the given composition data page 0 element.

struct bt_mesh_comp_p1_elem *	bt_mesh_comp_p1_elem_pull (struct net_buf_simple buf, struct bt_mesh_comp_p1_elem elem)
	Pull a Composition Data Page 1 Element from a composition data page 1 instance.

struct bt_mesh_comp_p1_model_item *	bt_mesh_comp_p1_item_pull (struct bt_mesh_comp_p1_elem elem, struct bt_mesh_comp_p1_model_item item)
	Pull a Composition Data Page 1 Model Item from a Composition Data Page 1 Element.

struct bt_mesh_comp_p1_ext_item *	bt_mesh_comp_p1_pull_ext_item (struct bt_mesh_comp_p1_model_item item, struct bt_mesh_comp_p1_ext_item ext_item)
	Pull Extended Model Item contained in Model Item.

struct bt_mesh_comp_p2_record *	bt_mesh_comp_p2_record_pull (struct net_buf_simple buf, struct bt_mesh_comp_p2_record record)
	Pull a Composition Data Page 2 Record from a composition data page 2 instance.

int	bt_mesh_key_idx_unpack_list (struct net_buf_simple buf, uint16_t dst_arr, size_t *dst_cnt)
	Unpack a list of key index entries from a buffer.

Detailed Description

Configuration Client Model .

Macro Definition Documentation

◆ BT_MESH_MODEL_CFG_CLI

#define BT_MESH_MODEL_CFG_CLI ( cli_data )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Value:

        BT_MESH_MODEL_CNT_CB(BT_MESH_MODEL_ID_CFG_CLI,  \
                             bt_mesh_cfg_cli_op, NULL,  \
                             cli_data, 1, 0, &bt_mesh_cfg_cli_cb)

Generic Configuration Client model composition data entry.

Parameters

cli_data Pointer to a Configuration Client Model instance.

◆ BT_MESH_PUB_PERIOD_100MS

#define BT_MESH_PUB_PERIOD_100MS ( steps )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Value:

((steps) & BIT_MASK(6))

BIT_MASK

#define BIT_MASK(n)

Bit mask with bits 0 through n-1 (inclusive) set, or 0 if n is 0.

Definition util_macro.h:68

Helper macro to encode model publication period in units of 100ms.

Parameters

steps Number of 100ms steps.

Returns: Encoded value that can be assigned to bt_mesh_cfg_cli_mod_pub.period

◆ BT_MESH_PUB_PERIOD_10MIN

#define BT_MESH_PUB_PERIOD_10MIN ( steps )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Value:

(((steps) & BIT_MASK(6)) | (3 << 6))

Helper macro to encode model publication period in units of 10 minutes.

Parameters

steps Number of 10 minute steps.

Returns: Encoded value that can be assigned to bt_mesh_cfg_cli_mod_pub.period

◆ BT_MESH_PUB_PERIOD_10SEC

#define BT_MESH_PUB_PERIOD_10SEC ( steps )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Value:

(((steps) & BIT_MASK(6)) | (2 << 6))

Helper macro to encode model publication period in units of 10 seconds.

Parameters

steps Number of 10 second steps.

Returns: Encoded value that can be assigned to bt_mesh_cfg_cli_mod_pub.period

◆ BT_MESH_PUB_PERIOD_SEC

#define BT_MESH_PUB_PERIOD_SEC ( steps )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Value:

(((steps) & BIT_MASK(6)) | (1 << 6))

Helper macro to encode model publication period in units of 1 second.

Parameters

steps Number of 1 second steps.

Returns: Encoded value that can be assigned to bt_mesh_cfg_cli_mod_pub.period

Function Documentation

◆ bt_mesh_cfg_cli_app_key_add()

int bt_mesh_cfg_cli_app_key_add	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint16_t	key_app_idx,
		const uint8_t	app_key[16],
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Add an application key to the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index the application key belongs to.
key_app_idx	Application key index.
app_key	Application key.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_app_key_del()

int bt_mesh_cfg_cli_app_key_del	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint16_t	key_app_idx,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete an application key from the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index the application key belongs to.
key_app_idx	Application key index.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_app_key_get()

int bt_mesh_cfg_cli_app_key_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint8_t *	status,
		uint16_t *	keys,
		size_t *	key_cnt )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get a list of the target node's application key indexes for a specific network key.

This method can be used asynchronously by setting status and ( keys or key_cnt ) as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index to request the app key indexes of.
status	Status response parameter.
keys	App key index list response parameter. Will be filled with all the returned application key indexes it can fill.
key_cnt	App key index list length. Should be set to the capacity of the `keys` list when calling. Will return the number of returned application key indexes upon success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_app_key_update()

int bt_mesh_cfg_cli_app_key_update	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint16_t	key_app_idx,
		const uint8_t	app_key[16],
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Update an application key to the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index the application key belongs to.
key_app_idx	Application key index.
app_key	Application key.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_beacon_get()

int bt_mesh_cfg_cli_beacon_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's network beacon state.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
status	Status response parameter, returns one of BT_MESH_BEACON_DISABLED or BT_MESH_BEACON_ENABLED on success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_beacon_set()

int bt_mesh_cfg_cli_beacon_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t	val,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's network beacon state.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
val	New network beacon state, should be one of BT_MESH_BEACON_DISABLED or BT_MESH_BEACON_ENABLED.
status	Status response parameter. Returns one of BT_MESH_BEACON_DISABLED or BT_MESH_BEACON_ENABLED on success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_comp_data_get()

int bt_mesh_cfg_cli_comp_data_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t	page,
		uint8_t *	rsp,
		struct net_buf_simple *	comp )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's composition data.

If the other device does not have the given composition data page, it will return the largest page number it supports that is less than the requested page index. The actual page the device responds with is returned in rsp.

This method can be used asynchronously by setting rsp and comp as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
page	Composition data page, or 0xff to request the first available page.
rsp	Return parameter for the returned page number, or NULL.
comp	Composition data buffer to fill.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_friend_get()

int bt_mesh_cfg_cli_friend_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's Friend feature status.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
status	Status response parameter. Returns one of BT_MESH_FRIEND_DISABLED, BT_MESH_FRIEND_ENABLED or BT_MESH_FRIEND_NOT_SUPPORTED on success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_friend_set()

int bt_mesh_cfg_cli_friend_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t	val,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's Friend feature state.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
val	New Friend feature state. Should be one of BT_MESH_FRIEND_DISABLED or BT_MESH_FRIEND_ENABLED.
status	Status response parameter. Returns one of BT_MESH_FRIEND_DISABLED, BT_MESH_FRIEND_ENABLED or BT_MESH_FRIEND_NOT_SUPPORTED on success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_gatt_proxy_get()

int bt_mesh_cfg_cli_gatt_proxy_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's Proxy feature state.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
status	Status response parameter. Returns one of BT_MESH_GATT_PROXY_DISABLED, BT_MESH_GATT_PROXY_ENABLED or BT_MESH_GATT_PROXY_NOT_SUPPORTED on success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_gatt_proxy_set()

int bt_mesh_cfg_cli_gatt_proxy_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t	val,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's Proxy feature state.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
val	New Proxy feature state. Must be one of BT_MESH_GATT_PROXY_DISABLED or BT_MESH_GATT_PROXY_ENABLED.
status	Status response parameter. Returns one of BT_MESH_GATT_PROXY_DISABLED, BT_MESH_GATT_PROXY_ENABLED or BT_MESH_GATT_PROXY_NOT_SUPPORTED on success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_hb_pub_get()

int bt_mesh_cfg_cli_hb_pub_get	(	uint16_t	net_idx,
		uint16_t	addr,
		struct bt_mesh_cfg_cli_hb_pub *	pub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's Heartbeat publication parameters.

This method can be used asynchronously by setting status and pub as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
pub	Heartbeat publication parameter return buffer.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_hb_pub_set()

int bt_mesh_cfg_cli_hb_pub_set	(	uint16_t	net_idx,
		uint16_t	addr,
		const struct bt_mesh_cfg_cli_hb_pub *	pub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's Heartbeat publication parameters.

Note: The target node must already have received the specified network key.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

pub shall not be NULL;

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
pub	New Heartbeat publication parameters.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_hb_sub_get()

int bt_mesh_cfg_cli_hb_sub_get	(	uint16_t	net_idx,
		uint16_t	addr,
		struct bt_mesh_cfg_cli_hb_sub *	sub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's Heartbeat subscription parameters.

This method can be used asynchronously by setting status and sub as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
sub	Heartbeat subscription parameter return buffer.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_hb_sub_set()

int bt_mesh_cfg_cli_hb_sub_set	(	uint16_t	net_idx,
		uint16_t	addr,
		struct bt_mesh_cfg_cli_hb_sub *	sub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's Heartbeat subscription parameters.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

sub shall not be null.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
sub	New Heartbeat subscription parameters.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_krp_get()

int bt_mesh_cfg_cli_krp_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint8_t *	status,
		uint8_t *	phase )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's network key refresh phase state.

This method can be used asynchronously by setting status and phase as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index.
status	Status response parameter.
phase	Pointer to the Key Refresh variable to fill.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_krp_set()

int bt_mesh_cfg_cli_krp_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint8_t	transition,
		uint8_t *	status,
		uint8_t *	phase )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's network key refresh phase parameters.

This method can be used asynchronously by setting status and phase as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index.
transition	Transition parameter.
status	Status response parameter.
phase	Pointer to the new Key Refresh phase. Will return the actual Key Refresh phase after updating.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_lpn_timeout_get()

int bt_mesh_cfg_cli_lpn_timeout_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	unicast_addr,
		int32_t *	polltimeout )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the Low Power Node Polltimeout parameters.

This method can be used asynchronously by setting polltimeout as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
unicast_addr	LPN unicast address.
polltimeout	Poll timeout response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_app_bind()

int bt_mesh_cfg_cli_mod_app_bind	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_app_idx,
		uint16_t	mod_id,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Bind an application to a SIG model on the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_app_idx	Application index to bind.
mod_id	Model ID.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_app_bind_vnd()

int bt_mesh_cfg_cli_mod_app_bind_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_app_idx,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Bind an application to a vendor model on the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_app_idx	Application index to bind.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_app_get()

int bt_mesh_cfg_cli_mod_app_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint8_t *	status,
		uint16_t *	apps,
		size_t *	app_cnt )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get a list of all applications bound to a SIG model on the target node.

This method can be used asynchronously by setting status and ( apps or app_cnt ) as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
status	Status response parameter.
apps	App index list response parameter. Will be filled with all the returned application key indexes it can fill.
app_cnt	App index list length. Should be set to the capacity of the `apps` list when calling. Will return the number of returned application key indexes upon success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_app_get_vnd()

int bt_mesh_cfg_cli_mod_app_get_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status,
		uint16_t *	apps,
		size_t *	app_cnt )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get a list of all applications bound to a vendor model on the target node.

This method can be used asynchronously by setting status and ( apps or app_cnt ) as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.
apps	App index list response parameter. Will be filled with all the returned application key indexes it can fill.
app_cnt	App index list length. Should be set to the capacity of the `apps` list when calling. Will return the number of returned application key indexes upon success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_app_unbind()

int bt_mesh_cfg_cli_mod_app_unbind	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_app_idx,
		uint16_t	mod_id,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Unbind an application from a SIG model on the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_app_idx	Application index to unbind.
mod_id	Model ID.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_app_unbind_vnd()

int bt_mesh_cfg_cli_mod_app_unbind_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_app_idx,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Unbind an application from a vendor model on the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_app_idx	Application index to unbind.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_pub_get()

int bt_mesh_cfg_cli_mod_pub_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		struct bt_mesh_cfg_cli_mod_pub *	pub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get publish parameters for a SIG model on the target node.

This method can be used asynchronously by setting status and pub as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
pub	Publication parameter return buffer.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_pub_get_vnd()

int bt_mesh_cfg_cli_mod_pub_get_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		struct bt_mesh_cfg_cli_mod_pub *	pub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get publish parameters for a vendor model on the target node.

This method can be used asynchronously by setting status and pub as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
cid	Company ID of the model.
pub	Publication parameter return buffer.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_pub_set()

int bt_mesh_cfg_cli_mod_pub_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		struct bt_mesh_cfg_cli_mod_pub *	pub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set publish parameters for a SIG model on the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

pub shall not be NULL.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
pub	Publication parameters.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_pub_set_vnd()

int bt_mesh_cfg_cli_mod_pub_set_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		struct bt_mesh_cfg_cli_mod_pub *	pub,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set publish parameters for a vendor model on the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

pub shall not be NULL.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
cid	Company ID of the model.
pub	Publication parameters.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_add()

int bt_mesh_cfg_cli_mod_sub_add	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	sub_addr,
		uint16_t	mod_id,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Add a group address to a SIG model's subscription list.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
sub_addr	Group address to add to the subscription list.
mod_id	Model ID.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_add_vnd()

int bt_mesh_cfg_cli_mod_sub_add_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	sub_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Add a group address to a vendor model's subscription list.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
sub_addr	Group address to add to the subscription list.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_del()

int bt_mesh_cfg_cli_mod_sub_del	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	sub_addr,
		uint16_t	mod_id,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete a group address in a SIG model's subscription list.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
sub_addr	Group address to add to the subscription list.
mod_id	Model ID.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_del_all()

int bt_mesh_cfg_cli_mod_sub_del_all	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete all group addresses in a SIG model's subscription list.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_del_all_vnd()

int bt_mesh_cfg_cli_mod_sub_del_all_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete all group addresses in a vendor model's subscription list.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_del_vnd()

int bt_mesh_cfg_cli_mod_sub_del_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	sub_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete a group address in a vendor model's subscription list.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
sub_addr	Group address to add to the subscription list.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_get()

int bt_mesh_cfg_cli_mod_sub_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint8_t *	status,
		uint16_t *	subs,
		size_t *	sub_cnt )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the subscription list of a SIG model on the target node.

This method can be used asynchronously by setting status and ( subs or sub_cnt ) as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
status	Status response parameter.
subs	Subscription list response parameter. Will be filled with all the returned subscriptions it can fill.
sub_cnt	Subscription list element count. Should be set to the capacity of the `subs` list when calling. Will return the number of returned subscriptions upon success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_get_vnd()

int bt_mesh_cfg_cli_mod_sub_get_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status,
		uint16_t *	subs,
		size_t *	sub_cnt )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the subscription list of a vendor model on the target node.

This method can be used asynchronously by setting status and ( subs or sub_cnt ) as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.
subs	Subscription list response parameter. Will be filled with all the returned subscriptions it can fill.
sub_cnt	Subscription list element count. Should be set to the capacity of the `subs` list when calling. Will return the number of returned subscriptions upon success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_overwrite()

int bt_mesh_cfg_cli_mod_sub_overwrite	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	sub_addr,
		uint16_t	mod_id,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Overwrite all addresses in a SIG model's subscription list with a group address.

Deletes all subscriptions in the model's subscription list, and adds a single group address instead.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
sub_addr	Group address to add to the subscription list.
mod_id	Model ID.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_overwrite_vnd()

int bt_mesh_cfg_cli_mod_sub_overwrite_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		uint16_t	sub_addr,
		uint16_t	mod_id,
		uint16_t	cid,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Overwrite all addresses in a vendor model's subscription list with a group address.

Deletes all subscriptions in the model's subscription list, and adds a single group address instead.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
sub_addr	Group address to add to the subscription list.
mod_id	Model ID.
cid	Company ID of the model.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_va_add()

int bt_mesh_cfg_cli_mod_sub_va_add	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		const uint8_t	label[16],
		uint16_t	mod_id,
		uint16_t *	virt_addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Add a virtual address to a SIG model's subscription list.

This method can be used asynchronously by setting status and virt_addr as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
label	Virtual address label to add to the subscription list.
mod_id	Model ID.
virt_addr	Virtual address response parameter.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_va_add_vnd()

int bt_mesh_cfg_cli_mod_sub_va_add_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		const uint8_t	label[16],
		uint16_t	mod_id,
		uint16_t	cid,
		uint16_t *	virt_addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Add a virtual address to a vendor model's subscription list.

This method can be used asynchronously by setting status and virt_addr as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
label	Virtual address label to add to the subscription list.
mod_id	Model ID.
cid	Company ID of the model.
virt_addr	Virtual address response parameter.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_va_del()

int bt_mesh_cfg_cli_mod_sub_va_del	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		const uint8_t	label[16],
		uint16_t	mod_id,
		uint16_t *	virt_addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete a virtual address in a SIG model's subscription list.

This method can be used asynchronously by setting status and virt_addr as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
label	Virtual address parameter to add to the subscription list.
mod_id	Model ID.
virt_addr	Virtual address response parameter.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_va_del_vnd()

int bt_mesh_cfg_cli_mod_sub_va_del_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		const uint8_t	label[16],
		uint16_t	mod_id,
		uint16_t	cid,
		uint16_t *	virt_addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete a virtual address in a vendor model's subscription list.

This method can be used asynchronously by setting status and virt_addr as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
label	Virtual address label to add to the subscription list.
mod_id	Model ID.
cid	Company ID of the model.
virt_addr	Virtual address response parameter.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_va_overwrite()

int bt_mesh_cfg_cli_mod_sub_va_overwrite	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		const uint8_t	label[16],
		uint16_t	mod_id,
		uint16_t *	virt_addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Overwrite all addresses in a SIG model's subscription list with a virtual address.

Deletes all subscriptions in the model's subscription list, and adds a single group address instead.

This method can be used asynchronously by setting status and virt_addr as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
label	Virtual address label to add to the subscription list.
mod_id	Model ID.
virt_addr	Virtual address response parameter.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_mod_sub_va_overwrite_vnd()

int bt_mesh_cfg_cli_mod_sub_va_overwrite_vnd	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	elem_addr,
		const uint8_t	label[16],
		uint16_t	mod_id,
		uint16_t	cid,
		uint16_t *	virt_addr,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Overwrite all addresses in a vendor model's subscription list with a virtual address.

Deletes all subscriptions in the model's subscription list, and adds a single group address instead.

This method can be used asynchronously by setting status and virt_addr as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
elem_addr	Element address the model is in.
label	Virtual address label to add to the subscription list.
mod_id	Model ID.
cid	Company ID of the model.
virt_addr	Virtual address response parameter.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_net_key_add()

int bt_mesh_cfg_cli_net_key_add	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		const uint8_t	net_key[16],
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Add a network key to the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index.
net_key	Network key.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_net_key_del()

int bt_mesh_cfg_cli_net_key_del	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Delete a network key from the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_net_key_get()

int bt_mesh_cfg_cli_net_key_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t *	keys,
		size_t *	key_cnt )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get a list of the target node's network key indexes.

This method can be used asynchronously by setting keys or key_cnt as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
keys	Net key index list response parameter. Will be filled with all the returned network key indexes it can fill.
key_cnt	Net key index list length. Should be set to the capacity of the `keys` list when calling. Will return the number of returned network key indexes upon success.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_net_key_update()

int bt_mesh_cfg_cli_net_key_update	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		const uint8_t	net_key[16],
		uint8_t *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Update a network key to the target node.

This method can be used asynchronously by setting status as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index.
net_key	Network key.
status	Status response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_net_transmit_get()

int bt_mesh_cfg_cli_net_transmit_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t *	transmit )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's network_transmit state.

This method can be used asynchronously by setting transmit as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
transmit	Network transmit response parameter. Returns the encoded network transmission parameters on success. Decoded with BT_MESH_TRANSMIT_COUNT and BT_MESH_TRANSMIT_INT.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_net_transmit_set()

int bt_mesh_cfg_cli_net_transmit_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t	val,
		uint8_t *	transmit )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's network transmit parameters.

This method can be used asynchronously by setting transmit as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
val	New encoded network transmit parameters.

See also: BT_MESH_TRANSMIT.

Parameters

transmit Network transmit response parameter. Returns the encoded network transmission parameters on success. Decoded with BT_MESH_TRANSMIT_COUNT and BT_MESH_TRANSMIT_INT.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_node_identity_get()

int bt_mesh_cfg_cli_node_identity_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint8_t *	status,
		uint8_t *	identity )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the Node Identity parameters.

This method can be used asynchronously by setting status and identity as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
key_net_idx	Network key index the application key belongs to.
status	Status response parameter.
identity	Identity response parameter. Must be one of BT_MESH_NODE_IDENTITY_STOPPED or BT_MESH_NODE_IDENTITY_RUNNING

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_node_identity_set()

int bt_mesh_cfg_cli_node_identity_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint16_t	key_net_idx,
		uint8_t	new_identity,
		uint8_t *	status,
		uint8_t *	identity )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the Node Identity parameters.

This method can be used asynchronously by setting status and identity as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
new_identity	New identity state. Must be one of BT_MESH_NODE_IDENTITY_STOPPED or BT_MESH_NODE_IDENTITY_RUNNING
key_net_idx	Network key index the application key belongs to.
status	Status response parameter.
identity	Identity response parameter.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_node_reset()

int bt_mesh_cfg_cli_node_reset	(	uint16_t	net_idx,
		uint16_t	addr,
		bool *	status )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Reset the target node and remove it from the network.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
status	Status response parameter

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_relay_get()

int bt_mesh_cfg_cli_relay_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t *	status,
		uint8_t *	transmit )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's Relay feature state.

This method can be used asynchronously by setting status and transmit as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
status	Status response parameter. Returns one of BT_MESH_RELAY_DISABLED, BT_MESH_RELAY_ENABLED or BT_MESH_RELAY_NOT_SUPPORTED on success.
transmit	Transmit response parameter. Returns the encoded relay transmission parameters on success. Decoded with BT_MESH_TRANSMIT_COUNT and BT_MESH_TRANSMIT_INT.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_relay_set()

int bt_mesh_cfg_cli_relay_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t	new_relay,
		uint8_t	new_transmit,
		uint8_t *	status,
		uint8_t *	transmit )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's Relay parameters.

This method can be used asynchronously by setting status and transmit as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
new_relay	New relay state. Must be one of BT_MESH_RELAY_DISABLED or BT_MESH_RELAY_ENABLED.
new_transmit	New encoded relay transmit parameters.

See also: BT_MESH_TRANSMIT.

Parameters

status	Status response parameter. Returns one of BT_MESH_RELAY_DISABLED, BT_MESH_RELAY_ENABLED or BT_MESH_RELAY_NOT_SUPPORTED on success.
transmit	Transmit response parameter. Returns the encoded relay transmission parameters on success. Decoded with BT_MESH_TRANSMIT_COUNT and BT_MESH_TRANSMIT_INT.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_timeout_get()

int32_t bt_mesh_cfg_cli_timeout_get ( void )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the current transmission timeout value.

Returns: The configured transmission timeout in milliseconds.

◆ bt_mesh_cfg_cli_timeout_set()

void bt_mesh_cfg_cli_timeout_set ( int32_t timeout )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the transmission timeout value.

Parameters

timeout The new transmission timeout.

◆ bt_mesh_cfg_cli_ttl_get()

int bt_mesh_cfg_cli_ttl_get	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t *	ttl )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get the target node's Time To Live value.

This method can be used asynchronously by setting ttl as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
ttl	TTL response buffer.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_cfg_cli_ttl_set()

int bt_mesh_cfg_cli_ttl_set	(	uint16_t	net_idx,
		uint16_t	addr,
		uint8_t	val,
		uint8_t *	ttl )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Set the target node's Time To Live value.

This method can be used asynchronously by setting ttl as NULL. This way the method will not wait for response and will return immediately after sending the command.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
val	New Time To Live value.
ttl	TTL response buffer.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_comp_p0_elem_mod()

uint16_t bt_mesh_comp_p0_elem_mod	(	struct bt_mesh_comp_p0_elem *	elem,
		int	idx )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get a SIG model from the given composition data page 0 element.

Parameters

elem	Element to read the model from.
idx	Index of the SIG model to read.

Returns: The Model ID of the SIG model at the given index, or 0xffff if the index is out of bounds.

◆ bt_mesh_comp_p0_elem_mod_vnd()

struct bt_mesh_mod_id_vnd bt_mesh_comp_p0_elem_mod_vnd	(	struct bt_mesh_comp_p0_elem *	elem,
		int	idx )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Get a vendor model from the given composition data page 0 element.

Parameters

elem	Element to read the model from.
idx	Index of the vendor model to read.

Returns: The model ID of the vendor model at the given index, or {0xffff, 0xffff} if the index is out of bounds.

◆ bt_mesh_comp_p0_elem_pull()

struct bt_mesh_comp_p0_elem * bt_mesh_comp_p0_elem_pull	(	const struct bt_mesh_comp_p0 *	comp,
		struct bt_mesh_comp_p0_elem *	elem )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Pull a composition data page 0 element from a composition data page 0 instance.

Each call to this function will pull out a new element from the composition data page, until all elements have been pulled.

Parameters

comp	Composition data page
elem	Element to fill.

Returns: A pointer to elem on success, or NULL if no more elements could be pulled.

◆ bt_mesh_comp_p0_get()

int bt_mesh_comp_p0_get	(	struct bt_mesh_comp_p0 *	comp,
		struct net_buf_simple *	buf )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Create a composition data page 0 representation from a buffer.

The composition data page object will take ownership over the buffer, which should not be manipulated directly after this call.

This function can be used in combination with bt_mesh_cfg_cli_comp_data_get to read out composition data page 0 from other devices:

NET_BUF_SIMPLE_DEFINE(buf, BT_MESH_RX_SDU_MAX);
struct bt_mesh_comp_p0 comp;
 
err = bt_mesh_cfg_cli_comp_data_get(net_idx, addr, 0, &page, &buf);
if (!err) {
        bt_mesh_comp_p0_get(&comp, &buf);
}

Parameters

buf	Network buffer containing composition data.
comp	Composition data structure to fill.

Returns: 0 on success, or (negative) error code on failure.

◆ bt_mesh_comp_p1_elem_pull()

struct bt_mesh_comp_p1_elem * bt_mesh_comp_p1_elem_pull	(	struct net_buf_simple *	buf,
		struct bt_mesh_comp_p1_elem *	elem )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Pull a Composition Data Page 1 Element from a composition data page 1 instance.

Each call to this function will pull out a new element from the composition data page, until all elements have been pulled.

Parameters

buf	Composition data page 1 buffer
elem	Element to fill.

Returns: A pointer to elem on success, or NULL if no more elements could be pulled.

◆ bt_mesh_comp_p1_item_pull()

struct bt_mesh_comp_p1_model_item * bt_mesh_comp_p1_item_pull	(	struct bt_mesh_comp_p1_elem *	elem,
		struct bt_mesh_comp_p1_model_item *	item )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Pull a Composition Data Page 1 Model Item from a Composition Data Page 1 Element.

Each call to this function will pull out a new item from the Composition Data Page 1 Element, until all items have been pulled.

Parameters

elem	Composition data page 1 Element
item	Model Item to fill.

Returns: A pointer to item on success, or NULL if no more elements could be pulled.

◆ bt_mesh_comp_p1_pull_ext_item()

struct bt_mesh_comp_p1_ext_item * bt_mesh_comp_p1_pull_ext_item	(	struct bt_mesh_comp_p1_model_item *	item,
		struct bt_mesh_comp_p1_ext_item *	ext_item )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Pull Extended Model Item contained in Model Item.

Each call to this function will pull out a new element from the Extended Model Item, until all elements have been pulled.

Parameters

item	Model Item to pull Extended Model Items from
ext_item	Extended Model Item to fill

Returns: A pointer to ext_item on success, or NULL if item could not be pulled

◆ bt_mesh_comp_p2_record_pull()

struct bt_mesh_comp_p2_record * bt_mesh_comp_p2_record_pull	(	struct net_buf_simple *	buf,
		struct bt_mesh_comp_p2_record *	record )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Pull a Composition Data Page 2 Record from a composition data page 2 instance.

Each call to this function will pull out a new element from the composition data page, until all elements have been pulled.

Parameters

buf	Composition data page 2 buffer
record	Record to fill.

Returns: A pointer to record on success, or NULL if no more elements could be pulled.

◆ bt_mesh_key_idx_unpack_list()

int bt_mesh_key_idx_unpack_list	(	struct net_buf_simple *	buf,
		uint16_t *	dst_arr,
		size_t *	dst_cnt )

#include <zephyr/bluetooth/mesh/cfg_cli.h>

Unpack a list of key index entries from a buffer.

On success, dst_cnt is set to the amount of unpacked key index entries.

Parameters

buf	Message buffer containing encoded AppKey or NetKey Indexes.
dst_arr	Destination array for the unpacked list.
dst_cnt	Size of the destination array.

Returns: 0 on success.; -EMSGSIZE if dst_arr size is to small to parse full message.

Data Structures

Macros

Functions

Detailed Description

Macro Definition Documentation

◆ BT_MESH_MODEL_CFG_CLI

◆ BT_MESH_PUB_PERIOD_100MS

◆ BT_MESH_PUB_PERIOD_10MIN

◆ BT_MESH_PUB_PERIOD_10SEC

◆ BT_MESH_PUB_PERIOD_SEC

Function Documentation

◆ bt_mesh_cfg_cli_app_key_add()

◆ bt_mesh_cfg_cli_app_key_del()

◆ bt_mesh_cfg_cli_app_key_get()

◆ bt_mesh_cfg_cli_app_key_update()

◆ bt_mesh_cfg_cli_beacon_get()

◆ bt_mesh_cfg_cli_beacon_set()

◆ bt_mesh_cfg_cli_comp_data_get()

◆ bt_mesh_cfg_cli_friend_get()

◆ bt_mesh_cfg_cli_friend_set()

◆ bt_mesh_cfg_cli_gatt_proxy_get()

◆ bt_mesh_cfg_cli_gatt_proxy_set()

◆ bt_mesh_cfg_cli_hb_pub_get()

◆ bt_mesh_cfg_cli_hb_pub_set()

◆ bt_mesh_cfg_cli_hb_sub_get()

◆ bt_mesh_cfg_cli_hb_sub_set()

◆ bt_mesh_cfg_cli_krp_get()

◆ bt_mesh_cfg_cli_krp_set()

◆ bt_mesh_cfg_cli_lpn_timeout_get()

◆ bt_mesh_cfg_cli_mod_app_bind()

◆ bt_mesh_cfg_cli_mod_app_bind_vnd()

◆ bt_mesh_cfg_cli_mod_app_get()

◆ bt_mesh_cfg_cli_mod_app_get_vnd()

◆ bt_mesh_cfg_cli_mod_app_unbind()

◆ bt_mesh_cfg_cli_mod_app_unbind_vnd()

◆ bt_mesh_cfg_cli_mod_pub_get()

◆ bt_mesh_cfg_cli_mod_pub_get_vnd()

◆ bt_mesh_cfg_cli_mod_pub_set()

◆ bt_mesh_cfg_cli_mod_pub_set_vnd()

◆ bt_mesh_cfg_cli_mod_sub_add()

◆ bt_mesh_cfg_cli_mod_sub_add_vnd()

◆ bt_mesh_cfg_cli_mod_sub_del()

◆ bt_mesh_cfg_cli_mod_sub_del_all()

◆ bt_mesh_cfg_cli_mod_sub_del_all_vnd()

◆ bt_mesh_cfg_cli_mod_sub_del_vnd()

◆ bt_mesh_cfg_cli_mod_sub_get()

◆ bt_mesh_cfg_cli_mod_sub_get_vnd()

◆ bt_mesh_cfg_cli_mod_sub_overwrite()

◆ bt_mesh_cfg_cli_mod_sub_overwrite_vnd()

◆ bt_mesh_cfg_cli_mod_sub_va_add()

◆ bt_mesh_cfg_cli_mod_sub_va_add_vnd()

◆ bt_mesh_cfg_cli_mod_sub_va_del()

◆ bt_mesh_cfg_cli_mod_sub_va_del_vnd()

◆ bt_mesh_cfg_cli_mod_sub_va_overwrite()

◆ bt_mesh_cfg_cli_mod_sub_va_overwrite_vnd()

◆ bt_mesh_cfg_cli_net_key_add()

◆ bt_mesh_cfg_cli_net_key_del()

◆ bt_mesh_cfg_cli_net_key_get()

◆ bt_mesh_cfg_cli_net_key_update()

◆ bt_mesh_cfg_cli_net_transmit_get()

◆ bt_mesh_cfg_cli_net_transmit_set()

◆ bt_mesh_cfg_cli_node_identity_get()

◆ bt_mesh_cfg_cli_node_identity_set()

◆ bt_mesh_cfg_cli_node_reset()

◆ bt_mesh_cfg_cli_relay_get()

◆ bt_mesh_cfg_cli_relay_set()

◆ bt_mesh_cfg_cli_timeout_get()

◆ bt_mesh_cfg_cli_timeout_set()

◆ bt_mesh_cfg_cli_ttl_get()

◆ bt_mesh_cfg_cli_ttl_set()

◆ bt_mesh_comp_p0_elem_mod()

◆ bt_mesh_comp_p0_elem_mod_vnd()

◆ bt_mesh_comp_p0_elem_pull()

◆ bt_mesh_comp_p0_get()

◆ bt_mesh_comp_p1_elem_pull()

◆ bt_mesh_comp_p1_item_pull()

◆ bt_mesh_comp_p1_pull_ext_item()

◆ bt_mesh_comp_p2_record_pull()

◆ bt_mesh_key_idx_unpack_list()