modbus.h File Reference

#include <zephyr/drivers/uart.h>
#include <zephyr/sys/slist.h>

Go to the source code of this file.

Data Structures
struct	modbus_adu
	Frame struct used internally and for raw ADU support. More...
struct	modbus_user_callbacks
	Modbus Server User Callback structure. More...
struct	modbus_serial_param
	Modbus serial line parameter. More...
struct	modbus_server_param
	Modbus server parameter. More...
struct	modbus_raw_cb
struct	modbus_iface_param
	User parameter structure to configure Modbus interface as client or server. More...

Macros
#define	MODBUS_MBAP_LENGTH   7
	Length of MBAP Header.
#define	MODBUS_MBAP_AND_FC_LENGTH   (MODBUS_MBAP_LENGTH + 1)
	Length of MBAP Header plus function code.
#define	MODBUS_CUSTOM_FC_DEFINE(name, user_cb, user_fc, userdata)
	INTERNAL_HIDDEN.
Modbus exception codes
#define	MODBUS_EXC_NONE   0
	No exception.
#define	MODBUS_EXC_ILLEGAL_FC   1
	Illegal function code.
#define	MODBUS_EXC_ILLEGAL_DATA_ADDR   2
	Illegal data address.
#define	MODBUS_EXC_ILLEGAL_DATA_VAL   3
	Illegal data value.
#define	MODBUS_EXC_SERVER_DEVICE_FAILURE   4
	Server device failure.
#define	MODBUS_EXC_ACK   5
	Acknowledge.
#define	MODBUS_EXC_SERVER_DEVICE_BUSY   6
	Server device busy.
#define	MODBUS_EXC_MEM_PARITY_ERROR   8
	Memory parity error.
#define	MODBUS_EXC_GW_PATH_UNAVAILABLE   10
	Gateway path unavailable.
#define	MODBUS_EXC_GW_TARGET_FAILED_TO_RESP   11
	Gateway target device failed to respond.

Typedefs
typedef int(*	modbus_raw_cb_t) (const int iface, const struct modbus_adu *adu, void *user_data)
	ADU raw callback function signature.
typedef bool(*	modbus_custom_cb_t) (const int iface, const struct modbus_adu *const rx_adu, struct modbus_adu *const tx_adu, uint8_t *const excep_code, void *const user_data)
	Custom function code handler function signature.

Enumerations
enum	modbus_mode { MODBUS_MODE_RTU , MODBUS_MODE_ASCII , MODBUS_MODE_RAW }
	Modbus interface mode. More...

Functions
int	modbus_read_coils (const int iface, const uint8_t unit_id, const uint16_t start_addr, uint8_t *const coil_tbl, const uint16_t num_coils)
	Coil read (FC01)
int	modbus_read_dinputs (const int iface, const uint8_t unit_id, const uint16_t start_addr, uint8_t *const di_tbl, const uint16_t num_di)
	Read discrete inputs (FC02)
int	modbus_read_holding_regs (const int iface, const uint8_t unit_id, const uint16_t start_addr, uint16_t *const reg_buf, const uint16_t num_regs)
	Read holding registers (FC03)
int	modbus_read_input_regs (const int iface, const uint8_t unit_id, const uint16_t start_addr, uint16_t *const reg_buf, const uint16_t num_regs)
	Read input registers (FC04)
int	modbus_write_coil (const int iface, const uint8_t unit_id, const uint16_t coil_addr, const bool coil_state)
	Write single coil (FC05)
int	modbus_write_holding_reg (const int iface, const uint8_t unit_id, const uint16_t start_addr, const uint16_t reg_val)
	Write single holding register (FC06)
int	modbus_request_diagnostic (const int iface, const uint8_t unit_id, const uint16_t sfunc, const uint16_t data, uint16_t *const data_out)
	Read diagnostic (FC08)
int	modbus_write_coils (const int iface, const uint8_t unit_id, const uint16_t start_addr, uint8_t *const coil_tbl, const uint16_t num_coils)
	Write coils (FC15)
int	modbus_write_holding_regs (const int iface, const uint8_t unit_id, const uint16_t start_addr, uint16_t *const reg_buf, const uint16_t num_regs)
	Write holding registers (FC16)
int	modbus_read_holding_regs_fp (const int iface, const uint8_t unit_id, const uint16_t start_addr, float *const reg_buf, const uint16_t num_regs)
	Read floating-point holding registers (FC03)
int	modbus_write_holding_regs_fp (const int iface, const uint8_t unit_id, const uint16_t start_addr, float *const reg_buf, const uint16_t num_regs)
	Write floating-point holding registers (FC16)
int	modbus_iface_get_by_name (const char *iface_name)
	Get Modbus interface index according to interface name.
int	modbus_init_server (const int iface, struct modbus_iface_param param)
	Configure Modbus Interface as raw ADU server.
int	modbus_init_client (const int iface, struct modbus_iface_param param)
	Configure Modbus Interface as raw ADU client.
int	modbus_disable (const uint8_t iface)
	Disable Modbus Interface.
int	modbus_raw_submit_rx (const int iface, const struct modbus_adu *adu)
	Submit raw ADU.
void	modbus_raw_put_header (const struct modbus_adu *adu, uint8_t *header)
	Put MBAP header into a buffer.
void	modbus_raw_get_header (struct modbus_adu *adu, const uint8_t *header)
	Get MBAP header from a buffer.
void	modbus_raw_set_server_failure (struct modbus_adu *adu)
	Set Server Device Failure exception.
int	modbus_raw_backend_txn (const int iface, struct modbus_adu *adu)
	Use interface as backend to send and receive ADU.
int	modbus_register_user_fc (const int iface, struct modbus_custom_fc *custom_fc)
	Register a user-defined function code handler.