Structure containing the configuration of a LoRa modem. More...

#include <lora.h>

Data Fields
uint32_t	frequency
	Frequency in Hz to use for transceiving.

enum lora_signal_bandwidth	bandwidth
	The bandwidth to use for transceiving.

enum lora_datarate	datarate
	The data-rate to use for transceiving.

enum lora_coding_rate	coding_rate
	The coding rate to use for transceiving.

uint16_t	preamble_len
	Length of the preamble.

int8_t	tx_power
	TX-power in dBm to use for transmission.

bool	tx
	Set to true for transmission, false for receiving.

bool	iq_inverted
	Invert the In-Phase and Quadrature (IQ) signals.

bool	public_network
	Sets the sync-byte to use:

Detailed Description

Structure containing the configuration of a LoRa modem.

Field Documentation

◆ bandwidth

enum lora_signal_bandwidth lora_modem_config::bandwidth

The bandwidth to use for transceiving.

◆ coding_rate

enum lora_coding_rate lora_modem_config::coding_rate

The coding rate to use for transceiving.

◆ datarate

enum lora_datarate lora_modem_config::datarate

The data-rate to use for transceiving.

◆ frequency

uint32_t lora_modem_config::frequency

Frequency in Hz to use for transceiving.

◆ iq_inverted

bool lora_modem_config::iq_inverted

Invert the In-Phase and Quadrature (IQ) signals.

Normally this should be set to false. In advanced use-cases where a differentation is needed between "uplink" and "downlink" traffic, the IQ can be inverted to create two different channels on the same frequency

◆ preamble_len

uint16_t lora_modem_config::preamble_len

Length of the preamble.

◆ public_network

bool lora_modem_config::public_network

Sets the sync-byte to use:

false: for using the private network sync-byte
true: for using the public network sync-byte The public network sync-byte is only intended for advanced usage. Normally the private network sync-byte should be used for peer to peer communications and the LoRaWAN APIs should be used for interacting with a public network.

◆ tx

bool lora_modem_config::tx

Set to true for transmission, false for receiving.

◆ tx_power

int8_t lora_modem_config::tx_power

TX-power in dBm to use for transmission.

The documentation for this struct was generated from the following file:

zephyr/drivers/lora.h

Data Fields