X-NUCLEO-IKS01A2 shield - Standard (Mode 1)
Overview
This sample enables all sensors of a X-NUCLEO-IKS01A2 shield, and then periodically reads and displays data from the shield sensors:
HTS221: Ambient temperature and relative humidity
LPS22HB: Atmospheric pressure and ambient temperature
LSM6DSL: 3-Axis Acceleration and 3-Axis Angular Velocity
LSM303AGR 3-Axis Acceleration and 3-axis Magnetic field intensity
Requirements
This sample communicates over I2C with the X-NUCLEO-IKS01A2 shield stacked on a board with an Arduino connector. The board’s I2C must be configured for the I2C Arduino connector in the devicetree. See for example the Nucleo F401RE board source code:
Please note that this sample can’t be used with boards already supporting one of the sensors available on the shield (such as disco_l475_iot1) as zephyr does not yet support sensors multiple instances.
References
-X-NUCLEO-IKS01A2: https://www.st.com/en/ecosystems/x-nucleo-iks01a2.html
Building and Running
This sample runs with X-NUCLEO-IKS01A2 stacked on any board with a matching Arduino connector. For this example, we use a Nucleo F401RE board.
west build -b nucleo_f401re samples/shields/x_nucleo_iks01a2/standard
Sample Output
X-NUCLEO-IKS01A2 sensor dashboard HTS221: Temperature: 26.3 C HTS221: Relative Humidity: 44.5% LPS22HB: Pressure:99.220 kpa LPS22HB: Temperature: 26.1 C LSM6DSL: Accel (m.s-2): x: -0.0, y: -0.1, z: 10.0 LSM6DSL: Gyro (dps): x: 0.028, y: -0.025, z: 0.014 LSM303AGR: Accel (m.s-2): x: 0.3, y: -0.1, z: 9.7 LSM303AGR: Magn (gauss): x: -0.221, y: -0.042, z: -0.458 <updated endlessly every 2 seconds>