Tracing
This application can be used to demonstrate the tracing feature. The tracing formatted packet will be sent to the host with the currently supported tracing backend under tracing generic infrastructure.
Requirements
Depends of the boards which you are using, choose one of .conf files for use tracing subsys.
Usage for UART Tracing Backend
Build a UART-tracing image with:
west build -b mps2/an521 samples/subsys/tracing -- -DCONF_FILE="prj_uart.conf"
or:
west build -b mps2/an521 samples/subsys/tracing -- -DCONF_FILE="prj_uart_ctf.conf"
Note
You may need to set “zephyr,tracing-uart” property under the chosen node in your devicetree. See samples/subsys/tracing/boards/mps2_an521_cpu0.overlay for an example.
After the application has run for a while, check the trace output file.
Usage for USB Tracing Backend
Build a USB-tracing image with:
west build -b sam_e70_xplained/same70q21 samples/subsys/tracing -- -DCONF_FILE="prj_usb.conf"
or:
west build -b sam_e70_xplained/same70q21 samples/subsys/tracing -- -DCONF_FILE="prj_usb_ctf.conf"
After the serial console has stable output like this:
threadA: Hello World!
threadB: Hello World!
threadA: Hello World!
threadB: Hello World!
Connect the board’s USB port to the host device and run the scripts/tracing/trace_capture_usb.py script on the host:
sudo python3 trace_capture_usb.py -v 0x2FE9 -p 0x100 -o channel0_0
The VID and PID of USB device can be configured, just adjusting it accordingly.
Usage for POSIX Tracing Backend
Build a POSIX-tracing image with:
west build -b native_sim samples/subsys/tracing
or:
west build -b native_sim samples/subsys/tracing -- -DCONF_FILE="prj_native_ctf.conf"
After the application has run for a while, check the trace output file.
Usage for USER Tracing Backend
Build a USER-tracing image with:
west build -b qemu_x86 samples/subsys/tracing -- -DCONF_FILE="prj_user.conf"
After the application has run for a while, check the trace output file.
Usage for SEGGER SystemView RTT
Build a SystemView-tracing image with the SystemView RTT Tracing Snippet (rtt-tracing):
west build -b frdm_k64f -S rtt-tracing samples/subsys/tracing
After the application has run for a while, check the trace output file.