The latest development version of this page may be more current than this released 4.0.0 version.

NVMe

NVMe is a standardized logical device interface on PCIe bus exposing storage devices.

NVMe controllers and disks are supported. Disks can be accessed via the Disk Access API they expose and thus be used through the File System API.

Driver design

The driver is sliced up in 3 main parts:

NVMe controller: drivers/disk/nvme/nvme_controller.c
NVMe commands: drivers/disk/nvme/nvme_cmd.c
NVMe namespace: drivers/disk/nvme/nvme_namespace.c

Where the NVMe controller is the root of the device driver. This is the one that will get device driver instances. Note that this is only what DTS describes: the NVMe controller, and none of its namespaces (disks). The NVMe command is the generic logic used to communicate with the controller and the namespaces it exposes. Finally the NVMe namespace is the dedicated part to deal with an actual namespace which, in turn, enables applications accessing each ones through the Disk Access API drivers/disk/nvme/nvme_disk.c.

If a controller exposes more than 1 namespace (disk), it will be possible to raise the amount of built-in namespace support by tweaking the configuration option CONFIG_NVME_MAX_NAMESPACES (see below).

Each exposed disk, via it’s related disk_info structure, will be distinguished by its name which is inherited from it’s related namespace. As such, the disk name follows NVMe naming which is nvme<k>n<n> where k is the controller number and n the namespame number. Most of the time, if only one NVMe disk is plugged into the system, one will see ‘nvme0n0’ as an exposed disk.

NVMe configuration

DTS

Any board exposing an NVMe disk should provide a DTS overlay to enable its use within Zephyr

#include <zephyr/dt-bindings/pcie/pcie.h>
/ {
    pcie0 {
        nvme0: nvme0 {
            compatible = "nvme-controller";
            vendor-id = <VENDOR_ID>;
            device-id = <DEVICE_ID>;
            status = "okay";
        };
    };
};

Where VENDOR_ID and DEVICE_ID are the ones from the exposed NVMe controller.

Options

CONFIG_NVME

Note that NVME requires the target to support PCIe multi-vector MSI-X in order to function.

CONFIG_NVME_MAX_NAMESPACES

Important note for users

NVMe specifications mandate the data buffer to be placed in a dword (4 bytes) aligned address. While this is not a problem for advanced OS managing virtual memory and dynamic allocations below the user processes, this can become an issue in Zephyr as soon as buffer addresses map directly to physical memory.

At this stage then, it is up to the user to make sure the buffer address being provided to disk_access_read() and disk_access_write() are dword aligned.