clock_mchp_subsys_dfll_config Struct Reference

#include <zephyr/drivers/clock_control/mchp_clock_sam_d5x_e5x.h>

Data Fields
bool	on_demand_en
	configure oscillator to ON, when a peripheral is requesting it as a source
bool	run_in_standby_en
	configure oscillator to ON in standby sleep mode, unless on_demand_en is set
bool	closed_loop_en
	Enable closed-loop operation.
enum clock_mchp_gclkgen	src
	Reference source clock selection.
uint32_t	multiply_factor
	Determines the ratio of the CLK_DFLL output frequency to the CLK_DFLL_REF input frequency (0 - 65535)

Field Documentation

closed_loop_en

bool clock_mchp_subsys_dfll_config::closed_loop_en

Enable closed-loop operation.

multiply_factor

uint32_t clock_mchp_subsys_dfll_config::multiply_factor

Determines the ratio of the CLK_DFLL output frequency to the CLK_DFLL_REF input frequency (0 - 65535)

on_demand_en

bool clock_mchp_subsys_dfll_config::on_demand_en

configure oscillator to ON, when a peripheral is requesting it as a source

run_in_standby_en

bool clock_mchp_subsys_dfll_config::run_in_standby_en

configure oscillator to ON in standby sleep mode, unless on_demand_en is set

src

enum clock_mchp_gclkgen clock_mchp_subsys_dfll_config::src

Reference source clock selection.

---

The documentation for this struct was generated from the following file:

• zephyr/drivers/clock_control/mchp_clock_sam_d5x_e5x.h