tisci_msg_fwl_owner Struct Reference

Request and Response for firewall owner change. More...

#include <zephyr/drivers/firmware/tisci/tisci.h>

Data Fields
uint16_t	fwl_id
uint16_t	region
uint8_t	owner_index
uint8_t	owner_privid
uint16_t	owner_permission_bits

Detailed Description

Request and Response for firewall owner change.

Parameters

fwl_id	Firewall ID in question
region	Region or channel number to set config info This field is unused in case of a simple firewall and must be initialized to zero. In case of a region based firewall, this field indicates the region in question. (index starting from 0) In case of a channel based firewall, this field indicates the channel in question (index starting from 0)
n_permission_regs	Number of permission registers <= 3
control	Control register value for this region
owner_index	New owner index to change to. Owner indexes are setup in DMSC firmware boot configuration data
owner_privid	New owner priv-id, used to lookup owner_index is not known, must be set to zero otherwise
owner_permission_bits	New owner permission bits

Field Documentation

fwl_id

uint16_t tisci_msg_fwl_owner::fwl_id

owner_index

uint8_t tisci_msg_fwl_owner::owner_index

owner_permission_bits

uint16_t tisci_msg_fwl_owner::owner_permission_bits

owner_privid

uint8_t tisci_msg_fwl_owner::owner_privid

region

uint16_t tisci_msg_fwl_owner::region

---

The documentation for this struct was generated from the following file:

• zephyr/drivers/firmware/tisci/tisci.h